STANAG magazine


A STANAG magazine or NATO magazine is a type of detachable firearm magazine proposed by NATO in October 1980. Shortly after NATO's acceptance of the 5.56×45mm NATO rifle cartridge, Draft Standardization Agreement 4179 was proposed in order to allow NATO members to easily share rifle ammunition and magazines down to the individual soldier level. The U.S. M16 rifle's magazine proportions were proposed for standardization. Many NATO members, but not all, subsequently developed or purchased rifles with the ability to accept this type of magazine. However, the standard was never ratified and remains a "Draft STANAG".

Magazines

The STANAG magazine concept is only an interface, dimensional and controls requirement. Therefore, it not only allows one type of magazine to interface with various weapon systems, but also allows STANAG magazines to be made in various configurations and capacities. The standard capacities of STANAG-compatible magazines are 20 or 30 rounds of 5.56×45mm NATO ammunition. There are also 5-, 10-, 40- and 50-round box magazines, as well as 60- and 100-round casket magazines, 90-round snail-drum magazines, and 100-round drum magazines.

Issues and improvements

The STANAG magazine, while relatively compact compared to other types of 5.56×45mm NATO box magazines, has often been criticized for a perceived lack of durability and a tendency to malfunction unless treated with a level of care that may not be practical under combat conditions. Because STANAG 4179 is only a dimensional standard, production quality from manufacturer to manufacturer is not uniform.
As a result, in March 2009, the U.S. military began to accept delivery of improved STANAG magazines.
ARDEC began development of a new magazine design in July 2013 to address feeding issues of older designs with the new M855A1 Enhanced Performance Round. It was first made public in 2014 and completed development in mid-2016 as the Enhanced Performance Magazine. The magazine uses a blue follower and a tan body which presents the rounds with a better angle to the weapon's feedway, preventing the hardened steel tip of the EPR from contacting the aluminum feed ramp of the M4 carbine, increasing mean rounds between stoppage by 300%.

Firearms compatible with STANAG magazines

AR-15/M16 type rifles

Non-AR-15/M16 type rifles

Manually operated rifles

STANAG magazine convertible rifles

Other cartridges

Over the years different cartridges that fit into the STANAG magazine emerged, some rounds like .300 AAC Blackout have the same rim diameter as .223 Remington and only require a barrel change to be used in a firearms that was previously using in .223 Remington. Some large caliber cartridges require replacing the magazine follower for single-stack loading, while very large cartridges such as the 50 Beowulf also requires minor modifications to the front of the magazine to ensure proper feeding.
CartridgeRequires modification to the magazineCapacity in 30 round magazineRim diameter
.223 Remingtonno30
.300 AAC Blackoutno30
6×45mmno30
.450 BushmasterSingle stack follower9
.458 SOCOMSingle stack follower10
.50 BeowulfYes10

Loading tools

Loading a STANAG magazine, particularly one with a large capacity and a corresponding high spring pressure pushing the rounds to the top of the magazine, can be quite difficult. A number of devices are available to make this task simpler. These are sometimes called speedloaders but are more commonly known as magazine loaders, stripper clips, spoons, or stripper clip guides. There are a wide range of both commercial and military type loading tools available for STANAG magazines. For example; draft STANAG 4181 is a type of stripper clip and guide tool proposed for standardization based on the USGI M16 rifle stripper clips and guide tools.