Unity (ISS module)


Unity, also known as Node 1, is the first U.S.-built component of the International Space Station. This cylindrical module, constructed of steel by Boeing for NASA, serves as the critical link between the orbiting laboratory's Russian Orbital Segment and US Orbital Segment.
Unity was launched on December 4, 1998, aboard the on STS-88. Two days later it was berthed to the previously launched Zarya module, marking the first connection between ISS components. Its six Common Berthing Mechanism locations facilitate connections to other modules. At launch, two CBM locations were fitted with Pressurized Mating Adapters, one of which enabled the mating with Zarya.
Measuring in diameter and in length, Unity was built at NASA's Marshall Space Flight Center. It is the first of three connecting modules, joined by Harmony and Tranquility.

Launch and initial berthing

Unity was carried into orbit as the primary cargo of the Space Shuttle Endeavour on STS-88, the first Space Shuttle mission dedicated to assembly of the station. On December 6, 1998, the STS-88 crew mated the docking port of the PMA on the aft berthing port of Unity with the forward hatch of the already orbiting Zarya module.

Connecting modules and visiting vehicles

Unity has two axial and four radial Common Berthing Mechanism ports. In addition to connecting to the Zarya module, Unity connects to the U.S. Destiny Laboratory Module, the Z1 truss, the PMA-3, and the Quest Joint Airlock. During STS-120 the Harmony module was temporarily berthed to the port-side hatch of Unity. Tranquility, with its multi-windowed cupola, was attached to Unity's port side during the STS-130 mission, and Leonardo was added to the nadir hatch during STS-133.
In addition, the Leonardo and Raffaello Multi-Purpose Logistics Modules were each berthed to Unity on multiple missions.
;Forward
;Aft
  • PMA-1, launch–''present
  • * Zarya, December 6, 1998–present
;Port
  • PMA-3, March 2001–August 30, 2007
  • Harmony, October 26–November 12, 2007
  • PMA-3, August 7, 2009–January 25, 2010
  • Tranquility, February 12, 2010–present
;Starboard
  • Quest, July 15, 2001–present
;Zenith
;Nadir
Essential space station resources such as fluids, environmental control and life support systems, electrical and data systems are routed through Unity to supply work and living areas of the station. More than 50,000 mechanical items, 216 lines to carry fluids and gases, and 121 internal and external electrical cables using six miles of wire were installed in the Unity node. The primary structure of Unity is constructed of aluminium.
During the space station construction, a crew member placed two speed limit signs on the hatch in 2003, noting the orbital velocity in mph and km/h.
Prior to its launch aboard Endeavour, conical Pressurized Mating Adapters were attached to the aft and forward berthing mechanisms of Unity. Unity and the two mating adapters together weighed about. The adapters allow the docking systems used by the Space Shuttle and by Russian modules to attach to the node's hatches and berthing mechanisms. PMA-1 now permanently attaches Unity to Zarya, while PMA-2 provided a Shuttle docking port. Attached to the exterior of PMA-1 are computers, or multiplexer-demultiplexers, which provided early command and control of Unity. Unity also is outfitted with an early communications system that allows data, voice and low data rate video with Mission Control Houston, to supplement Russian communications systems during the early station assembly activities. PMA-3 was attached to Unitys nadir berthing mechanism by the crew of STS-92.

Other nodes

The two remaining station connecting modules, or nodes, were manufactured in Italy by Alenia Aerospazio, as part of an agreement between NASA and the European Space Agency. Harmony and Tranquility are slightly longer than Unity, measuring almost long in total. In addition to their six berthing ports, each can hold eight International Standard Payload Racks. Unity, in comparison, holds just four ISPRs. ESA built Nodes 2 and 3 as partial payment for the launch aboard the Shuttle of the Columbus laboratory module, and other ESA equipment.