Lord Clyde-class ironclad


The Lord Clyde-class ironclads were a pair of wooden-hulled armoured frigates built for the Royal Navy in the 1860s. They were designed by Edward Reed and built to make use of the large stocks of seasoned timber available in the royal shipyards. The ships hold a number of records for the Navy, including being the largest wooden-hulled warships, having the most powerful engines in a wooden ship, and having the worst rolls in the fleet. The lead ship,, initially had a main armament of [RML 7 inch 6.5 ton gun|] rifled muzzle-loading (RML) guns and had a short career that was curtailed by problems with her engine and deterioration of her hull due to the use of unseasoned timber. The second ship of the class,, armed with a mixture of 7 in, [RML 8 inch 9 ton gun|] and [RML 9 inch 12 ton gun|] RML guns, served as the flagship of the Mediterranean Fleet and was mobilised during the Russo-Turkish War, although she did not see active service.

Design and description

The Lord Clyde class were ironclad frigates constructed for the Royal Navy in the 1860s. Unlike other similar ironclad ships that were built for the navy at the time, they were not conversions but new wooden hulls that were encased in iron. Designed by Edward Reed, they were built to use up the stocks of timber at the Chatham and Pembroke Dockyards. The class consisted of two ships, the first named after Field Marshal Colin Campbell, 1st Baron Clyde, and the second after the position of the Lord Warden of the Cinque Ports. They were the largest and fastest steaming wooden ships ever built.
The Lord Clyde class were long between perpendiculars and had a beam of. The ships had a draught of forward and aft. Lord Clyde displaced and had a tonnage of 4,067 tons burthen. Lord Warden displaced and had a tonnage of 4,080 tons burthen. The ships' complement consisted of 605 officers and ratings.

Propulsion

The ships were equipped with different engines, each driving a single propeller. Lord Clyde was powered by a single two-cylinder trunk steam engine that was made by Ravenhill and Hodgson while Maudslay, Sons and Field provided a three-cylinder return connecting rod engine for Lord Warden. The three-cylinder engines were the largest engines to be mounted in a British wooden hull, and also proved to be the most reliable. The greater weight, alongside the addition of a poop deck, contributed to the greater displacement of the latter vessel. Steam was provided by nine rectangular boilers that ran at a pressure of. The ships were designed for a maximum speed of. During trials, on 9 February 1867 in Stokes Bay, Lord Clyde achieved from at an engine speed of 64.8 rpm and, on 13 September near Plymouth, Lord Warden achieved from at an engine speed of 62.3 rpm. The ships carried a maximum of of coal.
They were fully-rigged with three masts and had a sail area of. The mainmast was long with a diameter of. The ships had a similar sail plan, the only difference being that Lord Warden lacked a jibboom. Their best speed under sail alone was, one of the slowest of British ironclads.
Due to their very low centre of gravity, the ships suffered from poor stability, obvious in how much the ships rolled at sea. The issue was so pronounced that it was believed the ships were the least stable in the Victorian fleet, so much so that the flaw was incomparable to the poor stability other vessels. During trials, Lord Clydes roll was so severe that her gun ports became temporarily inoperable and submerged by water while, which sailed with her, was able to use her guns without issue. However, the class was able to sell well regardless of the ships being under sail or steam.

Armament and armour

Lord Clyde was initially armed with twenty-four [RML 7 inch 6.5 ton gun|] rifled muzzle-loading (RML) guns. Four pairs of guns were positioned as fore and aft chase guns on the upper and main decks. The remaining sixteen guns were mounted on the broadside amidships. Lord Warden was designed to carry an armament of fourteen [RML 8 inch 9 ton gun|] and two 7 in RML guns. The ship was completed with two [RML 9 inch 12 ton gun|], fourteen 8 in guns, and two 7 in RML guns. The last guns served as forward chase guns on the main deck where they were very wet and useless in a head sea. One of the 9 in guns was a forward chase gun on the upper deck and the other became the stern chase gun on the main deck. Twelve 8 in guns were mounted on the main deck on the broadside amidships and the remaining pair were positioned on the quarterdeck on the broadside. Lord Clydes original armament was replaced during her 1870 refit with a similar fit. The ships were fitted with a pointed oak ram that was tipped with a bronze casing.
The shell of the 9 in gun weighed while the gun itself weighed. It had a muzzle velocity of and could penetrate of wrought-iron armour. The 8 in gun weighed ; it fired a shell at a muzzle velocity of and was credited with the ability to penetrate of armour. The 7 in gun weighed and fired a shell that was able penetrate of armour.
The entire side of each ship's hull, except for the side of the upper deck, was protected by wrought-iron armour that tapered from at the ends to amidships. It extended below the waterline. The forward chase guns on the upper deck were protected by 4.5-inch armour plates on the sides of the hull and a 4.5-inch transverse bulkhead to their rear protected them from raking fire. The armour was backed by of oak and the iron skin of the ship.

Service

On commissioning, the ships were initially assigned to the Channel Fleet where Lord Clyde spent three months as a temporary flagship. Lord Warden was transferred to the Mediterranean Fleet in 1867, Lord Clyde joining her one-year later. The latter made one cruise during which she fractured her steel mainyard in a squall.
The construction of Lord Clyde faced challenges due to a shortage of seasoned timber at Pembroke Dockyard, leading to the use of green timber. This, combined with the stress caused by the oscillating of her trunk engines, resulted in rapid wear to her engines. Upon reaching Naples, a fleet engineer deemed the engines unsafe, and the ship had to be sailed to the Malta Dockyard for temporary repairs. She returned to Plymouth. Upon being re-engined and rearmed, she remained in reserve until 1871 when she rejoined the Mediterranean Fleet.
On 30 January 1868, Lord Warden was damaged after she was struck by the wooden steam frigate and then, on 3 May, she ran aground and had to be refloated. The ship served as flagship for the fleet between 1869 and 1875. On 14 March 1872, Lord Clyde ran aground whilst attempting to rescue a British steamship that was stranded off the island of Pantellaria. Lord Warden was able to pull her off four days later, but, on returning to Plymouth, naval investigators discovered that the unseasoned timber was infected with fungus and Lord Clyde was sold to be broken up. Lord Warden was later mobilised during the Russo-Turkish War and was assigned to the Particular Service Squadron but saw no service. In 1884, the ship was deemed in sufficiently good condition to be considered as a mount for the new Whitehead torpedo but the idea was dropped and instead she was decommissioned in 1885 and broken up in 1889.