Bitter Automotive
Erich Bitter Automobil GmbH is a premium sports-luxury automobile marque produced in Germany and later Austria. Founder Erich Bitter, a then retired racing driver turned automobile tuner, importer and ultimately designer began crafting his own vehicles after business ventures with Italian manufacturer Intermeccanica ended.
Bitter specialises in rebody-ing other manufacturer's vehicles and its initial production was between 1973 and 1989, selling vehicles in Europe and the United States. Thereafter, several prototypes followed with possible future low-volume production, but none arrived until the launch of the Bitter Vero in 2007.
CD
The Bitter CD, a three-door hatchback coupe featuring a Chevrolet V8 with a 327ci displacement, was built between 1973 and 1979.The CD was first shown in prototype form on 9 September 1969 at the Frankfurt Auto Show, as the Opel Coupé Diplomat derived from the sedan version. It was designed by Charles M. "Chuck" Jordan and Opel designer Dick Ruzzin, with the assistance of George A. Gallion, David Holls, Herbert Killmer and Hideo Kodama, as well as Erhard Schnell. The tail was inspired by an Erhard Schnell's proposal for the 1969 Opel Aero GT.
Thanks to the positive reaction to the CD prototype, Opel considered developing a production model. The doors would adopt a conventional opening system and the bumper bar, windshield wipers and other parts would be derived from the Opel Diplomat in order to facilitate production and maintain costs. Robert "Bob" Lutz, who was Opel's Head of Sales and Marketing at the time and was keen to produce the car, commissioned Pietro Frua to advance the concept and produce two road-going prototypes.
In 1971, it was David R. "Dave" Holls who encouraged Erich Bitter to build the Bitter CD. As a result, Bitter GmbH was formed in 1971 to market the CD. He chose to locate the company on a site in his home town of Schwelm, Germany.
However, because he did not have the necessary capital and other resources to set up his own production facilities, Bitter turned to Baur GmbH in Stuttgart, as a proven independent small-scale manufacturer. He selected them based on their ability to produce high-quality prototypes and limited-production cars for other German manufacturers.
Bitter based his original CD designs on those of Frua, before making alterations closer to production. The basic design changes to Frua's CD design vis-à-vis the 1969 Opel CD consisted of a truncated rear end, modified windshield and less chrome application. Dave Holls and Opel's design team supplemented the design with a small front spoiler, larger grille, higher bumper bars and by prolonging upwards the lower edge of the rear side windows across the C-pillar to the rear hatch. Final prototype testing was conducted at the Opel Test Facility in Dudenhofen, in addition to load duration tests by Bitter at the Hydropulseur facility of Baur.
The Baur team also engaged in significant development work, which included manufacturing a hard foam mockup. Their role then extended to manufacturing the CD body panels, assembling the shell, preparing interior as well as installing the Opel Diplomat's mechanicals.
The Bitter CD was displayed, with great success, at the 1973 Frankfurt Motor Show, where Erich Bitter took 176 orders for his stylish new coupe. However, the 1973 oil crisis led to the cancellation of most orders. Despite this, production commenced later that same year at Baur GmbH. The target of 200 units a year was never realised, and Bitter sold 395 units in total. The purchase price in 1974 was DM 58,400.
; Total production by year
SC
The first SC model to be launched was the coupé, which was first shown in 1979 although sales did not start until the spring of 1981. It was followed by the convertible, first presented in 1981 at the Frankfurt Auto Show and going on sale in the spring of 1983. The final version to arrive was the sedan, shown in 1984 and becoming available in 1985. Like the CD, the SC was based on Opel's largest model at the time, the Opel Senator. It remained in production until 1989.Exterior styling design echoed that of the Pininfarina-designed Ferrari 365 GT4 2+2 first shown in 1972, and later marketed as the 400 and 412. Bitter originally considered using a V8 engine; the 2.5-liter V8 from the Lamborghini Urraco and a Holden V8 both underwent benchtesting. However, emissions levels, fuel consumption, and high costs precluded their installation.
The SC was originally powered by a fuel-injected Opel 3.0-Litre in-line six-cylinder engine of. The power was acceptable but not quite sufficient for a car of its price class. Overheating concerns precluded fitting a turbocharger and instead Erich Bitter opted to add displacement. He had Opel-tuners Mantzel drastically increase the stroke, from, creating a 3848 cc version. Referred to as a 3.9-litre, this version appeared in 1984 and produces while also offering fifty percent more torque.
Bitter had hoped to maintain their relationship with Karosserie Baur, who had built the Bitter CD, but that company had meanwhile received a contract for building the BMW M1 and had no capacity to spare. Instead, Bitter went to a small, northern Italian coachbuilder called, near Turin. OCRA, however, did not have the means or experience to series produce bodies and lost the contract in early 1982, after 79 examples had been built. The bodywork on these early cars suffered from quality issues, in particular being very rust prone. Bitter then contracted with Maggiora to build the cars. As earlier, the painted bodies were sent to the Bitter factory in Schwelm where they underwent final assembly. As volumes picked up, however, assembly was handed off to Steyr-Puch in Graz, Austria in 1983.
Along with the introduction of the convertible in 1981, a four-wheel-drive version of the coupé was also added. The four-wheel-drive system was developed by Ferguson Research who also offered it for installation into the Opel Senator/Vauxhall Royale. Only a handful of these were built.
In 1984, Bitter announced at the New York Auto Show that it would enter into a limited marketing agreement with GM to sell the coupé version in the United States, through participating Buick dealerships. By being able to offer a premium European product, GM had hoped to regain market share lost to BMW at the time. The option of importing Opel cars was dismissed on the basis that it was perceived to be an entry-level brand, relative to BMW's premium status. Ultimately, fewer than a dozen Buick dealers would bear the Bitter signage, resulting in minimal sales. The American introduction of the car was handled by Bitter Automobile of America, which was headquartered in Chicago and co-headed by Erich Bitter and Chicago business mogul Lee Miglin. The failure was based on its business model - with costs increasing and car manufacture becoming ever more complex, the market for rebodying other manufacturers' vehicles had been diminishing for decades.
1984 model cars were made to meet federal emissions standards by an independent importer, but engine components were melting and the cars were not making advertised power. For 1985, Bitter received help from Porsche and the cars were fitted with an oxygen sensor and a catalytic converter from Porsche. The version cleaned by Porsche develops at 5100 rpm and at 2400 rpm.
; Total production by bodyshape
Vero
In 2007, Bitter resumed small-scale production by launching the Vero at the 2008 Geneva Motor Show. This car was derived from the Australian-made Holden Caprice sedan, believed to be purchased directly from Holden thanks to Erich Bitter's friendship with Holden's former chairman Peter Hanenberger.Relative to the donor car, the Vero features unique restyling claimed to have cost A$1 million, which took about a week to install. In particular, the vehicle is fitted with 20-inch alloy wheels and has an extended bonnet along with a redesigned front bumper incorporating a new grille, as well as a rear bumper insert to house rear foglights required in Europe. Its leather-trimmed interior featured luxury fittings from the donor car such as a DVD player and screens in the back of the front headrests for rear passengers. The donor car's Chevrolet V8 6.0-litre engine, with a six-speed automatic transmission, remained unchanged.
The Vero sold in Germany for €121,975 and was discontinued in 2012.