Fluorocarbon


Fluorocarbons are chemical compounds with carbon-fluorine bonds. Compounds that contain many C-F bonds often have distinctive properties, e.g., enhanced stability, volatility, and hydrophobicity. Several fluorocarbons and their derivatives are commercial polymers, refrigerants, drugs, and anesthetics.

Nomenclature

Perfluorocarbons or PFCs, are organofluorine compounds with the formula CxFy, meaning they contain only carbon and fluorine. The terminology is not strictly followed and many fluorine-containing organic compounds are also called fluorocarbons. Compounds with the prefix perfluoro- are hydrocarbons, including those with heteroatoms, wherein all C-H bonds have been replaced by C-F bonds. Fluorocarbons includes perfluoroalkanes, fluoroalkenes, fluoroalkynes, and perfluoroaromatic compounds.

Perfluoroalkanes

Chemical properties

Perfluoroalkanes are very stable because of the strength of the carbon–fluorine bond, one of the strongest in organic chemistry.
Its strength is a result of the electronegativity of fluorine imparting partial ionic character through partial charges on the carbon and fluorine atoms, which shorten and strengthen the bond through favorable covalent interactions. Additionally, multiple carbon–fluorine bonds increase the strength and stability of other nearby carbon–fluorine bonds on the same geminal carbon, as the carbon has a higher positive partial charge. Furthermore, multiple carbon–fluorine bonds also strengthen the "skeletal" carbon–carbon bonds from the inductive effect. Therefore, saturated fluorocarbons are more chemically and thermally stable than their corresponding hydrocarbon counterparts, and indeed any other organic compound. They are susceptible to attack by very strong reductants, e.g. Birch reduction and very specialized organometallic complexes.
Fluorocarbons are colorless and have high density, up to over twice that of water. They are not miscible with most organic solvents, but are miscible with some hydrocarbons. They have very low solubility in water, and water has a very low solubility in them. They have low refractive indices.
As the high electronegativity of fluorine reduces the polarizability of the atom, fluorocarbons are only weakly susceptible to the fleeting dipoles that form the basis of the London dispersion force. As a result, fluorocarbons have low intermolecular attractive forces and are lipophobic in addition to being hydrophobic and non-polar. Reflecting the weak intermolecular forces these compounds exhibit low viscosities when compared to liquids of similar boiling points, low surface tension and low heats of vaporization. The low attractive forces in fluorocarbon liquids make them compressible and able to dissolve gas relatively well. Smaller fluorocarbons are extremely volatile. There are five perfluoroalkane gases: tetrafluoromethane, hexafluoroethane, octafluoropropane, perfluoro-n-butane and perfluoro-iso-butane. Nearly all other fluoroalkanes are liquids; the most notable exception is perfluorocyclohexane, which sublimes at 51 °C. Fluorocarbons also have low surface energies and high dielectric strengths.

Flammability

In the 1960s there was a lot of interest in fluorocarbons as anesthetics. The research did not produce any anesthetics, but the research included tests on the issue of flammability, and showed that the tested fluorocarbons were not flammable in air in any proportion, though most of the tests were in pure oxygen or pure nitrous oxide.
CompoundTest conditionsResult
HexafluoroethaneLower flammability limit in oxygen-
PerfluoropentaneFlash point in air-
PerfluoropentaneFlash point in oxygen−6 °C
PerfluoropentaneFlash point nitrous oxide−32 °C
PerfluoromethylcyclohexaneLower flammability limit in air-
PerfluoromethylcyclohexaneLower flammability limit in oxygen8.3%
PerfluoromethylcyclohexaneLower flammability limit in oxygen 7.4%
PerfluoromethylcyclohexaneLower flammability limit in nitrous oxide7.7%
Perfluoro-1,3-dimethylcyclohexaneLower flammability limit in oxygen 5.2%
PerfluoromethyldecalinSpontaneous ignition test
in oxygen at 127 bar		No ignition at 500 °C
PerfluoromethyldecalinSpontaneous ignition in adiabatic shock
wave in oxygen, 0.98 to 186 bar		No ignition
PerfluoromethyldecalinSpontaneous ignition in adiabatic shock
wave in oxygen, 0.98 to 196 bar		Ignition

In 1993, 3M considered fluorocarbons as fire extinguishants to replace CFCs. This extinguishing effect has been attributed to their high heat capacity, which takes heat away from the fire. It has been suggested that an atmosphere containing a significant percentage of perfluorocarbons on a space station or similar would prevent fires altogether.
When combustion does occur, toxic fumes result, including carbonyl fluoride, carbon monoxide, and hydrogen fluoride.

Gas dissolving properties

Perfluorocarbons dissolve relatively high volumes of gases. The high solubility of gases is attributed to the weak intermolecular interactions in these fluorocarbon fluids.
The table shows values for the mole fraction,, of nitrogen dissolved, calculated from the Blood–gas partition coefficient, at 298.15 K, 0.101325 MPa.
Liquid10Concentration
Water0.1180.65
Ethanol3.576.12
Tetrahydrofuran5.216.42
Acetone5.427.32
Cyclohexane7.737.16
Perfluoro-1,3-dimethylcyclohexane31.914.6
Perfluoromethylcyclohexane33.116.9

Manufacture

The development of the fluorocarbon industry coincided with World War II. Prior to that, fluorocarbons were prepared by reaction of fluorine with the hydrocarbon, i.e., direct fluorination. Because C-C bonds are readily cleaved by fluorine, direct fluorination mainly affords smaller perfluorocarbons, such as tetrafluoromethane, hexafluoroethane, and octafluoropropane.

Fowler process

A major breakthrough that allowed the large scale manufacture of fluorocarbons was the Fowler process. In this process, cobalt trifluoride is used as the source of fluorine. Illustrative is the synthesis of perfluorohexane:
The resulting cobalt difluoride is then regenerated, sometimes in a separate reactor:
Industrially, both steps are combined, for example in the manufacture of the Flutec range of fluorocarbons by F2 chemicals Ltd, using a vertical stirred bed reactor, with hydrocarbon introduced at the bottom, and fluorine introduced halfway up the reactor. The fluorocarbon vapor is recovered from the top.

Electrochemical fluorination

involves electrolysis of a substrate dissolved in hydrogen fluoride. As fluorine is itself manufactured by the electrolysis of hydrogen fluoride, ECF is a rather more direct route to fluorocarbons. The process proceeds at low voltage so that free fluorine is not liberated. The choice of substrate is restricted as ideally it should be soluble in hydrogen fluoride. Ethers and tertiary amines are typically employed. To make perfluorohexane, trihexylamine is used, for example:
The perfluorinated amine will also be produced:

Environmental and health concerns

Fluoroalkanes are generally inert and non-toxic.
Fluoroalkanes are not ozone depleting, as they contain no chlorine or bromine atoms, and they are sometimes used as replacements for ozone-depleting chemicals.
The term fluorocarbon is used rather loosely to include any chemical containing fluorine and carbon, including chlorofluorocarbons, which are ozone depleting.
Perfluoroalkanes used in medical procedures are rapidly excreted from the body, primarily via expiration with the rate of excretion as a function of the vapour pressure; the half-life for octafluoropropane is less than 2 minutes, compared to about a week for perfluorodecalin.
Image:Halogenated gas concentrations 1978-present.png|thumb|right|upright=2.2|Atmospheric concentration of PFC-14 and PFC-116 compared to similar man-made halogenated gases between years 1978 and 2015. Note the logarithmic scale.
Low-boiling perfluoroalkanes are potent greenhouse gases, in part due to their very long atmospheric lifetime, and their use is covered by the Kyoto Protocol. The global warming potential of many gases can be found in the IPCC 5th assessment report, with an extract below for a few perfluoroalkanes.
NameChemical formulaLifetime GWP
PFC-14500006630
PFC-1161000011100
PFC-c21630009200
PFC-21826008900
PFC-31832009540

The aluminium smelting industry has been a major source of atmospheric perfluorocarbons, produced as by-product of the electrolysis process. However, the industry has been actively involved in reducing emissions in recent years.

Applications

As they are inert, perfluoroalkanes have essentially no chemical uses, but their physical properties have led to their use in many diverse applications. These include:
As well as several medical uses:
  • Contrast-enhanced ultrasound
  • Oxygen Therapeutics
  • Blood substitute
  • Liquid breathing
  • Eye surgery
  • Tattoo removal