Braille music
Braille music is a braille code that allows music to be notated using braille cells so music can be read by visually impaired musicians. The system was incepted by Louis Braille.
Braille music uses the same six-position braille cell as literary braille. However braille music assigns its own meanings and has its own syntax and abbreviations. Almost anything that can be written in print music notation can be written in braille music notation. However, the notation is an independent and well-developed system with its own conventions.
The world's largest collection of the notation is at the Library of Congress in the United States.
Learning Braille music
Braille music, as with print music, uses a notation system to transcribe the notes, rhythm, and other aspects of a piece of music. Because blind musicians may need both hands to play their instrument, braille music is designed to ease the memorization of a score. Some aspects of the system are therefore more logical or simplified compared to print music; for example, identifying Middle C requires simply reading the written note rather than understanding where it falls on a staff. Visually impaired musicians can begin learning braille music about the time they have reasonable competence reading literary braille.Teaching Braille music
Braille music for beginners, like print music for beginners, is quite simple. Music teachers with no previous knowledge of braille music can easily learn the rudiments of braille music notation and keep a step or two ahead of the student who is learning braille music. Some common print method books have a version in braille so both books can be used alongside each other.Transcribing music into Braille
Many standard works for some genres, for each instrument appear in braille. In the US, they are available from the National Library Service for the Blind and Print Disabled of the Library of Congress and elsewhere. Most countries have a similar national library.However, many visually impaired musicians need music that has never before been transcribed to braille music. In the United States, Canada, United Kingdom, and many other countries a network of braille music transcribers transcribe such music.
Another option is to use a braille-output computer-music system. Most such software automatically converts print notation into braille. While Goodfeel is the oldest and best known braille music translator, there are now other options, including BrailleMUSE, Sao Mai Braille, among others.
Introduction to Braille music symbols and syntax
Some of the most common braille music symbols and combinations are summarized in the chart below. Note that the notes follow the do-re-mi mnemonic, with do abbreviated 'd', and the other notes following alphabetically from there, so that C is written 'd', D is written 'e', E is 'f', F is 'g', G is 'h', A is 'i' and B is 'j'.Pitch and rhythm
As the table below shows, each symbol shows the pitch and choice of two rhythmic lengths of a note which will be context-clear. The notes are noted in dots 1, 2, 4, and 5, while rhythm is noted in dots 3 and 6. Braille aligned the notes with the solfège system, so the note C uses the letter 'd' for "do". In the full scale, C–D–E–F–G–A–B use the same Braille characters as the letters d–e–f–g–h–i–j. Without dot 3 or 6, the indicated note is an eighth note. With dot 6, it is a quarter note; dot 3, a half note; and dots 3,6, a whole note. Every rhythm symbol does double up in meaning: 8th notes match 128th notes; quarter notes match 64th notes; half notes match 32nd notes; and whole notes match 16th notes. Beginners first learn the most common rhythmic value. For advanced users no rhythmic ambiguity arises as the context, including time signature and bar lines, makes the intended rhythmic value clear. For instance, in a measure of time that includes only the symbol with dots 1,3,4, those facts clarify that the symbol is a whole rest.| Rhythmic length | C | D | E | F | G | A | B | Rest |
| Eighth and 128th | ⠙ | ⠑ | ⠋ | ⠛ | ⠓ | ⠊ | ⠚ | ⠭ |
| Quarter and 64th | ⠹ | ⠱ | ⠫ | ⠻ | ⠳ | ⠪ | ⠺ | ⠧ |
| Half and 32nd | ⠝ | ⠕ | ⠏ | ⠟ | ⠗ | ⠎ | ⠞ | ⠥ |
| Whole and 16th | ⠽ | ⠵ | ⠯ | ⠿ | ⠷ | ⠮ | ⠾ | ⠍ |
| Accidental | Mark |
| Flat | ⠣ |
| Sharp | ⠩ |
| Natural | ⠡ |
Octave marks
An octave mark is included before the first note to specify its octave and when it changes unexpectedly. For instance, the 4th Octave is the octave starting with middle C and going up to the B above middle C. A melody clearly proceeding upward from the first octave can, if moving by step, proceed to the second, third, and fourth octaves without requiring additional octave signs. The rule is that, save for an octave mark specifying otherwise, notes move by a unison/no change, 2nd, or 3rd rather than a 6th, 7th, or octave. For instance, the following moves upward continuously, ending in octave 5:The rule for 4ths and 5ths is more conservative. Save for an octave sign specifying otherwise, any melodic leap of a 4th or 5th stays in the same octave as the previous note. For instance, this always stays within Octave 2:
Because of the use of octave marks, clef symbols are not required in braille music. On occasion, clef symbols will be given so the visually impaired musician will be aware of every detail of the print score.
| Octave | Mark |
| Below first | ⠈⠈ |
| First | ⠈ |
| Second | ⠘ |
| Third | ⠸ |
| Fourth | ⠐ |
| Fifth | ⠨ |
| Sixth | ⠰ |
| Seventh | ⠠ |
| Above seventh | ⠠⠠ |
Musical markings
Musical indications like diminuendo, crescendo, or ritardando are inserted inline with the note and rhythm notation and, to differentiate them from note, octave, and other musical signs, always preceded by the "word sign". See the table below for some examples:| Dynamic/tempo | Mark |
| Word sign | ⠜ |
| Fortississimo | ⠜⠋⠋⠋ |
| Fortissimo | ⠜⠋⠋ |
| Forte | ⠜⠋ |
| Mezzo-forte | ⠜⠍⠋ |
| Mezzo-piano | ⠜⠍⠏ |
| Piano | ⠜⠏ |
| Pianissimo | ⠜⠏⠏ |
| Crescendo | ⠜⠉ |
| Crescendo | ⠜⠉⠗⠄ |
| Diminuendo | ⠜⠙ |
| Diminuendo | ⠜⠙⠊⠍⠄ |
| Rallentando | ⠜⠗⠁⠇⠇⠄ |
| Ritardando | ⠜⠗⠊⠞⠄ |
| Ritenuto | ⠜⠗⠊⠞⠑⠝⠄ |
Slurs may be indicated by a slur sign between two notes or bracket slur surrounding a group of notes to be slurred.
Musical signs such as staccato or tenuto are generally placed before the note or chord they affect. The musical signs in the table below are shown modifying a quarter note C :
| Articulation | Mark |
| Staccato | ⠦⠹ |
| Staccatissimo | ⠠⠦⠹ |
| Tenuto | ⠸⠦⠹ |
| Tenuto-staccato | ⠐⠦⠹ |
| Accent | ⠨⠦⠹ |
| Martellato | ⠰⠦⠹ |
| Swell | ⠡⠄⠹ |
"Music hyphen" states that a measure will be continued on the next line.
A "word apostrophe" indicates that the word will be continued on the following line.
Fingering marks are shown in the table below:
| Fingering | Mark |
| Right hand | ⠨⠜ |
| Left hand | ⠸⠜ |
| First finger | ⠁ |
| Second finger | ⠃ |
| Third finger | ⠇ |
| Fourth finger | ⠂ |
| Fifth finger | ⠅ |
Repetition symbols
Braille music tends to be rather bulky. Because of this, a system of repetition symbols—much more extensive than that in print music—exists to reduce page turns, size of scores, and expense of printing.The repetition symbol is used like the printed intra-bar symbol to indicate that a beat, half measure, or full measure is to be repeated.
In addition, braille music often includes instructions such as "repeat measure 2 here" or "repeat measures 5-7 here". Such are in addition to the commonly used repeat marks and first and second endings.
Contrapuntal lines and chords within a staff
Unlike print music notation, braille music is a linear format. Therefore, certain conventions must be used to indicate contrapuntal lines and chords.In-accords
Independent contrapuntal lines within a staff are indicated via whole- or part-measure in-accords. The first of the contrapuntal lines is given, then the second, enclosed by the in-accord symbols. The in-accord symbols indicate that the two lines are to be played simultaneously.Interval notation
Homophonic chordal sections are written using interval notation. For instance, the notation "quarter-note-C, 3rd, 5th" would indicate playing a C along with the notes a 3rd and 5th higher than C, making a chord C-E-G a quarter note in length. Reading the interval notation is somewhat complicated by the fact that some staves use bottom-up notation and some use top-down notation. The modern convention is to specify the main note and let the intervals go up or down from there as appropriate. For instance, in most piano music the left hand specifies the bottom note and intervals go bottom-up while the right hand specifies the top note and intervals go top-down. Many older scores have all staves reading bottom-up or all reading top-down. Most scores have a note indicating the direction of the interval notation. However, in some older scores the direction must be established from the context. By convention, in-accords are given in the same direction as the interval notation. Thus, examining the in-accords is a key to unlock which reading applies.| Interval | Mark |
| Second | ⠌ |
| Third | ⠬ |
| Fourth | ⠼ |
| Fifth | ⠔ |
| Sixth | ⠴ |
| Seventh | ⠒ |
| Eighth | ⠤ |