Biological pest control
Biological control or biocontrol is a method of controlling pests, whether pest animals such as insects and mites, weeds, or pathogens affecting animals or plants by using other organisms. It relies on predation, parasitism, herbivory, or other natural mechanisms, but typically also involves an active human management role. It can be an important component of integrated pest management programs. Invertebrates and other macroorganisms are registered as biological control agents by the authorities in the US and Europe very differently to microorganisms, which are registered as biopesticides.
There are three basic strategies for biological control: classical, where a natural enemy of a pest is introduced in the hope of achieving control; inductive, in which a large population of natural enemies are administered for quick pest control; and inoculative, in which measures are taken to maintain natural enemies through regular reestablishment.
Natural enemies of insects play an important part in limiting the densities of potential pests. Biological control agents such as these include predators, parasitoids, pathogens, and competitors. Biological control agents of plant diseases are most often referred to as antagonists. Biological control agents of weeds include seed predators, herbivores, and plant pathogens.
Biological control can have side-effects on biodiversity through attacks on non-target species by any of the above mechanisms, especially when a species is introduced without a thorough understanding of the possible consequences.
History
The term "biological control" was first used by Harry Scott Smith at the 1919 meeting of the Pacific Slope Branch of the American Association of Economic Entomologists, in Riverside, California. It was brought into more widespread use by the entomologist Paul H. DeBach who worked on citrus crop pests throughout his life. However, the practice has previously been used for centuries. The first report of the use of an insect species to control an insect pest comes from "Nanfang Caomu Zhuang" , attributed to Western Jin dynasty botanist Ji Han, in which it is mentioned that "Jiaozhi people sell ants and their nests attached to twigs looking like thin cotton envelopes, the reddish-yellow ant being larger than normal. Without such ants, southern citrus fruits will be severely insect-damaged". The ants used are known as huang gan ants. The practice was later reported by Ling Biao Lu Yi, in Ji Le Pian by Zhuang Jisu, in the Book of Tree Planting by Yu Zhen Mu, in the book Guangdong Xing Yu, Lingnan by Wu Zhen Fang, in Nanyue Miscellanies by Li Diao Yuan, and others.Biological control techniques as we know them today started to emerge in the 1870s. During this decade, in the US, the Missouri State Entomologist C. V. Riley and the Illinois State Entomologist W. LeBaron began within-state redistribution of parasitoids to control crop pests. The first international shipment of an insect as a biological control agent was made by Charles V. Riley in 1873, shipping to France the predatory mites Tyroglyphus phylloxera to help fight the grapevine phylloxera that was destroying grapevines in France. The United States Department of Agriculture initiated research in classical biological control following the establishment of the Division of Entomology in 1881, with C. V. Riley as Chief. The first importation of a parasitoidal wasp into the United States was that of the braconid Cotesia glomerata in 1883–1884, imported from Europe to control the invasive cabbage white butterfly, Pieris rapae. In 1888–1889 the vedalia beetle, Novius cardinalis, a lady beetle, was introduced from Australia to California to control the cottony cushion scale, Icerya purchasi. This had become a major problem for the newly developed citrus industry in California, but by the end of 1889, the cottony cushion scale population had already declined. This great success led to further introductions of beneficial insects into the US.
In 1905 the USDA initiated its first large-scale biological control program, sending entomologists to Europe and Japan to look for natural enemies of the spongy moth, Lymantria dispar dispar, and the brown-tail moth, Euproctis chrysorrhoea, invasive pests of trees and shrubs. As a result, nine parasitoids of the spongy moth, seven of the brown-tail moth, and two predators of both moths became established in the US. Although the spongy moth was not fully controlled by these natural enemies, the frequency, duration, and severity of its outbreaks were reduced and the program was regarded as successful. This program also led to the development of many concepts, principles, and procedures for the implementation of biological control programs.
File:Larvaefeedingoncacti.jpg|thumb|upright|Cactoblastis cactorum larvae feeding on Opuntia prickly pear cacti
Prickly pear cacti were introduced into Queensland, Australia as ornamental plants, starting in 1788. They quickly spread to cover over 25 million hectares of Australia by 1920, increasing by 1 million hectares per year. Digging, burning, and crushing all proved ineffective. Two control agents were introduced to help control the spread of the plant, the cactus moth Cactoblastis cactorum, and the scale insect Dactylopius. Between 1926 and 1931, tens of millions of cactus moth eggs were distributed around Queensland with great success, and by 1932, most areas of prickly pear had been destroyed.
The first reported case of a classical biological control attempt in Canada involves the parasitoidal wasp Trichogramma minutum. Individuals were caught in New York State and released in Ontario gardens in 1882 by William Saunders, a trained chemist and first Director of the Dominion Experimental Farms, for controlling the invasive currantworm Nematus ribesii. Between 1884 and 1908, the first Dominion Entomologist, James Fletcher, continued introductions of other parasitoids and pathogens for the control of pests in Canada.
Types of biological pest control
There are three basic biological pest control strategies: importation, augmentation and conservation.Importation
Importation or classical biological control involves the introduction of a pest's natural enemies to a new locale where they do not occur naturally. Early instances were often unofficial and not based on research, and some introduced species became serious pests themselves.To be most effective at controlling a pest, a biological control agent requires a colonizing ability which allows it to keep pace with changes to the habitat in space and time. Control is greatest if the agent has temporal persistence so that it can maintain its population even in the temporary absence of the target species, and if it is an opportunistic forager, enabling it to rapidly exploit a pest population.
One of the earliest successes was in controlling Icerya purchasi in Australia, using a predatory insect Rodolia cardinalis. This success was repeated in California using the beetle and a parasitoidal fly, Cryptochaetum iceryae. Other successful cases include the control of Antonina graminis in Texas by Neodusmetia sangwani in the 1960s.
Damage from Hypera postica, the alfalfa weevil, a serious introduced pest of forage, was substantially reduced by the introduction of natural enemies. 20 years after their introduction the population of weevils in the alfalfa area treated for alfalfa weevil in the Northeastern United States remained 75 percent down.
Image:Alternanthera philoxeroides NRCS-1.jpg|thumb|The invasive species Alternanthera philoxeroides was controlled in Florida by introducing alligator weed flea beetle.
Alligator weed was introduced to the United States from South America. It takes root in shallow water, interfering with navigation, irrigation, and flood control. The alligator weed flea beetle and two other biological controls were released in Florida, greatly reducing the amount of land covered by the plant. Another aquatic weed, the giant salvinia is a serious pest, covering waterways, reducing water flow and harming native species. Control with the salvinia weevil and the salvinia stem-borer moth is effective in warm climates, and in Zimbabwe, a 99% control of the weed was obtained over a two-year period.
Small, commercially-reared parasitoidal wasps, Trichogramma ostriniae, provide limited and erratic control of the European corn borer, a serious pest. Careful formulations of the bacterium Bacillus thuringiensis are more effective. The O. nubilalis integrated control releasing Tricogramma brassicae and later Bacillus thuringiensis subs. kurstaki reduce pest damages more than insecticide treatments
The population of Levuana iridescens'', the Levuana moth, a serious coconut pest in Fiji, was brought under control by a classical biological control program in the 1920s.
Augmentation
Augmentation involves the supplemental release of natural enemies that occur in a particular area, boosting the naturally occurring populations there. In inoculative release, small numbers of the control agents are released at intervals to allow them to reproduce, in the hope of setting up longer-term control and thus keeping the pest down to a low level, constituting prevention rather than cure. In inundative release, in contrast, large numbers are released in the hope of rapidly reducing a damaging pest population, correcting a problem that has already arisen. Augmentation can be effective, but is not guaranteed to work, and depends on the precise details of the interactions between each pest and control agent.An example of inoculative release occurs in the horticultural production of several crops in greenhouses. Periodic releases of the parasitoidal wasp, Encarsia formosa, are used to control greenhouse whitefly, while the predatory mite Phytoseiulus persimilis is used for control of the two-spotted spider mite.
The egg parasite Trichogramma is frequently released inundatively to control harmful moths. New way for inundative releases are now introduced i.e. use of drones. Egg parasitoids are able to find the eggs of the target host by means of several cues. Kairomones were found on moth scales. Similarly, Bacillus thuringiensis and other microbial insecticides are used in large enough quantities for a rapid effect. Recommended release rates for Trichogramma in vegetable or field crops range from 5,000 to 200,000 per acre per week according to the level of pest infestation. Similarly, nematodes that kill insects are released at rates of millions and even billions per acre for control of certain soil-dwelling insect pests.