# Cartesian coordinate system

A

**Cartesian coordinate system**is a coordinate system that specifies each point uniquely in a plane by a set of numerical

**coordinates**, which are the signed distances to the point from two fixed perpendicular oriented lines, measured in the same unit of length. Each reference line is called a

*coordinate axis*or just

*axis*of the system, and the point where they meet is its

*origin*, at ordered pair. The coordinates can also be defined as the positions of the perpendicular projections of the point onto the two axes, expressed as signed distances from the origin.

One can use the same principle to specify the position of any point in three-dimensional space by three Cartesian coordinates, its signed distances to three mutually perpendicular planes. In general,

*n*Cartesian coordinates specify the point in an

*n*-dimensional Euclidean space for any dimension

*n*. These coordinates are equal, up to sign, to distances from the point to

*n*mutually perpendicular hyperplanes.

The invention of Cartesian coordinates in the 17th century by René Descartes revolutionized mathematics by providing the first systematic link between Euclidean geometry and algebra. Using the Cartesian coordinate system, geometric shapes can be described by

**Cartesian equations**: algebraic equations involving the coordinates of the points lying on the shape. For example, a circle of radius 2, centered at the origin of the plane, may be described as the set of all points whose coordinates

*x*and

*y*satisfy the equation.

Cartesian coordinates are the foundation of analytic geometry, and provide enlightening geometric interpretations for many other branches of mathematics, such as linear algebra, complex analysis, differential geometry, multivariate calculus, group theory and more. A familiar example is the concept of the graph of a function. Cartesian coordinates are also essential tools for most applied disciplines that deal with geometry, including astronomy, physics, engineering and many more. They are the most common coordinate system used in computer graphics, computer-aided geometric design and other geometry-related data processing.

## History

The adjective*Cartesian*refers to the French mathematician and philosopher René Descartes, who published this idea in 1637. It was independently discovered by Pierre de Fermat, who also worked in three dimensions, although Fermat did not publish the discovery. The French cleric Nicole Oresme used constructions similar to Cartesian coordinates well before the time of Descartes and Fermat.

Both Descartes and Fermat used a single axis in their treatments and have a variable length measured in reference to this axis. The concept of using a pair of axes was introduced later, after Descartes'

*La Géométrie*was translated into Latin in 1649 by Frans van Schooten and his students. These commentators introduced several concepts while trying to clarify the ideas contained in Descartes' work.

The development of the Cartesian coordinate system would play a fundamental role in the development of the calculus by Isaac Newton and Gottfried Wilhelm Leibniz. The two-coordinate description of the plane was later generalized into the concept of vector spaces.

Many other coordinate systems have been developed since Descartes, such as the polar coordinates for the plane, and the spherical and cylindrical coordinates for three-dimensional space.

## Description

### One dimension

Choosing a Cartesian coordinate system for a one-dimensional space—that is, for a straight line—involves choosing a point*O*of the line, a unit of length, and an orientation for the line. An orientation chooses which of the two half-lines determined by

*O*is the positive, and which is negative; we then say that the line "is oriented" from the negative half towards the positive half. Then each point

*P*of the line can be specified by its distance from

*O*, taken with a + or − sign depending on which half-line contains

*P*.

A line with a chosen Cartesian system is called a

**number line**. Every real number has a unique location on the line. Conversely, every point on the line can be interpreted as a number in an ordered continuum such as the real numbers.

### Two dimensions

A Cartesian coordinate system in two dimensions is defined by an ordered pair of perpendicular lines, a single unit of length for both axes, and an orientation for each axis. The point where the axes meet is taken as the origin for both, thus turning each axis into a number line. For any point*P*, a line is drawn through

*P*perpendicular to each axis, and the position where it meets the axis is interpreted as a number. The two numbers, in that chosen order, are the

*Cartesian coordinates*of

*P*. The reverse construction allows one to determine the point

*P*given its coordinates.

The first and second coordinates are called the

*abscissa*and the

*ordinate*of

*P*, respectively; and the point where the axes meet is called the

*origin*of the coordinate system. The coordinates are usually written as two numbers in parentheses, in that order, separated by a comma, as in. Thus the origin has coordinates, and the points on the positive half-axes, one unit away from the origin, have coordinates and.

In mathematics, physics, and engineering, the first axis is usually defined or depicted as horizontal and oriented to the right, and the second axis is vertical and oriented upwards. The origin is often labeled

*O*, and the two coordinates are often denoted by the letters

*X*and

*Y*, or

*x*and

*y*. The axes may then be referred to as the

*X*-axis and

*Y*-axis. The choices of letters come from the original convention, which is to use the latter part of the alphabet to indicate unknown values. The first part of the alphabet was used to designate known values.

A Euclidean plane with a chosen Cartesian coordinate system is called a

*Cartesian plane*. In a Cartesian plane one can define canonical representatives of certain geometric figures, such as the unit circle, the unit square, the unit hyperbola, and so on.

The two axes divide the plane into four right angles, called

*quadrants*. The quadrants may be named or numbered in various ways, but the quadrant where all coordinates are positive is usually called the

*first quadrant*.

If the coordinates of a point are, then its distances from the

*X*-axis and from the

*Y*-axis are |

*y*| and |

*x*|, respectively; where |...| denotes the absolute value of a number.

### Three dimensions

A Cartesian coordinate system for a three-dimensional space consists of an ordered triplet of lines that go through a common point, and are pair-wise perpendicular; an orientation for each axis; and a single unit of length for all three axes. As in the two-dimensional case, each axis becomes a number line. For any point*P*of space, one considers a hyperplane through

*P*perpendicular to each coordinate axis, and interprets the point where that hyperplane cuts the axis as a number. The Cartesian coordinates of

*P*are those three numbers, in the chosen order. The reverse construction determines the point

*P*given its three coordinates.

Alternatively, each coordinate of a point

*P*can be taken as the distance from

*P*to the hyperplane defined by the other two axes, with the sign determined by the orientation of the corresponding axis.

Each pair of axes defines a

*coordinate hyperplane*. These hyperplanes divide space into eight trihedra, called

*octants*.

The octants are: | | | | | | | | |

The coordinates are usually written as three numbers surrounded by parentheses and separated by commas, as in or. Thus, the origin has coordinates, and the unit points on the three axes are,, and.

There are no standard names for the coordinates in the three axes. The coordinates are often denoted by the letters

*X*,

*Y*, and

*Z*, or

*x*,

*y*, and

*z*. The axes may then be referred to as the

*X*-axis,

*Y*-axis, and

*Z*-axis, respectively. Then the coordinate hyperplanes can be referred to as the

*XY*-plane,

*YZ*-plane, and

*XZ*-plane.

In mathematics, physics, and engineering contexts, the first two axes are often defined or depicted as horizontal, with the third axis pointing up. In that case the third coordinate may be called

*height*or

*altitude*. The orientation is usually chosen so that the 90 degree angle from the first axis to the second axis looks counter-clockwise when seen from the point ; a convention that is commonly called

*the right hand rule*.

### Higher dimensions

Since Cartesian coordinates are unique and non-ambiguous, the points of a Cartesian plane can be identified with pairs of real numbers; that is with the Cartesian product, where is the set of all real numbers. In the same way, the points in any Euclidean space of dimension*n*be identified with the tuples of

*n*real numbers, that is, with the Cartesian product.

### Generalizations

The concept of Cartesian coordinates generalizes to allow axes that are not perpendicular to each other, and/or different units along each axis. In that case, each coordinate is obtained by projecting the point onto one axis along a direction that is parallel to the other axis. In such an**oblique coordinate system**the computations of distances and angles must be modified from that in standard Cartesian systems, and many standard formulas do not hold.

## Notations and conventions

The Cartesian coordinates of a point are usually written in parentheses and separated by commas, as in or. The origin is often labelled with the capital letter*O*. In analytic geometry, unknown or generic coordinates are often denoted by the letters in the plane, and in three-dimensional space. This custom comes from a convention of algebra, which uses letters near the end of the alphabet for unknown values, and letters near the beginning for given quantities.

These conventional names are often used in other domains, such as physics and engineering, although other letters may be used. For example, in a graph showing how a pressure varies with time, the graph coordinates may be denoted

*p*and

*t*. Each axis is usually named after the coordinate which is measured along it; so one says the

*x-axis*, the

*y-axis*, the

*t-axis*, etc.

Another common convention for coordinate naming is to use subscripts, as for the

*n*coordinates in an

*n*-dimensional space, especially when

*n*is greater than 3 or unspecified. Some authors prefer the numbering. These notations are especially advantageous in computer programming: by storing the coordinates of a point as an array, instead of a record, the subscript can serve to index the coordinates.

In mathematical illustrations of two-dimensional Cartesian systems, the first coordinate is measured along a horizontal axis, oriented from left to right. The second coordinate is then measured along a vertical axis, usually oriented from bottom to top. Young children learning the Cartesian system, commonly learn the order to read the values before cementing the

*x*-,

*y*-, and

*z*-axis concepts, by starting with 2D mnemonics.

Computer graphics and image processing, however, often use a coordinate system with the

*y*-axis oriented downwards on the computer display. This convention developed in the 1960s from the way that images were originally stored in display buffers.

For three-dimensional systems, a convention is to portray the

*xy*-plane horizontally, with the

*z*-axis added to represent height. Furthermore, there is a convention to orient the

*x*-axis toward the viewer, biased either to the right or left. If a diagram shows the

*x*- and

*y*-axis horizontally and vertically, respectively, then the

*z*-axis should be shown pointing "out of the page" towards the viewer or camera. In such a 2D diagram of a 3D coordinate system, the

*z*-axis would appear as a line or ray pointing down and to the left or down and to the right, depending on the presumed viewer or camera perspective. In any diagram or display, the orientation of the three axes, as a whole, is arbitrary. However, the orientation of the axes relative to each other should always comply with the right-hand rule, unless specifically stated otherwise. All laws of physics and math assume this [|right-handedness], which ensures consistency.

For 3D diagrams, the names "abscissa" and "ordinate" are rarely used for

*x*and

*y*, respectively. When they are, the

*z*-coordinate is sometimes called the

**applicate**. The words

*abscissa*,

*ordinate*and

*applicate*are sometimes used to refer to coordinate axes rather than the coordinate values.

### Quadrants and octants

The axes of a two-dimensional Cartesian system divide the plane into four infinite regions, called**quadrants**, each bounded by two half-axes. These are often numbered from 1st to 4th and denoted by Roman numerals: I, II, III, and IV. When the axes are drawn according to the mathematical custom, the numbering goes counter-clockwise starting from the upper right quadrant.

Similarly, a three-dimensional Cartesian system defines a division of space into eight regions or

**octants**, according to the signs of the coordinates of the points. The convention used for naming a specific octant is to list its signs, e.g. or. The generalization of the quadrant and octant to an arbitrary number of dimensions is the

**orthant**, and a similar naming system applies.

## Cartesian formulae for the plane

### Distance between two points

The Euclidean distance between two points of the plane with Cartesian coordinates and isThis is the Cartesian version of Pythagoras's theorem. In three-dimensional space, the distance between points and is

which can be obtained by two consecutive applications of Pythagoras' theorem.

### Euclidean transformations

The Euclidean transformations or**Euclidean motions**are the mappings of points of the Euclidean plane to themselves which preserve distances between points. There are four types of these mappings : translations, rotations, reflections and glide reflections.

#### Translation

a set of points of the plane, preserving the distances and directions between them, is equivalent to adding a fixed pair of numbers to the Cartesian coordinates of every point in the set. That is, if the original coordinates of a point are, after the translation they will be#### Rotation

To rotate a figure counterclockwise around the origin by some angle is equivalent to replacing every point with coordinates by the point with coordinates, whereThus:

#### Reflection

If are the Cartesian coordinates of a point, then are the coordinates of its reflection across the second coordinate axis, as if that line were a mirror. Likewise, are the coordinates of its reflection across the first coordinate axis. In more generality, reflection across a line through the origin making an angle with the x-axis, is equivalent to replacing every point with coordinates by the point with coordinates, whereThus:

#### Glide reflection

A glide reflection is the composition of a reflection across a line followed by a translation in the direction of that line. It can be seen that the order of these operations does not matter.#### General matrix form of the transformations

These Euclidean transformations of the plane can all be described in a uniform way by using matrices. The result of applying a Euclidean transformation to a point is given by the formulawhere

*A*is a 2×2 orthogonal matrix and is an arbitrary ordered pair of numbers; that is,

where

To be

*orthogonal*, the matrix

*A*must have orthogonal rows with same Euclidean length of one, that is,

and

This is equivalent to saying that

*A*times its transpose must be the identity matrix. If these conditions do not hold, the formula describes a more general affine transformation of the plane provided that the determinant of

*A*is not zero.

The formula defines a translation if and only if

*A*is the identity matrix. The transformation is a rotation around some point if and only if

*A*is a rotation matrix, meaning that

A reflection or glide reflection is obtained when,

Assuming that translation is not used transformations can be combined by simply multiplying the associated transformation matrices.

#### Affine transformation

Another way to represent coordinate transformations in Cartesian coordinates is through affine transformations. In affine transformations an extra dimension is added and all points are given a value of 1 for this extra dimension. The advantage of doing this is that point translations can be specified in the final column of matrix*A*. In this way, all of the euclidean transformations become transactable as matrix point multiplications. The affine transformation is given by:

Using affine transformations multiple different euclidean transformations including translation can be combined by simply multiplying the corresponding matrices.

#### Scaling

An example of an affine transformation which is not a Euclidean motion is given by scaling. To make a figure larger or smaller is equivalent to multiplying the Cartesian coordinates of every point by the same positive number*m*. If are the coordinates of a point on the original figure, the corresponding point on the scaled figure has coordinates

If

*m*is greater than 1, the figure becomes larger; if

*m*is between 0 and 1, it becomes smaller.

#### Shearing

A shearing transformation will push the top of a square sideways to form a parallelogram. Horizontal shearing is defined by:Shearing can also be applied vertically:

## Orientation and handedness

### In two dimensions

Fixing or choosing the*x*-axis determines the

*y*-axis up to direction. Namely, the

*y*-axis is necessarily the perpendicular to the

*x*-axis through the point marked 0 on the

*x*-axis. But there is a choice of which of the two half lines on the perpendicular to designate as positive and which as negative. Each of these two choices determines a different orientation of the Cartesian plane.

The usual way of orienting the plane, with the positive

*x*-axis pointing right and the positive

*y*-axis pointing up, is considered the

*positive*or

*standard*orientation, also called the

*right-handed*orientation.

A commonly used mnemonic for defining the positive orientation is the

*right-hand rule*. Placing a somewhat closed right hand on the plane with the thumb pointing up, the fingers point from the

*x*-axis to the

*y*-axis, in a positively oriented coordinate system.

The other way of orienting the plane is following the

*left hand rule*, placing the left hand on the plane with the thumb pointing up.

When pointing the thumb away from the origin along an axis towards positive, the curvature of the fingers indicates a positive rotation along that axis.

Regardless of the rule used to orient the plane, rotating the coordinate system will preserve the orientation. Switching any two axes will reverse the orientation, but switching both will leave the orientation unchanged.

### In three dimensions

Once the*x*- and

*y*-axes are specified, they determine the line along which the

*z*-axis should lie, but there are two possible orientation for this line. The two possible coordinate systems which result are called 'right-handed' and 'left-handed'. The standard orientation, where the

*xy*-plane is horizontal and the

*z*-axis points up is called

**right-handed**or

**positive**.

The name derives from the right-hand rule. If the index finger of the right hand is pointed forward, the middle finger bent inward at a right angle to it, and the thumb placed at a right angle to both, the three fingers indicate the relative orientation of the

*x*-,

*y*-, and

*z*-axes in a

*right-handed*system. The thumb indicates the

*x*-axis, the index finger the

*y*-axis and the middle finger the

*z*-axis. Conversely, if the same is done with the left hand, a left-handed system results.

Figure 7 depicts a left and a right-handed coordinate system. Because a three-dimensional object is represented on the two-dimensional screen, distortion and ambiguity result. The axis pointing downward is also meant to point

*towards*the observer, whereas the "middle"-axis is meant to point

*away*from the observer. The red circle is

*parallel*to the horizontal

*xy*-plane and indicates rotation from the

*x*-axis to the

*y*-axis. Hence the red arrow passes

*in front of*the

*z*-axis.

Figure 8 is another attempt at depicting a right-handed coordinate system. Again, there is an ambiguity caused by projecting the three-dimensional coordinate system into the plane. Many observers see Figure 8 as "flipping in and out" between a cube and a "corner". This corresponds to the two possible orientations of the space. Seeing the figure as convex gives a left-handed coordinate system. Thus the "correct" way to view Figure 8 is to imagine the

*x*-axis as pointing

*towards*the observer and thus seeing a concave corner.

## Representing a vector in the standard basis

A point in space in a Cartesian coordinate system may also be represented by a position vector, which can be thought of as an arrow pointing from the origin of the coordinate system to the point. If the coordinates represent spatial positions, it is common to represent the vector from the origin to the point of interest as. In two dimensions, the vector from the origin to the point with Cartesian coordinates can be written as:where, and are unit vectors in the direction of the

*x*-axis and

*y*-axis respectively, generally referred to as the

*standard basis*. Similarly, in three dimensions, the vector from the origin to the point with Cartesian coordinates can be written as:

where is the unit vector in the direction of the z-axis.

There is no

*natural*interpretation of multiplying vectors to obtain another vector that works in all dimensions, however there is a way to use complex numbers to provide such a multiplication. In a two dimensional cartesian plane, identify the point with coordinates with the complex number. Here,

**i**is the imaginary unit and is identified with the point with coordinates, so it is

**not**the unit vector in the direction of the

*x*-axis. Since the complex numbers can be multiplied giving another complex number, this identification provides a means to "multiply" vectors. In a three dimensional cartesian space a similar identification can be made with a subset of the quaternions.

## Applications

Cartesian coordinates are an abstraction that have a multitude of possible applications in the real world. However, three constructive steps are involved in superimposing coordinates on a problem application. 1) Units of distance must be decided defining the spatial size represented by the numbers used as coordinates. 2) An origin must be assigned to a specific spatial location or landmark, and 3) the orientation of the axes must be defined using available directional cues for all but one axis.Consider as an example superimposing 3D Cartesian coordinates over all points on the Earth. What units make sense? Kilometers are a good choice, since the original definition of the kilometer was geospatial—10 000 km equaling the surface distance from the Equator to the North Pole. Where to place the origin? Based on symmetry, the gravitational center of the Earth suggests a natural landmark. Finally, how to orient X-, Y- and Z-axis? The axis of Earth's spin provides a natural orientation strongly associated with "up vs. down", so positive Z can adopt the direction from geocenter to North Pole. A location on the Equator is needed to define the X-axis, and the prime meridian stands out as a reference orientation, so the X-axis takes the orientation from geocenter out to 0 degrees longitude, 0 degrees latitude. Note that with three dimensions, and two perpendicular axes orientations pinned down for X and Z, the Y-axis is determined by the first two choices. In order to obey the right-hand rule, the Y-axis must point out from the geocenter to 90 degrees longitude, 0 degrees latitude. So what are the geocentric coordinates of the Empire State Building in New York City? From a longitude of −73.985656 degrees, a latitude 40.748433 degrees, and Earth radius of 40,000/2π km, and transforming from spherical to Cartesian coordinates, you can estimate the geocentric coordinates of the Empire State Building, =. GPS navigation relies on such geocentric coordinates.

In engineering projects, agreement on the definition of coordinates is a crucial foundation. One cannot assume that coordinates come predefined for a novel application, so knowledge of how to erect a coordinate system where there is none is essential to applying René Descartes' thinking.

While spatial applications employ identical units along all axes, in business and scientific applications, each axis may have different units of measurement associated with it. Although four- and higher-dimensional spaces are difficult to visualize, the algebra of Cartesian coordinates can be extended relatively easily to four or more variables, so that certain calculations involving many variables can be done. Conversely, it is often helpful to use the geometry of Cartesian coordinates in two or three dimensions to visualize algebraic relationships between two or three of many non-spatial variables.

The graph of a function or relation is the set of all points satisfying that function or relation. For a function of one variable,

*f*, the set of all points, where is the graph of the function

*f*. For a function

*g*of two variables, the set of all points, where is the graph of the function

*g*. A sketch of the graph of such a function or relation would consist of all the salient parts of the function or relation which would include its relative extrema, its concavity and points of inflection, any points of discontinuity and its end behavior. All of these terms are more fully defined in calculus. Such graphs are useful in calculus to understand the nature and behavior of a function or relation.