Engine tuning


Engine tuning is the adjustment or modification of the internal combustion engine or Engine Control Unit to yield optimal performance and increase the engine's power output, economy, or durability. These goals may be mutually exclusive; an engine may be de-tuned with respect to output power in exchange for better economy or longer engine life due to lessened stress on engine components.
Tuning can include a wide variety of adjustments and modifications, such as the routine adjustment of the carburetor and ignition system to significant engine overhauls. Performance tuning of an engine can involve revising some of the design decisions taken during the development of the engine.
Setting the idle speed, air-fuel ratio, carburetor balance, spark plug and distributor point gaps, and ignition timing were regular maintenance tasks for older engines and are the final but essential steps in setting up a racing engine.
On modern engines equipped with electronic ignition and fuel injection, some or all of these tasks are automated but they still require initial calibration of the controls. The ECU handles these tasks, and must be calibrated properly to match the engine's hardware.

Engine tune-up

The term "tune-up" usually denotes the routine servicing of the engine to meet the manufacturer's specifications. Tune-ups are needed periodically according to the manufacturer's recommendations to ensure the vehicle runs as expected. Modern automobile engines typically require a small number of tune-ups over the course of an approximate or a 10-year, lifespan. This can be attributed to improvements in the production process in which imperfections and errors reduced by computer automation, and significant improvement in the quality of consumables such as the availability of synthetic engine oil.
Tune-ups may include the following:
The term "Italian tuneup" denotes the driving of a performance car, such as a Ferrari, by mechanics finishing the tune-up to burn out any built-up carbon.

Chip tuning

Modern engines are equipped with an engine management system /Engine Control Unit that can be adjusted to different settings, producing different performance levels. Manufacturers often produce a few engines that are used in a wider range of models and platforms. This allows the manufacturers to sell automobiles in various markets with different regulations without having to spend money developing and designing different engines to fit these regulations. This also allows a single engine tuned to suit the particular buyer's market to be used by several brands.

Remapping

Remapping is the simplest form of stage one engine tuning; it is performed mostly on turbocharged vehicles containing a modern Engine Control Unit. Almost all modern vehicles have an ECU, primarily supplied by Bosch or Delphi Technologies. The ECU has firmware that controls the various parameters under which the engine runs. These parameters include achieving the appropriate balance between fuel consumption, power, torque, fuel emissions, reliability and service intervals. In seeking this balance, many factories firmware do not prioritise power or torque, which means it is possible to increase the performance of the engine by remapping the ECU.
Many manufacturers build one engine and use several firmware versions, known as maps, to achieve different power levels to differentiate vehicles that essentially have an identical engine. This gives users an opportunity to unlock more power from the engine with a few changes to the factory software by reading and editing the factory firmware from the ECU using specialist tools plugged into the on-board diagnostics port. The tools can be connected to the OBD port on any car to read the factory file that is saved on the ECU. Software to read specific types of factory files is available.
Parameters of factory files such as fuel injection, boost pressure, rail pressure, fuel pump pressure and ignition timing, are adjusted to safe limits that are set by an expert so the unlocked performance does not compromise the car's safe levels of reliability, fuel consumption and emissions. The map may be customized for city use, for on-track performance, or for an overall map giving power throughout the band in a linear manner. Once adjusted, the edited file is written back to the ECU with the same tools used for the initial reading, after which the engine is tested for performance, smoke levels, and any problems. Fine-tuning is done according to the feedback, producing a better-performing and more efficient engine.
Remapping may increase the temperature of exhaust fumes.

Performance tuning

Performance tuning is the tuning of an engine for motorsports. Many such automobiles may never compete but are built for show or leisure driving. In this context, the power output, torque, and responsiveness of the engine are of premium importance, but reliability and fuel efficiency are also relevant. In races, the engine must be strong enough to withstand the additional stress placed upon it and the automobile must carry sufficient fuel, so it is often far stronger and has higher performance than the mass-produced design on which it may be based. The transmission, driveshaft and other load-transmitting powertrain components may need to be modified to withstand the load from the increased power.
There are many techniques that can be used to increase the power and/or efficiency of an engine. This can be achieved by modifying the air-fuel mixture drawn into the engine, modifying the static or dynamic compression ratio of the engine, modifying the fuel used, injection of water or methanol, modifying the timing and dwell of ignition events, and compressing the intake air. Air fuel ratio meters are used to accurately measure the amount of fuel in the mixture. Fuel weight will affect the performance of the car, so fuel economy is a competitive advantage.
Ways to increase power include:
  • Increasing the engine displacement by one or both of two methods: "boring" - increasing the diameter of the cylinders and pistons, or by "stroking" - using a crankshaft with a greater throw.
  • Replacing a stock throttle body with either a larger throttle body, an electronic throttle body that opens quickly so that it can access airflow sooner, or a combination of both.
  • Using larger or multiple carburetors to create a more controllable air/fuel mixture to burn and to get it into the engine more smoothly. Fuel injection is more often used in modern engines, and may be modified in a similar manner.
  • Increasing the size of the poppet valves in the engine, thus decreasing the restriction in the path of the fuel–air mixture entering the cylinder and the exhaust gases leaving it. Using multiple valves per cylinder results in the same effect, though it is often more difficult to fit several small valves than to have larger, single valves due to the valve gear required. It can also be difficult to find space for one large valve in the inlet and a large valve on the outlet side, and sometimes a large exhaust valve and two smaller inlet valves are fitted.
  • Using larger bored, smoother, less-contorted inlet manifold and exhaust manifolds helps maintain the velocity of gases. The ports in the cylinder head can be enlarged and smoothed to match. This is termed cylinder head porting. Manifolds with sharp turns force the air–fuel mix to separate at high velocities because fuel is denser than air.
  • The larger bore may extend through the exhaust system using large-diameter piping and low back pressure mufflers, and through the intake system with larger diameter airboxes and high-flow, high-efficiency air filters. Muffler modifications will change the sound of the engine, usually making it louder.
  • Increasing the valve opening height by changing the profiles of the cams on the camshaft or the lever ratio of the valve rockers in overhead valve engines, or cam followers in overhead cam engines.
  • Optimizing the valve timing to improve burning efficiency; this usually increases power at one range of operating RPM at the expense of reducing it at others. This can usually be achieved by fitting a differently profiled camshaft.
  • Raising the compression ratio by reducing the size of the combustion chamber, which makes more efficient use of the cylinder pressure developed and leading to more rapid burning of fuel by using larger compression height pistons or thinner head gaskets or by using a milling machine to "shave" the cylinder head. High compression ratios can cause engine knock unless high-octane fuels are used.
  • Forced Induction; adding a turbocharger or a supercharger. The air/fuel mix entering the cylinders is increased by compressing the air. Further gains may be realized by cooling the compressed intake air with an air-to-air or air-to-water intercooler.
  • Using a fuel with higher energy content and by adding an oxidizer such as nitrous oxide.
  • Using a fuel with better knock suppression characteristics to increase timing advance.
  • Reducing losses to friction by machining moving parts to lower tolerances than would be acceptable for production, or by replacing parts. This is done In overhead valve engines by replacing the production rocker arms with replacements incorporating roller bearings in the roller contacting the valve stem.
  • Reducing the rotating mass comprised by the crankshaft, connecting rods, pistons, and flywheel to improve throttle response due to lower rotational inertia and reduce the vehicle's weight by using parts made from alloy instead of steel.
  • Changing the tuning characteristics electronically, by changing the firmware of the EMS. This chip tuning often works because modern engines are designed to produce more power than required, which is then reduced by the EMS to make the engine operate smoothly over a wider RPM range, with low emissions. This is called de-tuning and produces long-lasting engines and the ability to increase power output later for facelift models. Recently emissions have played a large part in de-tuning, and engines will often be de-tuned to produce a particular carbon output for tax reasons.
  • Lowering the underbonnet temperature to lower the engine intake temperature, thus increasing the power. This is often done by installing thermal insulation – normally a heatshield, thermal barrier coating or other type of exhaust heat management – on or around the exhaust manifold. This ensures more heat is diverted from the under-bonnet area.
  • Changing the location of the air intake, moving it away from the exhaust and radiator systems to decrease intake temperatures. The intake can be relocated to areas that have higher air pressure due to aerodynamic effects, resulting in effects similar to forced induction.
The choice of modification depends on the degree of performance enhancement desired, budget, and the characteristics of the engine to be modified. Intake, exhaust, and chip upgrades are usually among the first modifications made because they are the cheapest and make reasonably general improvements. A change of camshaft, for instance, requires a compromise between smoothness at low engine speeds and improvements at high engine speeds.