BMW M30


The BMW M30 is a SOHC straight-six petrol engine which was produced from 1968 to 1995. With a production run of 27 years, it is BMW's longest produced engine and was used in many car models.
The first models to use the M30 engine were the BMW 2500 and 2800 sedans and the 2800 CS coupe, which entered production in 1968. The initial M30 models were produced in displacements of and. Larger displacement versions were introduced over time, with the largest version being, which was sometimes badged as "3.5 litres". As per the BMW M10 four-cylinder engine from which the M30 was developed, the M30 has an iron block, an aluminium head and an overhead camshaft with two valves per cylinder.
The engine was given the nicknames of 'Big Six' and 'Senior Six', following the introduction of the smaller BMW M20 straight-six engine in the late 1970s. The M30 was produced alongside the M20 throughout the M20's production, and prior to the introduction of the BMW M70 V12 engine in 1987, the M30 was BMW's most powerful and largest regular production engine.
Following the introduction of the BMW M50 engine in 1990, the M30 began to be phased out.
Ward's have rated the M30 as one of the "Top Engines of the 20th Century".

Design

The M30 was originally developed in the late 1960s, loosely based on the BMW M10 four-cylinder engine first used in the BMW New Class sedans and coupes. Initially, the engine code was "M06" and the "M68", until all versions began to use the "M30" prefix in 1981.
Common features between the M10 and M30 include a profile lowering 30-degree slant to the right, a crossflow cylinder head, and chain-driven camshaft with rocker arm valve actuation. Further similarities include a cast-iron block with an aluminium head and a forged crankshaft. The first two M30 engines introduced were the and the versions, which both used an bore.

M30B35LE/M90 engine

The M30B35LE engine, also called the M90, was used in several models from 1979-1982. It combines the block from the motorsports BMW M88 DOHC engine with the M30's SOHC cylinder head.

Versions

M30B25V

The first version of the M30 was introduced in the 1968 E3 2500. This version uses dual Solex Zenith 35/40 INAT carburettors, has a compression ratio of 9.0:1 and produces in most applications. It has a bore of and a stroke of.
The M30B25 has previously been called the M06 and M68, prior to BMW retroactively renaming it the M30B25V.
Applications:
  • 1968–1977 E3 2500
  • 1974–1975 E9 2.5 CS
  • 1973–1976 E12 525 —, Solex 4A1 carburettor
  • 1976–1981 E12 525

    M30B25

In 1981, Bosch L-Jetronic electronic fuel injection was added to the version. Peak power remained unchanged at, however torque increased slightly to.
Applications:
  • 1981-1987 E28 525i
  • 1981-1986 E23 725i

    M30B28V

In its original form, the carburetted 2.8 used two Solex Zenith "35/40 INAT" carburetors, the compression ratio is 9.0:1 and the engine produces and. The specifications went on to vary depending on the model year, carburettor and country. The bore is and the stroke is.
This version has also been known as the M06 and M68, prior to BMW renaming it the M30B28V.
Applications:
  • 1968-1977 E3 2800 / 2.8L —
  • 1968-1971 E9 2800 CS —
  • 1971-1971 E3 Bavaria —, United States only
  • 1974-1976 E12 528 — dual Zenith INAT carburettors
  • 1976-1978 E12 528 —, Solex 4A1 carburettor
  • 1977-1979 E23 728 —, Solex 4A1 carburettor

    M30B28

In 1977, Bosch L-Jetronic electronic fuel injection was added to the version. Power increased to and torque increased to.
  • 1977-1978 E12 528i — North America only,, 9.0:1 compression ratio
  • 1978-1981 E12 528i —
  • 1979-1986 E23 728i
  • 1979-1987 E24 628CSi
  • 1981-1987 E28 528i

    M30B30V

Based on the M30B28V version with a larger bore, the M30B30V produces and, uses dual Zenith 35/40 INAT carburettors and has a compression ratio of 9.0:1. In United States trim, this engine produced at 5800 rpm.
Applications:
  • 1971-1975 E9 3.0 CS
  • 1971-1972 E9 3.0 CSL
  • 1971-1974 E3 3.0 S / 3.0 L / Bavaria
  • 1976-1979 E24 630 CS —, Pierburg 4A1 carburetor
  • 1977-1979 E23 730 —, Solex 4 A 1 carburettor

    M30B30

The fuel injected version of the M30 debuted in 1971 in the E9 3.0 CSi and initially used the Bosch D-Jetronic mechanical fuel injection system. In 1976, the fuel injection system was upgraded to Bosch L-Jetronic electronic fuel injection. The M30B30 produces up to and, depending on the model year and whether a catalytic converter is fitted. The compression ratio is 9.2:1. With catalytic converter, compression ratio is 9:1.
Applications:
  • 1971-1975 E9 3.0 CSi —
  • 1972-1973 E9 3.0 CSL —
  • 1972-1975 E3 3.0 Si —
  • 1975-1978 E12 530i — North America only,
  • 1976-1976 E12 530 MLE — South Africa only,
  • 1977-1978 E24 630CSi — North America only,
  • 1986-1995 E32 730i —
  • 1988-1990 E34 530i —

    M30B32

Despite having a capacity of, this engine appeared in many cars badged so as to suggest of displacement- such as the 633i, 3.3 Li, and 733i. The compression ratio is 8.8:1. In the E24 633CSi coupe, the M30B32 uses Bosch L-Jetronic electronic fuel injection. The US version used L-Jetronic from 1978 until mid-1981, changing over to Motronic digital fuel injection in June of that year. The 1979 732i is BMW's first use of Bosch's Motronic fuel injection. The bore is and the stroke is.
Applications:
  • 1973-1975 E9 3.0 CSL —,
  • 1976-1984 E24 633CSi — in Euro spec, in USA spec
  • 1976-1979 E3 3.3 Li —
  • 1977-1984 E23 733i — in Euro spec, in USA spec
  • 1979-1981 E12 533i — North America only,
  • 1979-1986 E23 732i —
  • 1982-1984 E28 533i — North America only,
  • 1984-1986 E30 333i — South Africa only,, special ALPINA Intake plenum and exhaust manifold, modified L-Jetronic Injection. Only 210 were produced for local Group 1 homologation.

    M30B33V

The carburetted M30B33 produces and. It has a bore of and a stroke of.
Applications:
  • 1973-1975 E3 3.3 L

    [|M30B34]

The M30B34 engines sold in Europe and most other markets used a 10.0:1 compression ratio and produced. In North America and Japan, the M30B34 used an 8.0:1 compression ratio and produced. This engine was also offered in Europe from the latter half of 1985 until mid-1987. In all markets, the Bosch Motronic digital fuel injection system was used. The bore is and the stroke is.
Applications:
  • 1982-1987 E23 735i / L7
  • 1982-1987 E24 635CSi / L6 — in Euro spec
  • 1985-1988 E28 535i / 535is / M535i

    M30B35

This engine has a capacity of, despite the "B35" model code. It produces at 5700 rpm and at 4000 rpm, has a compression ratio of 9.0:1 and uses Bosch Motronic 1.3 digital fuel injection. It was also offered without a catalytic converter for certain markets; this version produces and at the same engine speeds.
Applications:
  • 1988-1989 E24 635CSi
  • 1986-1992 E32 735i
  • 1987-1992 E34 535i
  • 1988-1989 Rayton Fissore Magnum 3.5

    Turbocharging

The M30 was the basis for the turbocharged M102 and M106 engines.
The Alpina B10 Biturbo used a modified version of the M30, with two turbochargers and forged pistons. Producing at 6000 rpm and at 4000 rpm, the engine made this car the fastest sedan in the world. The final 50 M30 blocks were shipped to Alpina for use in the final 50 B10 Biturbos.

M102

The M102 was produced from 1980 to 1982. It was BMW's first turbocharged six-cylinder engine.
The M102 has a displacement of. The KKK K27 turbocharger produces of boost and an air-to-air intercooler is used. The compression ratio is 7.0:1.
The M102 produces and was used in the E23 7 Series, in the model was designated "745i". The M102 was not available in right-hand drive cars, leading to the South African 745i using the BMW M88 naturally aspirated DOHC straight-six engine instead.
Applications:
  • 1980–1982 E23 745i

    M106

The M106 replaced the M102 and was produced from 1982 to 1986.
Some of the M106's upgrades over its predecessor are a result of the M30B34 version of the M30, which was also released in 1982. These upgrades include Bosch Motronic engine management and an increased displacement to. The compression ratio was increased from 7.0:1 to 8.0:1.
Peak power output is the same as the M102, however it occurs at lower RPM and peak boost is reduced from.
There was no direct successor to the M106, however BMW's next turbocharged petrol engine was the BMW N54, introduced in 2006.
Applications:
  • 1982–1986 E23 745i

    Motorsport

The M30 block powered a series of E9 CSL and E24 6 Series coupes to European Touring Car Championship throughout the 1970s and into the middle 1980s, as more powerful DOHC 24-valve heads had been developed for high-performance motorsports and street use. The BMW M49 and later BMW M88 high-performance engines are based on the M30 block.