Water issues in developing countries


Over one billion people in developing countries have inadequate access to clean water. Issues include scarcity of drinking water, poor infrastructure for water and sanitation access, water pollution, and low levels of water security. The main barriers to addressing water problems in developing nations include poverty, costs of infrastructure, and poor governance. The effects of climate change on the water cycle can make these problems worse.
The contamination of water remains a significant issue because of unsanitary social practices that pollute water sources. Almost 80% of disease in developing countries is caused by poor water quality and other water-related issues that cause deadly health conditions such as cholera, malaria, and diarrhea. It is estimated that diarrhea takes the lives of 1.5 million children every year, majority of which are under the age of five.
Access to freshwater is unevenly distributed across the globe, with more than two billion people live in countries with significant water stress. According to UN-Water, by 2025, 1.8 billion people will be living in areas across the globe with complete water scarcity. Populations in developing countries attempt to access potable water from a variety of sources, such as groundwater, aquifers, or surface waters, which can be easily contaminated. Freshwater access is also constrained by insufficient wastewater and sewage treatment. Progress has been made over recent decades to improve water access, but billions still live in conditions with very limited access to consistent and clean drinking water.

Problems

Water scarcity

People need fresh water for survival, personal care, agriculture, industry, and commerce. The 2019 UN World Water Development report noted that about four billion people, representing nearly two-thirds of the world population, experience severe water scarcity during at least one month of the year. With rising demand, the quality and supply of water have diminished.
Water use has been increasing worldwide by about 1% per year since the 1980s. Global water demand is expected to continue increasing at a similar rate until 2050, accounting for an increase of 20–30% above 2019 usage levels. The steady rise in use has principally been led by surging demand in developing countries and emerging economies. Per capita water use in the majority of these countries remains far below water use in developed countries—they are merely catching up.
Agriculture is by far the largest water consumer, accounting for 69% of annual water withdrawals globally. Agriculture's share of total water use is likely to fall in comparison with other sectors, but it will remain the largest user overall in terms of both withdrawal and consumption. Industry accounts for 19% and households for 12%.

Water pollution

After accounting for availability or access, water quality can reduce the amount of water for consumption, sanitation, agriculture, and industrial purposes. Acceptable water quality depends on its intended purpose: water that is unfit for human consumption could still be used in industrial or agriculture applications. Parts of the world are experiencing extensive deterioration of water quality, rendering the water unfit for agricultural or industrial use. For example, in China, 54% of the Hai River basin surface water is so polluted that it is considered un-usable.
Safe water is defined as potable water that will not harm the consumer. It is one of the eight Millennium Development Goals: between 1990 and 2015 to "reduce by half the proportion of the population without sustainable access to safe drinking water and basic sanitation." Even having access to an 'improved water source' does not guarantee the water's quality, as it could lack proper treatment and become contaminated during transport or home storage. A study by the World Health Organization found that estimates of safe water could be overestimated if accounting for water quality, especially if the water sources were poorly maintained.
Polluted drinking water can lead to debilitating or deadly water-borne diseases, such as fever, cholera, dysentery, diarrhea and others. UNICEF cites fecal contamination and high levels of naturally occurring arsenic and fluoride as two of the world's major water quality concerns. Approximately 71% of all illnesses in developing countries are caused by poor water and sanitation conditions. Worldwide, contaminated water leads to 4,000 diarrhea deaths a day in children under 5.
However, gaps in wastewater treatment represent the most significant contribution to water pollution and water quality deterioration. In the majority of the developing world, most of the collected wastewater is returned to surface waters directly without treatment, reducing the water's quality. In China, only 38% of China's urban wastewater is treated, and although 91% of China's industrial waste water is treated, it still releases extensive toxins into the water supply.
The amount of possible wastewater treatment can also be compromised by the networks required to bring the wastewater to the treatment plants. It is estimated that 15% of China's wastewater treatment facilities are not being used to capacity due to a limited pipe network to collect and transport wastewater. In São Paulo, Brazil, a lack of sanitation infrastructure results in the pollution of the majority of its water supply and forces the city to import over 50% of its water from outside watersheds. Polluted water increases a developing country's operating costs, as lower quality water is more expensive to treat. In Brazil, polluted water from the Guarapiranga Reservoir costs $0.43 per m3 to treat to usable quality, compared to only $0.10 per m3 for water coming from the Cantareira Mountains.

Water security

Managing water safety

To address water scarcity, organizations have focused on increasing the supply of fresh water, mitigating its demand, and enabling reuse and recycling.

Clean water plans

According to the WHO, consistent access to a safe drinking-water supply is attainable by establishing a system of WSPs, or Water Safety Plans, which determine the quality of water supply's to ensure they are safe for consumption. The Water Safety Plan Manual, published in 2009 by the WHO and the International Water Association, offers guidance to water utilities as they develop WSPs. This manual provides information to help water utilities assess their water system, develop monitoring systems and procedures, manage their plan, carry out periodic review of the WSP, and to review the WSP following an incident. The WSP manual also includes three case studies drawn from WSP initiatives in three countries/regions.

Alternative sources

Utilizing wastewater from one process to be used in another process where lower-quality water is acceptable is one way to reduce the amount of wastewater pollution and simultaneously increase water supplies. Recycling and reuse techniques can include the reuse and treatment of wastewater from industrial plant wastewater or treated service water for use in lower quality uses. Similarly, wastewater can be re-used in commercial buildings or for industrial applications.

Reducing water pollution

Despite the clear benefits of improving water sources, aid for water improvements have declined from 1998 to 2008 and generally is less than is needed to meet the MDG targets. In addition to increasing funding resources towards water quality, many development plans stress the importance of improving policy, market and governance structures to implement, monitor and enforce water quality improvements.
Reducing the amount of pollution emitted from both point and non-point sources represents a direct method to address the source of water quality challenges. Pollution reduction represents a more direct and low-cost method to improve water quality, compared to costly and extensive wastewater treatment improvements.
Various policy measures and infrastructure systems could help limit water pollution in developing countries. These include:
  1. Improved management, enforcement and regulation for pre-treatment of industrial and agricultural waste, including charges for pollution
  2. Policies to reduce agricultural run-off or subsidies to improve the quality and reduce the quantity needed of water polluting agricultural inputs
  3. Limiting water abstraction during critical low flow periods to limit the concentration of pollutants
  4. Strong and consistent political leadership on water
  5. Land planning

    Water treatment

Water treatment technologies can convert non-freshwater to freshwater by removing pollutants. Much of water's physical pollution includes organisms, metals, acids, sediment, chemicals, waste, and nutrients. Water can be treated and purified into freshwater with limited or no constituents through certain processes. The processes involved in removing the contaminants include physical processes such as settling and filtration, chemical processes such as disinfection and coagulation, and biological processes such as slow sand filtration.
A variety of innovations exist to effectively treat water at the point of use for human consumption. Studies have shown treatment to point of use sources reduces child mortality by diarrhea by 29%. Home water treatments are also a part of the United Nations' Millennium Development Goals, with the goal of providing both clean water supply and sewage connection in homes. Although these interventions have been evaluated by the United Nations, various challenges may reduce the effectiveness of home treatment solutions, such as low education, low-dedication to repair, replacement, and maintenance, or local repair services or parts are unavailable.
Current point of use and small scale treatment technologies include: