International Loadstar

The International Loadstar is a series of trucks that were produced by International Harvester from 1962 to 1978. The first purpose-built medium-duty truck designed by the company, International slotted the Loadstar between its light-duty pickup trucks and the heavy-duty R-series. Following the discontinuation of the latter, the Loadstar became the smallest International conventional, slotted below the Fleetstar and Transtar conventionals.
Produced primarily as a straight truck, the Loadstar was developed primarily for applications such as local delivery, construction, and agriculture. Along with fire truck applications, the Loadstar was offered as a "Schoolmaster" cowled school bus chassis.
In 1978, International introduced the medium-duty S-Series, consolidating the Loadstar and Fleetstar into a single model family.

Production and models

International manufactured a complete line of trucks and used few light and medium-duty vendor parts. A conservative company, components had long production runs without model year changes. The Loadstar itself changed very little over its sixteen year production run. Early models were recognizable by their grey grill, curved fenders and "butterfly" hood, but a squared-off one-piece fiberglass tilting hood was added to the line-up from model year 1972 onwards.

Loadstar

Most Loadstars had a medium-duty 4x2 chassis, but 4x4, 6x4, and 6x6 models were also built. A four-door crew cab was also available. The cab, also used on the Fleetstar, had been introduced on the A-series in 1957.
Models included: Binder, 1600, 1700, 1750, 1800, F1800, 1850, and F1850, with the numbers indicating the size and weight rating of the model. The 1750 and 1850 had mid-range diesels. The 1600 and 1700 were available with 4x4, the F1800 and F1850 had tandem rear axles.

Loadstar CO

The Loadstar CO 1600, 1700, and 1800 were forward control cab-over-engine versions of the Loadstar, built from 1963 until 1970. They were available with loaded weights from. For 1971, the Loadstar CO became the Cargostar, with a wider cab and larger grille; the model line would be produced through 1986.

Schoolmaster

The Schoolmaster 1603, 1703, and 1803, and 1853 were cowl-chassis models used for school-bus type bodies. The Loadstar also served as the basis for the 173/183 FC and 183/193 RE stripped chassis for transit-style school buses.

Design overview

Chassis

Models other than semi-tractors had vacuum assisted hydraulic drum brakes standard. Air over hydraulic and full air brakes were available. A driven front axle and tandem rear axles were available on some models. Loaded weights were from and up to including trailers.

Engines

Gasoline, CNG, and mid-range diesel engines were used. The short hood of the Loadstar meant that V-8 engines fit better than straight-six engines.
The V304/345/392 family was the primary engine of the Loadstar between 1962 and 1973. They are overhead valve gasoline V8s. They developed respectively. CNG V345s were also available. In 1962 the V304 was standard on the 1600 and 1700 while the V345 was standard on the 1800. On most models the next larger engine was optional. In 1974 the V345 became standard on the 1600.
The MV404 was introduced in 1974. It was a overhead valve gasoline V8 with a 4-barrel carburetor. It developed and of torque. It became standard on the 1700 and 1800.
The BD264/282/308 family were the only inline-six cylinder gasoline engines offered. They were and developed respectively.
Mid-range diesels were International V8s up to, the Detroit Diesel 6V53 with, and Perkins inline-sixes up to.

Model	Max. front GAWR	Max. rear GAWR	Max. GVWR	Engine	Trans
Binder	5,000 LB	14,200 lb	19,200 lb	V-345	4 spd.
1600				V-345	5 spd.
1600 4x4				V-345	5 spd.
1700				MV-404	4 spd.
1700 4x4				V-345	5 spd.
1800				MV-446	10 spd.
1850				D-170	5 spd.
F1800 6x4				MV-404	5 spd.
F1850 6x4				D-170	5 spd.

Driveline

Four- and five-speed manual transmissions were used on most models. A 2-speed rear axle was available on any gasoline single-axle model. Diesel models were available with 8- and 10-speed Roadranger manual transmissions. Four- and six-speed automatic transmissions were available on some models.

Navistar concept (2012)

There was a plan in 2012 to revive the Loadstar name for a series of heavy duty low-slung cabover trucks, to be particularly suitable for waste hauling. This Loadstar was to have offered a stainless steel cab to resist the corrosion associated with waste disposal, airplane refueling, and other such fields for which the truck was intended.
Production was scheduled to begin in 2013 but never did.