Castle Bravo
Castle Bravo was the first in a series of high-yield thermonuclear weapon design tests conducted by the United States at Bikini Atoll, Marshall Islands, as part of Operation Castle. Detonated on 1 March 1954, the device remains the most powerful nuclear device ever detonated by the United States and the first lithium deuteride–fueled thermonuclear weapon tested using the Teller–Ulam design. Castle Bravo's yield was, 2.5 times the predicted, due to unforeseen additional reactions involving lithium-7, which led to radioactive contamination in the surrounding area.
Radioactive nuclear fallout, the heaviest of which was in the form of pulverized surface coral from the detonation, fell on residents of Rongelap and Utirik atolls, while the more particulate and gaseous fallout spread around the world. The inhabitants of the islands were evacuated three days later and suffered radiation sickness. Twenty-three crew members of the Japanese fishing vessel Daigo Fukuryū Maru were also contaminated by the heavy fallout, experiencing acute radiation syndrome, including the death six months later of Kuboyama Aikichi, the boat's chief radioman. The blast incited a strong international reaction over atmospheric thermonuclear testing.
The Bravo Crater is located at. The remains of the Castle Bravo causeway are at.
Bomb design
Primary system
The Castle Bravo device was housed in a cylinder that weighed and measured in length and in diameter.The primary device was a COBRA deuterium–tritium gas-boosted atomic bomb made by Los Alamos Scientific Laboratory, a very compact MK 7 device. This boosted fission device had been tested in the Upshot–Knothole ''Climax event and yielded . It was considered successful enough that the planned operation series Domino, designed to explore the same question about a suitable primary for thermonuclear bombs, could be canceled. The implosion system was quite lightweight at, because it eliminated the aluminum pusher shell around the tamper and used the more compact ring lenses, a design feature shared with the Mark 5, 12, 13 and 18 designs. The explosive material of the inner charges in the MK 7 was changed to the more powerful Cyclotol 75/25, instead of the Composition B used in most stockpiled bombs at that time, as Cyclotol 75/25 was denser than Composition B and thus could generate the same amount of explosive force in a smaller volume. The composite uranium-plutonium COBRA core was levitated in a type-D pit. COBRA was Los Alamos' most recent product of design work on the "new principles" of the hollow core. A copper pit liner encased within the weapon-grade plutonium inner capsule prevented DT gas diffusion into the plutonium, a technique first tested in Greenhouse Item''. The assembled module weighed, measuring across. It was located at the end of the device, which, as seen in the declassified film, shows a small cone projecting from the ballistic case. This cone is the part of the paraboloid that was used to focus the radiation emanating from the primary into the secondary.
Deuterium and lithium
The device was called SHRIMP, and had the same basic configuration as the Ivy Mike wet device, except with a different type of fusion fuel. SHRIMP used lithium deuteride, which is solid at room temperature; Ivy Mike used cryogenic liquid deuterium, which required elaborate cooling equipment. Castle Bravo was the first test by the United States of a practical deliverable fusion bomb, even though the TX-21 as proof-tested in the Bravo event was not weaponized. The successful test rendered obsolete the cryogenic design used by Ivy Mike and its weaponized derivative, the JUGHEAD, which was slated to be tested as the initial Castle Yankee. It also used a 7075 aluminum ballistic case. Aluminum was used to drastically reduce the bomb's weight and simultaneously provided sufficient radiation confinement time to raise yield, a departure from the heavy stainless steel casing employed by other weapon-projects at the time.The SHRIMP was at least in theory and in many critical aspects identical in geometry to the RUNT and RUNT II devices later proof-fired in the later Romeo and Yankee shots. On paper it was a scaled-down version of these devices, and its origins can be traced back to 1953. The United States Air Force indicated the importance of lighter thermonuclear weapons for delivery by the B-47 Stratojet and B-58 Hustler. Los Alamos National Laboratory responded to this indication with a follow-up enriched version of the RUNT scaled down to a 3/4 scale radiation-implosion system called the SHRIMP. The proposed weight reduction would provide the Air Force with a much more versatile deliverable gravity bomb. The final version tested in Castle used partially enriched lithium as its fusion fuel. Natural lithium is a mixture of lithium-6 and lithium-7 isotopes. The enriched lithium used in Bravo was nominally 40% lithium-6. The fuel slugs varied in enrichment from 37 to 40% in Li, and the slugs with lower enrichment were positioned at the end of the fusion-fuel chamber, away from the primary. The lower levels of lithium enrichment in the fuel slugs, compared with the ALARM CLOCK and many later hydrogen weapons, were due to shortages in enriched lithium at that time, as the first of the Alloy Development Plants started production in late 1953. The volume of LiD fuel used was approximately 60% the volume of the fusion fuel filling used in the wet SAUSAGE and dry RUNT I and II devices, or about, corresponding to about 390 kg of lithium deuteride. The mixture cost about 4.54 USD/g at that time. The fusion burn efficiency was close to 25.1%, the highest attained efficiency of the first thermonuclear weapon generation. This efficiency is well within the figures given in a November 1956 statement, when a DOD official disclosed that thermonuclear devices with efficiencies ranging from 15% to up about 40% had been tested. Hans Bethe reportedly stated independently that the first generation of thermonuclear weapons had efficiencies varying from as low as 15% to up about 25%.
The thermonuclear burn would produce pulsations of high-energy neutrons with an average temperature of 14 MeV through Jetter's cycle.
Jetter's cycle
The Jetter cycle is a combination of reactions involving lithium, deuterium, and tritium. It consumes lithium-6 and deuterium, and in two reactions it produces two alpha particles.The reaction would produce high-energy neutrons with 14 MeV, and its neutronicity was estimated at ≈0.885.
Possible additional tritium for high-yield
As SHRIMP, along with the RUNT I and ALARM CLOCK, were to be high-yield shots required to assure the thermonuclear "emergency capability," their fusion fuel may have been spiked with additional tritium, in the form of LiT. All of the high-energy 14 MeV neutrons would cause fission in the uranium fusion tamper wrapped around the secondary and the spark plug's plutonium rod. The ratio of deuterium atoms burned by 14 MeV neutrons spawned by the burning was expected to vary from 5:1 to 3:1, a standardization derived from Mike, while for these estimations, the ratio of 3:1 was predominantly used in ISRINEX. The neutronicity of the fusion reactions harnessed by the fusion tamper would dramatically increase the yield of the device.''SHRIMP''s indirect drive
Attached to the cylindrical ballistic case was a natural-uranium liner, the radiation case, that was about 2.5 cm thick. Its internal surface was lined with about 240 μm-thick copper foil to increase the overall albedo of the hohlraum. Copper possesses excellent reflecting properties, and its low cost, compared to other reflecting materials like gold, made it useful for mass-produced hydrogen weapons. Hohlraum albedo is a very important design parameter for any inertial-confinement configuration. A relatively high albedo permits higher interstage coupling due to the more favorable azimuthal and latitudinal angles of reflected radiation. The limiting value of the albedo for high-Z materials is reached when the thickness is 5–10 g/cm, or 0.5–1.0 free paths. Thus, a hohlraum made of uranium much thicker than a free path of uranium would be needlessly heavy and costly. At the same time, the angular anisotropy increases as the atomic number of the scatterer material is reduced. Therefore, hohlraum liners require the use of copper, as the absorption probability increases with the value of Z of the scatterer. There are two sources of X-rays in the hohlraum: the primary's irradiance, which is dominant at the beginning and during the pulse rise; and the wall, which is important during the required radiation temperature's plateau. The primary emits radiation in a manner similar to a flash bulb, and the secondary needs constant T to properly implode. This constant wall temperature is dictated by the ablation pressure requirements to drive compression, which lie on average at about 0.4 keV, corresponding to several million kelvins. Wall temperature depended on the temperature of the primary's core which peaked at about 5.4 keV during boosted-fission. The final wall-temperature, which corresponds to energy of the wall-reradiated X-rays to the secondary's pusher, also drops due to losses from the hohlraum material itself. Natural uranium nails, lined to the top of their head with copper, attached the radiation case to the ballistic case. The nails were bolted in vertical arrays in a double-shear configuration to better distribute the shear loads. This method of attaching the radiation case to the ballistic case was first used successfully in the Ivy ''Mike device. The radiation case had a parabolic end, which housed the COBRA primary that was employed to create the conditions needed to start the fusion reaction, and its other end was a cylinder, as also seen in Bravo's declassified film.The space between the uranium fusion tamper, and the case formed a radiation channel to conduct X-rays from the primary to the secondary assembly; the interstage. It is one of the most closely guarded secrets of a multistage thermonuclear weapon. Implosion of the secondary assembly is indirectly driven, and the techniques used in the interstage to smooth the spatial profile of the primary's irradiance are of utmost importance. This was done with the introduction of the channel filler—an optical element used as a refractive medium, also encountered as random-phase plate in the ICF laser assemblies. This medium was a polystyrene plastic foam filling, extruded or impregnated with a low-molecular-weight hydrocarbon, which turned to a low-Z'' plasma from the X-rays, and along with channeling radiation it modulated the ablation front on the high-Z surfaces; it "tamped" the sputtering effect that would otherwise "choke" radiation from compressing the secondary. The reemitted X-rays from the radiation case must be deposited uniformly on the outer walls of the secondary's tamper and ablate it externally, driving the thermonuclear fuel capsule to the point needed to sustain a thermonuclear reaction.. This point is above the threshold where the fusion fuel would turn opaque to its emitting radiation, as determined from its Rosseland opacity, meaning that the generated energy balances the energy lost to fuel's vicinity. After all, for any hydrogen weapon system to work, this energy equilibrium must be maintained through the compression equilibrium between the fusion tamper and the spark plug, hence their name equilibrium supers.
Since the ablative process takes place on both walls of the radiation channel, a numerical estimate made with ISRINEX suggested that the uranium tamper also had a thickness of 2.5 cm, so that an equal pressure would be applied to both walls of the hohlraum. The rocket effect on the surface of tamper's wall created by the ablation of its several superficial layers would force an equal mass of uranium that rested in the remainder of the tamper to speed inwards, thus imploding the thermonuclear core. At the same time, the rocket effect on the surface of the hohlraum would force the radiation case to speed outwards. The ballistic case would confine the exploding radiation case for as long as necessary. The fact that the tamper material was uranium enriched in U is primarily based on the final fission reaction fragments detected in the radiochemical analysis, which conclusively showed the presence of U, found by the Japanese in the shot debris. The first-generation thermonuclear weapons all used uranium tampers enriched to 37.5% U. The exception to this was the MK-15 ZOMBIE that used a 93.5% enriched fission jacket.