Shooting range
A shooting range, firing range, gun range or shooting ground is a specialized facility, venue, or field designed specifically for firearm usage qualifications, training, practice, or competitions. Some shooting ranges are operated by military or law enforcement agencies, though the majority of ranges are privately owned by civilians and sporting clubs and cater mostly to recreational shooters. Each facility is typically overseen by one or more supervisory personnel, known as a Range Officer, or sometimes a range master in the United States. Supervisory personnel are responsible for ensuring that all safety rules and relevant laws are followed at all times.
Shooting ranges can be indoor or outdoor, and may be restricted to certain types of firearm that can be used such as handguns or long guns, or they can specialize in certain Olympic disciplines such as trap/skeet shooting or 10 m air pistol/rifle. Most indoor ranges restrict the use of high-power calibers, rifles, or fully automatic firearms.
A shooting gallery is a recreational shooting facility with toy guns, often located within amusement parks, arcades, carnivals or fairgrounds, to provide safe casual games and entertainment for the visiting crowd by prizing customers with various dolls, toys and souvenirs as trophies.
Type
In urban areas, most shooting ranges will be at indoor facilities. Indoor ranges offer sheltering from inclement weather conditions and can be operated around the clock under a controlled environment. Outdoor shooting ranges are typically found away from populated areas due to concerns of safety, noise pollution and soil contamination.Indoor range
Indoor shooting ranges are usually constructed as standalone structures, though they may be housed in larger buildings in isolated areas such as the basement. The basic components of most indoor ranges consist of firing lines/lanes, targets and a bullet trap/"backstop". Design considerations may vary depending on planned use but they all must address the basic requirements for operating the range safely, and that is provide ballistic protection, safety controls, proper ventilation, acoustic isolation and appropriate lighting.Structural components
Firing range walls are usually constructed of poured concrete, precast concrete or masonry blocks. The walls must be sufficiently impenetrable and provide adequate ballistic protection from stray shots and back-splatter. Floors are constructed from dense reinforced concrete with a smooth surface finish and are usually slanted slightly from up range toward the backstops downrange to allow for better maintenance and cleaning.Indoor range roofs are constructed from steel joists or precast concrete panels with a smooth flat surface that will redirect misfired bullets, facilitate maintenance, and prevent lead buildup. Roof baffles are installed at a 25–30 degree angle to protect ceilings, lighting fixtures, ventilation ducts, and any other unprotected element from stray bullets. Baffles are typically constructed of armored plate steel covered with fire-rated plywood. Deflectors are similar to baffles, but are not usually covered with plywood; they can be installed either vertically or horizontally and are used to redirect stray bullets from unprotected fixtures and elements inside the firing range such as doors, windows, and ventilation registers. Shields are constructed of plate steel and plywood.
The central controls for the firing range equipment, communication, lighting, and security are housed in control rooms or stations. The range master, who is in charge of range operation and management, operates the controls. The control station must provide the range master with an unobstructed line of sight of the firing lanes and all shooters. Control stations are usually constructed of concrete blocks with bulletproof observation windows.
Backstops and bullet traps are used to absorb the energy from the projectile and capture it to prevent overflight beyond the range area. Bullet traps come in a variety of designs and are usually constructed of impenetrable metal plates. The thickness of the plates and the materials used depend on the velocity and energy levels of the projectiles to be fired in the range. The majority of modern bullet traps are made up of angled hardened steel plates that redirect bullets into other metal plates, releasing their energy. The plates must be resistant to penetration, abrasion, and metal fatigue. The traps direct the spent bullets to a collection area in front of the trap or, for high-energy projectiles, at the back of the trap.
Many indoor ranges provide additional spaces such as a cleaning room for weapons, a classroom, restrooms, office areas, lounge area, or storage and maintenance rooms. Passageways are used to physically isolate the firing range from the adjoining areas.
Physical components
Some shooting ranges are equipped with shooting booths to provide shooters with a defined private area and to reduce potential hazard from misfires and prevent ejected cartridge cases from hitting/distracting adjacent shooters. Shooting booths are made of partitions or panels which can be acoustically treated to reduce the unpleasant effects of noise on surrounding bystanders. The booths are sometimes equipped with communication or target-operation equipment; target or booth lighting controls; shelves for holding weapons and bullets, or to prevent shooters from going downrange; and equipment for practicing shooting from behind a barrier. The firing line, usually marked red or orange, runs along the downrange edge of the shooting booths. Some ranges have motion detectors that can set off an alarm when a shooter passes this line during shooting.Target systems consist of a target object and optionally a target carrier system and a target control system. Some ranges utilise electronic scoring systems which do not require paper targets to be placed downrange. Targets for indoor ranges are usually a paper sheet or piece of corrugated cardboard with a printed image, either a bullseye or a silhouette.
Target carrier systems allow a range to operate more efficiently and safely by transporting targets between the firing line and the target line, so the shooter does not have to wait for a "ceasefire" and physically walk downrange to examine and set up the target. This is particularly useful on commercial and "self service" ranges. The target control system allows the range master to control the operation and movement of the targets through a central control station in the control booth. Some ranges provide local control modules that can be operated in the shooting booths. Many smaller clubs or competition ranges may not bother with target carriers as shooters fire in timed details anyway, and match targets will be collected for scoring at the end of each detail. Electronic scoring systems are increasingly common on such ranges, which eliminate paper targets and manual scoring.
Operational components
A critical component in the design and proper operation of an indoor ranges is the ventilation system. Proper ventilation reduces shooters' exposure to airborne lead particles and other combustion byproducts. Ventilation systems consist of supply and exhaust air systems and associated ductwork. Supply air can be provided through a perforated wall plenum or radial air diffusers mounted at ceiling height. Airflow along the firing line should be no more than 0.38 m/s with a minimum acceptable flow of 0.25 m/s. Air is typically exhausted at or behind the bullet trap. Some firing ranges are designed to have multiple exhaust points downrange to maintain downrange flow and desired velocities at the firing line. The exhaust system should be designed to provide minimum duct air velocities of 12.70 – 15.24 m/s. The equipment and designs for the ventilation systems are varied, most firing ranges have one supply and one exhaust fan, however, some have multiple supply or exhaust fans. Very often, the air-flow rate required by the firing range and space constraints for the fans dictate the number and types of fans. Most firing ranges have systems that supply 100% outside air to the firing range and exhaust all of the air to outside the building; but, some firing range ventilation systems are designed to recirculate some of the exhaust air to the supply air system to conserve energy especially in extreme climates. The exhaust air is always filtered before being exhausted outside the building or recirculated to the supply system.Lighting in the range consists of control booth, uprange area, shooting booth, and downrange lighting systems. Control booth lighting is usually manually controlled and consists of general lighting and low-level lighting used during particular shooting conditions. Lighting uprange of the booths is general ceiling-level lighting and can usually be controlled manually or from the central controls. Lights downrange of the firing line are usually spotlights used to illuminate the targets at various distances downrange of the booths.
Safety control systems are installed to protect the shooters during range malfunction or emergency situations. Such systems may include warning lights, alarm bells, and air-flow and filtration monitors.
Airgun ranges
Due to the lower power of most airguns, it is often possible to operate airgun ranges safely in multi-use and improvised spaces. This is particularly true of ISSF-oriented airguns which are limited to muzzle energies of 6ft-lb.Suitable ranges can be set up in sports halls or function rooms, using simple wooden backers, pellet catchers or lightweight ballistic curtains to protect the wall behind. Although safe handling practices for lead pellets must be followed, the lack of combustion gases negates the need for the high-performance ventilation systems required on conventional indoor ranges. Such arrangements are particularly common for major championships. Few locations could justify the expense of maintaining a permanent range with 80+ firing lanes, but such a range can be set up temporarily in large sports halls or exhibition centres. This is the approach taken by major European events such as InterShoot, RIAC and the Welsh Airgun Championships.