Shipman 28
The Shipman 28, also sold as the Baltic 28, is a Swedish sailboat that was designed by Olle Enderlein as a cruiser and first built in 1969.
Production
The design was built by Shipman Sweden AB, Visby and Albin Marine, all in Sweden and Fiberman Composite Racing Products in the Republic of Ireland. About 1,000 boats were completed between 1969 and 1979, but it is now out of production.The boat was also built by Baltic Marine and sold as the Baltic 28.
Design
The Shipman 28 is a recreational keelboat, built predominantly of fibreglass. It has a masthead sloop rig with aluminum spars, a deck-stepped mast, wire standing rigging and a single set of unswept spreaders. The hull has a spooned raked stem; a raised counter, reverse transom; a skeg-mounted rudder controlled by a tiller and a fixed fin keel. It displaces and carries of ballast.The boat has a draft of with the standard keel and is fitted with a Faryman a40 diesel engine of with hydraulic transmission for docking and manoeuvring.
The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin, a straight settee in the main cabin and an aft cabin with a single berth on the starboard side. The galley is located on the port side at the companionway ladder. The galley is equipped with a two-burner stove and a single stainless steel sink. A dinette table is opposite the galley, on the starboard side. The head is located just aft of the bow cabin on the starboard side.
The maximum below-decks headroom is in the main cabin. The saloon has of headroom and the aft cabin.
For sailing downwind the design may be equipped with a symmetrical spinnaker of. It has a hull speed of.
Operational history
The boat is supported by an active class club based in Denmark, that organizes racing events, the Shipman 28 Klubben.Matt Rutherford sailed an Albin Vega on the first solo non-stop circumnavigation of the Americas.