Interstate 74 in North Carolina


Interstate 74 is a partially completed part of the Interstate Highway System that is planned to run from Davenport, Iowa, to Myrtle Beach, South Carolina. In the US state of North Carolina, I-74 currently exists in three distinct segments; from I-77 at the Virginia state line to US Highway 52 near Mount Airy, from I-40 in Winston-Salem to US 220 near Ellerbe, and from US 74 and US 74 Business near Maxton to US 74/North Carolina Highway 41 near Lumberton. I-74 has an extensive concurrency with I-73 from Randleman to Ellerbe in the Piedmont. When completed, I-74 will link the cities of Mount Airy, Winston-Salem, High Point, Rockingham, Laurinburg, and Lumberton.
The 1991 Intermodal Surface Transportation Efficiency Act authorized a new high priority transportation corridor from Michigan to Myrtle Beach, originally to be I-73. Conflicts over the routing of I-73 led to a compromise in 1995 that created a proposed extension of I-74 from Cincinnati, Ohio, to Myrtle Beach. The first section of I-74 was completed on August 27, 1996, between Steeds and Ulah. I-74 replaced North Carolina Highway 752 in 1998 near Mount Airy, and the entirety of the Mount Airy segment was completed by 2000. A segment of the Interstate was opened in 2008 between Maxton and Lumberton, creating the third segment of I-74 in North Carolina. In 2012, I-74 was extended from Ellerbe to Winston-Salem along US 311. The Piedmont segment was extended south in June 2013 and June 2018 in concurrency with I-73 and US 220 to Randleman.

Route description

, there are a total of of I-74, broken in three segments across the state: the Mount Airy, Piedmont Triad, and Laurinburg areas.

Mount Airy

The first section of I-74 begins at the Virginia state line. After separation, it goes east and connects to US 52 near Mount Airy, where the first section ends.
I-74 is to be routed along US 52 from Mount Airy to Rural Hall, where it will then separate onto the new Winston-Salem Northern Beltway and go east around Winston-Salem before connecting to existing I-74 south of Kernersville. Under a new accelerated construction plan for the Beltway, right-of-way acquisition began in 2012 and construction started in December 2014. Until construction is completed, travelers wanting to connect between the first and second section of I-74 should stay on US 52 through downtown Winston-Salem and then take I-40 east to I-74 east toward High Point.
File:Future73nbfuture74wb.JPG|thumb|left| I-73/I-74/US 220, near Asheboro

Piedmont Triad

The second section of I-74 extends from the intersection with I-40 in southeastern Winston-Salem to High Point. Until January 2019, this section of I-74 was concurrent with US 311. This section was designated despite not having shoulders, with the promise that shoulders would be widened later. Signs were installed by August 2014. This section connects directly to another section, called the High Point East Belt. It connects High Point with both I-85 Bus. and I-85. Construction completed on June 7, 2013, extended the freeway an additional to US 220/I-73 at milemarker 86 in Randleman. The highway was originally to be completed by October 2012.
I-74 joins with I-73/US 220 south in Randleman going south to Asheboro. The freeway is already completed but was not allowed to be signed as a full Interstate until the segment through Asheboro was converted to Interstate Highway standards in December 2013. The fourth section of I-74 starts along a bypass of Asheboro where a project to convert US 220 to Interstate standards was completed, and Interstate signs went up in 2012.
I-74 continues concurrently with I-73 and US 220 between I-73 milemarkers 68 and 42, the first section marked as I-74 in North Carolina in 1997. It continues south, bypassing the towns of Seagrove, Biscoe, and Candor. Visitor centers are located eastbound and westbound at milemarker 61. After exit 41, US 220 leaves the freeway and the route continues as I-73/I-74 for another toward Rockingham. Though this part of I-73/I-74 was completed in 2008 and is up to Interstate standards, it was initially signed as a future Interstate route because it had not been accepted into the Interstate Highway System by the Federal Highway Administration by the time it was opened, necessitating the posting of future shields. This situation was remedied on July 7, 2011, when the FHWA approved the addition of this segment to the Interstate Highway System. The route was finally signed as I-73 and I-74 in late 2013.
In late 2018, this segment was extended by, from US 220/Haywood Cemetery Road to a partially completed trumpet interchange on US 220 north of Rockingham. A bypass around Rockingham that connected to the US 74 bypass south of the town opened in late-January 2025.

Sandhills

The Western Rockingham Bypass, from the US 74/US 74 Bus. interchange to US 220, near Ellerbe, has all right-of-way purchases completed along the proposed route. Construction on a section, along US 220, began in March 2014; with a contracted amount of $49.8 million, it was completed in April 2018. The remaining sections of the new bypass were scheduled to start construction by late 2017; however, under reprioritization of construction projects announced in 2014, they were first removed from the list of projects to be started through 2024 then had funding restored with a construction date of 2022 in mid-2016. In January 2017, however, the project, though still funded, was delayed four years due to a low score in prioritizing projects for the 2018–2027 NCDOT State Transportation Improvement Program. On January 9, 2019, it was announced that the North Carolina State Transportation Improvement Program for 2020 to 2029 included connecting I-73 with US 74 six years sooner than planned. A $146.1-million contract was awarded for the of four-lane freeway with "substantial completion" by late 2023. The bypass was completed and opened to traffic on January 28, 2025.
Future I-73 ends near the NC 38 exit where it is planned to be routed south into South Carolina. I-74 continues to the end of the freeway. Between Hamlet and Laurinburg is an at-grade expressway that will eventually be converted to Interstate standards. At Laurinburg, I-74 is to use the Laurinburg Bypass that was at the standard North Carolina freeway grade and signed as I-74 in 2008; however, the North Carolina Department of Transportation had to remove the signage the following year when the FHWA ruled against using them until the freeway was up to Interstate standards.
The third section of I-74 is officially named the American Indian Highway; completed in 2008, this section stretches from Maxton to south of Lumberton, connecting with I-95/US 301. After NC 41, I-74 ends for the final time as the highway continues on as an at-grade expressway signed as US 74/Future I-74 Corridor.

East of I-95

Future I-74 is to continue to follow US 74, going through the city of Whiteville and bypassing the town of Lake Waccamaw. While there are no funded projects to convert the entire highway to Interstate standards, NCDOT is funding several smaller projects to replace intersections with interchanges for several of the remaining cross streets, including for NC 72/NC 130 north of Boardman and replacing other intersections with grade separations, such as with Old US 74 near Evergreen. An interchange at Boardman Road began construction on May 25, 2021, and opened in September 2023. Two intersections at NC 72 and at NC 130 are planned to be converted into a single interchange and that project is scheduled to begin February 2023. A third and fourth project, now combined, will build an interchange at Chauncey Town Road and an overpass at Old Lake Road. Those projects were contracted on June 21, 2022, for an estimated cost of $44 million. This would almost build a completed freeway to the NC 211 interchange in Bolton with one exception: the at-grade intersection at US 74/Creek Road will be converted to an overpass in 2025 according to the NCDOT 2020–2029 STIP.
Before the town of Bolton, I-74 will separate from US 74 onto a proposed new freeway that will head southward, toward Shallotte, then go west on the proposed extension of South Carolina Highway 31 into South Carolina. This entire section of I-74 is still under a feasibility study with several possible routing options; it thus may take years before reaching South Carolina.

Alternate names

Though the highway is commonly known as I-74 throughout the state, the highway does have other known names it uses locally in areas.
  • American Indian Highway—official name of the section of I-74 in Robeson County. It is named to honor the large American Indian population in Robeson County.
  • Blue Star Memorial Highway—unofficial North Carolina honorary name of I-74 in Randolph County.
  • High Point East Belt—road name in Guilford County.

    History

initially authorized the new high priority transportation corridor 5, tentatively known as I-73, to travel from Michigan to South Carolina. Because of several disputes to the routing, a compromise was reached in 1995, by Senator John Warner and Senator Lauch Faircloth, that extended I-74 from its then current eastern terminus of Cincinnati to overlap I-73. In Virginia, I-74 would follow I-77 into North Carolina, while I-73 would go east to Roanoke then south along US 220 toward Greensboro. However, when I-73 crossed a border between two states, the federal law authorizing the road required that the two states agree that their sections meet. Originally, both Carolinas selected a route running south from Rockingham. North Carolina had more money to spend on roads, though, and, on May 10, 1995, the US Senate Committee on Environment and Public Works approved North Carolina's plan for I-73 to run eastward to the coast and enter South Carolina at North Myrtle Beach, South Carolina. Another compromise, between Faircloth and Senator Strom Thurmond, agreed to have both Interstates enter South Carolina: I-73 south of Rockingham and I-74 south of Wilmington, North Carolina. After later amendments and the 1998 Transportation Equity Act for the 21st Century, on July 25, 1998, the American Association of State Highway and Transportation Officials accepted I-73/I-74 into the Interstate Highway System within the states of South Carolina, North Carolina, and Virginia.
The portion from south of Steeds north to south of Ulah was completed August 27, 1996, and was the first road marked as I-74. Future signage was also installed north to the Greensboro area. The remainder of the of existing and new freeway between Ulah and Candor was also signed as I-73/I-74 along US 220. In 1998, NC 752, a freeway spur of I-77 was renumbered as the segment of completed I-74, from I-77 to US 601. On June 30, 1999, the freeway was extended an additional to US 52, south of Mount Airy. In April 2001, I-74 was overlapped with I-77 from the Virginia state line to exit 101.
In January 2008, a section of freeway was completed from Candor to Ellerbe; however, it was signed Future I-73/I-74. On November 22, 2010, a section was added between North Main Street in High Point to Cedar Square Road near Glenola. This also includes the section of new freeway that opened between I-85 Business Cedar Square Road. On October 4, 2012, I-74 was extended west from High Point to I-40, in Winston-Salem.
On June 7, 2013, I-74 extended east onto new primary routing from Cedar Square Road to I-73/US 220, near Randleman. Continuing in concurrency with I-73/US 220, it now connects two segments of the Interstate from Winston-Salem to Candor.