MZ TS 125/150
The motorcycles MZ TS 125 and MZ TS 150 were built at the VEB Motorradwerk Zschopau between 1973 and 1985. The further development based on the ETS 125 and ETS 150 and was presented to the public for the first time at the Leipzig Autumn Fair in 1972. The series production began in June 1973.
The abbreviation TS in the model name stood for Teleskopgabel, Schwinge.
Technical details
The manufacturer's aim was not a new development, but essentially a visual revision of the predecessor ETS 125/150 and an improvement in suspension comfort. The model received a longer suspension travel on the telescopic fork, a new fuel tank with a capacity of 12 l, the shape of which was based on that of the TS 250, and new side panels. The MM 125/150/2 two-stroke engines that had proven themselves in the ES and ETS models were used, and only the connecting rod bearing and crankshaft details were changed, which made the latter more stable. The previous single sleeve chain for the primary drive was replaced by a duplex chain. The parts of the electrical system were the same as on the TS 250: DC alternator with 60 W output, headlights with 170 mm diameter, asymmetrical dipped beam with 45/40 W dual-filament bulb and 21 W output on the back.As with all MZ models, starting with the RT 125/1, the secondary chain is fully encapsulated with the chain guard made of rubber hoses and the chain case made of Duroplast on the rear wheel hub.
Facelift
Over the course of the production period there were continuous external and technical changes.From spring 1977, the TS was equipped with the improved MM 125/150/3 engine. Now the crankshaft disks and crankshaft stumps were made from one piece, and the stumps were larger in diameter. The crankshaft bearings were improved with radial ball bearings. The piston pin received a needle bearing. The fuel-oil mixture ratio could be reduced for these engines from 33 : 1 to 50 : 1. This made the small TS the last GDR vehicle on which the reduction in the oil proportion to 50 : 1 was implemented.
Number of units
In the first years of production, the series was produced in parallel with the predecessor series ES 125/1 and ES 150/1. A total of 163,409 and 326,052 machines were manufactured. 88% of the production of the TS 125 model was exported.Reception
The magazine Der deutsche Straßenverkehr tested a TS 150 in 1974. The acceleration, braking and suspension of the telescopic fork were rated positively. The engine performance at low speeds was criticized, as were the strong vibrations in the footrests and handlebars and the "shaking" speedometer needle due to a non-elastic engine suspension. Improvements were desired in the grip values of the tires when cornering or leaning.In 1979, the magazine Kraftfahrzeugtechnik tested the TS 150, which had been improved since 1977, in the de Luxe version over a distance of 2500 kilometers. The seating position of the test machine with high handlebars was assessed positively. The wet grip of the tires was criticized.
Although the performance, consumption and reliability were rated as good, the state of the art of the drive in this displacement class was judged very critically. Initially, an elastic engine suspension and a five-speed gearbox were suggested. However, since there had been no progress for a decade, a significant improvement could only be expected with a comprehensive redesign of the engine.
The seating comfort and the workmanship of the seat were also criticized. Furthermore, the use of a 12-volt electric system would be an improvement.
Also in 1979, Der deutsche Straßenverkehr tested a TS 150 de Luxe. The driving characteristics and performance as well as the seat comfort were rated positively. However, as with the test machine from Kraftfahrzeugtechnik, a seam in the seat cover tore. There was room for improvement in the unsatisfactory wet grip of the tires, the braking effect, the strongly noticeable engine vibrations and the difficult-to-operate steering lock. It was also said that the kidney-shaped rear-view mirror was "nostalgic" and impaired the visual impression.