Moto Morini
Moto Morini is an Italian motorcycle manufacturer founded by Alfonso Morini in Bologna, in 1937.
Earlier, Morini had also manufactured motorcycles together with Mario Mazzetti under the name MM. Moto Morini came under Cagiva control in 1987, then in 1996 joined Texas Pacific Group, which had also bought Ducati, and in April 1999, the rights to the name were purchased by Morini Franco Motori spa, a company which had been founded by Morini's nephew in 1954. After building large v-twin motorcycles early in the 21st century the company went into liquidation in late 2010. Moto Morini restarted motorcycle production in 2012.
History
Alfonso Morini was born on 22 January 1898. Before he was 16 he was repairing motorcycles, and at the age of sixteen, opened a workshop. This was just before World War I broke out. During the war he was with the 8th Motorcycles Unit, stationed at Padua.MM
In 1925 Mauro Mazzetti, impressed by Alfonso's work, asked him to build a single-cylinder 120 cc two-stroke racing bike, making Alfonso the designer, constructor, and racer. They were successful racing, under the MM name, and Alfonso's finest racing moment came in 1927 when his MM 125 took six world records at Monza, during the Grand Prix of Nations. In 1933 he set a new world speed record for 175 cc motorcycles of 162 km/h.Moto Morini three wheelers
In 1937 Alfonso and Mauro parted ways, and Alfonso Morini went into the production of 350 cc and 500 cc three wheelers, under the Moto Morini name. The government regulations favoured these lighter fuel efficient machines, and the successful Moto Morini M610 had advanced features, like cardan driveshafts.This was interrupted by World War II, and Moto Morini was converted to produce aeronautical components. In 1943 the factory was bombed.
Motorcycles
Undeterred, in 1946, a new three-speed transmission, single cylinder, two-stroke T125 emerged from the new Bologna factory, Via Berti. In 1947 a Sport version appeared. In 1953 a 175 cc pushrod OHV four-stroke model appeared in production. Models like Gran Turismo, Settebello, Rebello, Supersport, Briscola, Tresette, and Tresette Sprint also appeared. In 1956 Moto Morini moved to a larger production facility at Via Bergami. In 1958 Alfonso Morini, Dante Lambertini, and Nerio Biavati designed the 250 GP Double Camshaft.On 30 June 1969 Alfonso Morini died. He was 71. His daughter, Gabriella Morini, took over management, and would remain in control until 1986. In 1970 Franco Lambertini left Ferrari works and joined Moto Morini.
Competition history
In 1948, Raffaele Alberti won the Italian Championship for Lightweight Motorcycles on a two-stroke 125 Competition. Umberto Masetti won the Italian Championship for Lightweight Motorcycles in 1949, on a 125 SOHC four-stroke that produced @ 10000 rpm, and could exceed. In 1952 Moto Morini won races outside of Italy with the 125 SOHC four-stroke, as Emilio Mendogni won both the Nations Grand Prix, and the Spanish Grand Prix. The 250 GP put out @ 11,000 rpm and had a maximum speed of.In 1961, Giacomo Agostini began his racing career on a Moto Morini Settebello “Short Rods”, coming second at Trento-Bondone. Agostini was Italian Cadet Champion in 1962, and Italian Junior Champion in 1963. Tarquinio Provini, riding a Moto Morini 250 GP, won the Italian Championship in 1961 and 1962. In 1963, Provini convinced Alfonso Morini that they should try for the World Championship. Provini waged a season-long battle with Honda's Jim Redman for the 250 world championship. Each rider won four races, and the title was not decided until the final race in Japan. The Japanese team would not let Provini practice before the race, to hinder Morini's chances. Redman won the championship over Provini by only two points. The single cylinder 250 Morini is still the fastest single cylinder four-stroke 250cc racer to this day.
Moto Morini 350 & 500 V-twins
In 1973, Moto Morini launched its first 72-degree V-twin engined motorcycles, designed by Franco Lambertini, and created by Franco and Gino Marchesini. The 350 Sport and Strada models displaced 344 cc and were complemented in 1977 by 500 cc Sport and Strada models. Equipment on the models was of high specification, and when released the Morini 3½ was around the same price as a Honda CB750.The Morini 3½ still has a loyal following, and a number of spare parts are available from specialist firms. The former editor of Classic Bike magazine, veteran motorcycle writer Hugo Wilson, has owned a 3½ Sport since 1982, and was still using it as a regular commuter machine in 2010.
The engine has Heron heads, which were milled flat, and the combustion chamber is recessed in the piston crown, aiding combustion and returning excellent fuel economy. A fuel consumption test by Motorcycling Monthly at Britain's Motor Industry Research Association in 1976 returned a performance of, while a 3½ bike carried rider and pillion passenger. The engine also incorporated one piece forged steel crankshaft, ball main bearings, plain big end bearings, and the conrods run on a common pin, desaxe, and off-setting the cylinders to each other by. Front and rear barrels and heads are interchangeable. VBH Dell'Orto square slide carburettors were fitted to the 350, with air fed via air-box with two filters. Bore and stroke was, respectively. The camshaft was driven by a small toothed belt, and was a revolutionary advance. They also included an electronic capacitor discharge ignition system designed by Ducati Elettronica. Early models had kick-start only but later ones also included a starter motor using three centrifugal friction shoes engaging the alternator rotor cover. The CDI ignition was powered by a coil in the alternator and using the kick-start a bike could be started and ridden with a flat battery.
The frame is a full steel duplex swingarm design, with Ceriani rear suspension, and Marzocchi front forks. The early models had a twin leading shoe drum brake up front that was notoriously grabby on the Borrani spoked wheels, but these were replaced with a single chromed Grimeca disc in 1976, and later optional double discs. The rear drum brake was replaced in the early 1980s with a Grimeca disc. Switchgear, tail and brake lights were standard CEV items used on many Italian motorcycles of the 1970s. The month and year of manufacture is embossed in small figures on the side of each cast wheel, near where one of the seven cast spokes meets the rim. The helical gear transmission was a six-speed, with a top gear ratio of 1:0.954, making it akin to an overdrive. The transmission was engaged with a six-plate dry clutch, making a characteristic rattle similar to Ducatis when disengaged. Secondary drive was by a 5/8 x 3/8-inch chain to a rear sprocket with cush drive. Gear change is by right foot and the rear brake operated by left foot. Engine lubrication was by oil pump to the crankshaft but no force lubrication went to the rocker gear. Instead, crankcase pressure forced oil mist up the short pushrod tunnels to the rocker covers, where two 'crow's feet' allowed mist to condense and drip onto the rocker gear. Although ingenious, it required riders to gentle warm up their engines before using maximum revs, redlined at 9,200 rpm. Oil filtration was by plastic mesh filter.
The 1979 model incorporated a moulded tank-hugging seat, black crankcase side covers and a black exhaust system in homage to the Moto Guzzi Le Mans.
Footrests were placed too far forward for many riders and a common modification was to replace them with rearset footrests. Although not suitable for large riders, the 3½ was renowned for sharp and impeccable handling and was able to compete against larger capacity motorbikes on twisty roads. Maximum torque was above 6,000 rpm and so required high revving, similar to a two-stroke, to make the most of the engine's characteristics. Nevertheless, a 3½ Sport could still return when ridden hard. The 3½ Sport had a higher compression ratio than the softer-tuned Strada. The Sport featured Tomaselli clip-ons handlebars and throttle, a steering damper and Veglia instruments.
In November 1981 a 500 Turbo was shown at the Milan Show, producing at 8,300 rpm. It did not make it to production. An enduro version called the Camel 500 was released in 1981. In 1983 the Kanguro 350 was released.
In 1986 Moto Morini brought out a cruiser version, the Excalibur, available in 350 and 500 versions.
The 350 was conceived as a modular design, and single cylinder versions were made. These were the 1975 six-speed 125 H and the 1978 250 T Mono, both unsuccessful, as was the later KJ 125 single of 1985.
350 performance figures
- Strada @ 8,000 rpm top speed 162kmh
- Sport @ 8,500 rpm, @ 6,100 rpm.
- Top Speed 175kmh
500 performance figures
- @7,500 rpm
- Sport top Speed 172kmh
- Sport dry weight
Cagiva
In 1988 the Dart 350, a fully race-faired version of the 72° V-twin, appeared. A 400 version was made in a small batch for the Japanese marked. In 1989 the last enduro version, the Coguaro appeared, in 350 and 500 versions, and another cruiser version, the New York, also in both capacities. These were extensions of other models, and little to no development was being undertaken.
Franco Lambertini had a new 60° engine design, but Cagiva was not interested. In the same year as the last models appeared, he left Moto Morini, and went to Piaggio-Gilera.
The Via Bergami factory was closed and by 1993 Excaliburs are assembled at Agostini works.
In 1996 Ducati and the Moto Morini name are sold to TPG. There were no plans to revive Moto Morini.