Astronomical clock
An astronomical clock, horologium, or orloj is a clock with special mechanisms and dials to display astronomical information, such as the relative positions of the Sun, Moon, zodiacal constellations, and major planets.
Definition
The term is loosely used to refer to any clock that shows, in addition to the time of day, astronomical information. This could include the location of the Sun and Moon in the sky, the age and Lunar phases, the position of the Sun on the ecliptic and the current zodiac sign, the sidereal time, and other astronomical data such as the Moon's nodes for indicating eclipses), or a rotating star map. The term should not be confused with an astronomical regulator, a high precision but otherwise ordinary pendulum clock used in observatories.Astronomical clocks usually represent the Solar System using the geocentric model. The center of the dial is often marked with a disc or sphere representing the Earth, located at the center of the Solar System. The Sun is often represented by a golden sphere, shown rotating around the Earth once a day around a 24-hour analog dial. This view accorded both with the daily experience and with the philosophical world view of pre-Copernican Europe.
History
The Antikythera mechanism is the oldest known analog computer and a precursor to astronomical clocks. A complex arrangement of multiple gears and gear trains could perform functions such as determining the position of the sun, moon and planets, predict eclipses and other astronomical phenomena and tracking the dates of Olympic Games. Research in 2011 and 2012 led an expert group of researchers to posit that European astronomical clocks are descended from the technology of the Antikythera mechanism.In the 11th century, the Song dynasty Chinese horologist, mechanical engineer, and astronomer Su Song created a water-driven astronomical clock for his clock-tower of Kaifeng City. Su Song is noted for having incorporated an escapement mechanism and the earliest known endless power-transmitting chain drive for his clock-tower and armillary sphere to function. Contemporary Muslim astronomers and engineers also constructed a variety of highly accurate astronomical clocks for use in their observatories, such as the astrolabic clock by Ibn al-Shatir in the early 14th century.
The early development of mechanical clocks in Europe is not fully understood, but there is general agreement that by 1300–1330 there existed mechanical clocks which were intended for two main purposes: for signalling and notification, and for modelling the solar system. The latter is an inevitable development because the astrolabe was used both by astronomers and astrologers, and it was natural to apply a clockwork drive to the rotating plate to produce a working model of the solar system. American historian Lynn White Jr. of Princeton University wrote:
The astronomical clocks developed by the English mathematician and cleric Richard of Wallingford in St Albans during the 1330s, and by medieval Italian physician and astronomer Giovanni Dondi dell'Orologio in Padua between 1348 and 1364 are masterpieces of their type. They no longer exist, but detailed descriptions of their design and construction survive, and modern reproductions have been made. Wallingford's clock may have shown the sun, moon, stars and planets, and had, in addition, a wheel of fortune and an indicator of the state of the tide at London Bridge. De Dondi's clock was a seven-faced construction with 107 moving parts, showing the positions of the sun, moon, and five planets, as well as religious feast days.
Both these clocks, and others like them, were probably less accurate than their designers would have wished. The gear ratios may have been exquisitely calculated, but their manufacture was somewhat beyond the mechanical abilities of the time, and they never worked reliably. Furthermore, in contrast to the intricate advanced wheelwork, the timekeeping mechanism in nearly all these clocks until the 16th century was the simple verge and foliot escapement, which had errors of at least half an hour a day.
Astronomical clocks were built as demonstration or exhibition pieces, to impress as much as to educate or inform. The challenge of building these masterpieces meant that clockmakers would continue to produce them, to demonstrate their technical skill and their patrons' wealth. The philosophical message of an ordered, heavenly-ordained universe, which accorded with the Gothic-era view of the world, helps explain their popularity.
The growing interest in astronomy during the 18th century revived interest in astronomical clocks, less for the philosophical message, more for the accurate astronomical information that pendulum-regulated clocks could display.
Generic description
Although each astronomical clock is different, they share some common features.Time of day
Most astronomical clocks have a 24-hour analog dial around the outside edge, numbered from I to XII then from I to XII again. The current time is indicated by a golden ball or a picture of the sun at the end of a pointer. Local noon is usually at the top of the dial, and midnight at the bottom. Minute hands are rarely used.The Sun indicator or hand gives an approximate indication of both the Sun's azimuth and altitude. For azimuth, the top of the dial indicates South, and the two VI points of the dial East and West. For altitude, the top is the zenith and the two VI and VI points define the horizon. This interpretation is most accurate at the equinoxes, of course.
If XII is not at the top of the dial, or if the numbers are Arabic rather than Roman, then the time may be shown in Italian hours. In this system, 1 o'clock occurs at sunset, and counting continues through the night and into the next afternoon, reaching 24 an hour before sunset.
In the photograph of the Prague clock shown at the top of the article, the time indicated by the Sun hand is about 9am, or about the 13th hour.
Calendar and zodiac
The year is usually represented by the 12 signs of the zodiac, arranged either as a concentric circle inside the 24-hour dial, or drawn onto a displaced smaller circle, which is a projection of the ecliptic, the path of the Sun and planets through the sky, and the plane of the Earth's orbit.The ecliptic plane is projected onto the face of the clock, and, because of the Earth's tilted angle of rotation relative to its orbital plane, it is displaced from the center and appears to be distorted. The projection point for the stereographic projection is the North pole; on astrolabes the South pole is more common.
The ecliptic dial makes one complete revolution in 23 hours 56 minutes, and will therefore gradually get out of phase with the hour hand, drifting slowly further apart during the year.
To find the date, find the place where the hour hand or Sun disk intersects the ecliptic dial: this indicates the current star sign, the sun's current location on the ecliptic. The intersection point slowly moves around the ecliptic dial during the year, as the Sun moves out of one astrological sign into another.
In the diagram showing the clock face on the right, the Sun's disk has recently moved into Aries, having left Pisces. The date is therefore late March or early April.
If the zodiac signs run around inside the hour hands, either this ring rotates to align itself with the hour hand, or there's another hand, revolving once per year, which points to the Sun's current zodiac sign.
Moon
A dial or ring indicating the numbers 1 to 29 or 30 indicates the moon's age: a new moon is 0, waxes become full around day 15, and then wanes up to 29 or 30. The phase is sometimes shown by a rotating globe or black hemisphere, or a window that reveals part of a wavy black shape beneath.Hour lines
Unequal hours were the result of dividing up the period of daylight into 12 equal hours and nighttime into another 12. There is more daylight in the summer, and less night time, so each of the 12 daylight hours is longer than a night hour. Similarly in winter, daylight hours are shorter, and night hours are longer. These unequal hours are shown by the curved lines radiating from the center. The longer daylight hours in summer can usually be seen at the outer edge of the dial, and the time in unequal hours is read by noting the intersection of the sun hand with the appropriate curved line.Aspects
Astrologers placed importance on how the Sun, Moon, and planets were arranged and aligned in the sky. If certain planets appeared at the points of a triangle, hexagon, or square, or if they were opposite or next to each other, the appropriate aspect was used to determine the event's significance. On some clocks you can see the common aspects – triangle, square, and hexagon – drawn inside the central disc, with each line marked by the symbol for that aspect, and you may also see the signs for conjunction and opposition. On an astrolabe, the corners of the different aspects could be lined up on any of the planets. On a clock, though, the disc containing the aspect lines can't be rotated at will, so they usually show only the aspects of the Sun or Moon.On the Torre dell'Orologio, Brescia clock in northern Italy, the triangle, square, and star in the centre of the dial show these aspects of the moon.
"Dragon" hand: eclipse prediction and lunar nodes
The Moon's orbit is not in the same plane as the Earth's orbit around the Sun but crosses it in two places. The Moon crosses the ecliptic plane twice a month, once when it goes up above the plane, and again 15 or so days later when it goes back down below the ecliptic. These two locations are the ascending and descending lunar nodes. Solar and lunar eclipses will occur only when the Moon is positioned near one of these nodes because at other times the Moon is either too high or too low for an eclipse to be seen on the Earth.Some astronomical clocks keep track of the position of the lunar nodes with a long pointer that crosses the dial, with its length extended out to both sides of the dial to pointing at two opposite points on the solar or lunar dial. This so-called "dragon" hand makes one complete rotation around the ecliptic dial every 19 years. It is sometimes decorated with the figure of a serpent or lizard with its snout and tail-tip touching the outer dial, traditionally labelled ' and ' even if the decorative dragon is omitted.
During the two yearly eclipse seasons the Sun pointer coincides with either the dragon's snout or tail. When the dragon hand and the full Moon coincide, the Moon is on the same plane as the Earth and Sun, and so there is a good chance that a lunar eclipse will be visible on one side of the Earth. When the new Moon is aligned with the dragon hand there is a moderate possibility that a solar eclipse might be visible somewhere on the Earth.