Precision 23
The Precision 23 is an American trailerable sailboat that was designed by Jim Taylor.
Production
The boat was first built by Precision Boat Works in the United States in 1986 and remained in production until 2018. Over 500 examples were completed.Design
The Precision 23 is a small recreational keelboat, built predominantly of fiberglass, with teak wood trim. It has a fractional sloop rig, a transom-hung rudder and a fixed stub keel with a retractable centerboard that is raised and lowered by a Dacron line, plus a "kick-up" rudder. It displaces and carries of lead ballast. The cockpit is long.The boat is constructed using a hand-laid fiberglassing method and sleeps four adults. The galley includes a stainless steel sink, an alcohol-fired stove and a self-contained fresh water system, with a manual pump. A Igloo Coolers ice chest with a teak wood step is also standard equipment.
The boat has a draft of with the fiberglass centerboard extended and with it retracted, allowing beaching or ground transportation on a trailer.
The boat is normally fitted with a small outboard motor for docking and maneuvering.
The design has sleeping accommodation for five people, with a double "V"-berth in the bow cabin, two straight settees in the main cabin and an aft quarter berth on the port side. The galley is located on the starboard side just behind the companionway ladder. The galley is equipped with a two-burner stove and a sink. The head is located under the bow cabin "V"-berth. Cabin headroom is.
The design has a PHRF racing average handicap of 228 and a hull speed of.