Hp-FEM


hp-FEM is a generalization of the finite element method for solving partial differential equations numerically based on piecewise-polynomial approximations. hp-FEM originates from the discovery by Barna A. Szabó and Ivo Babuška that the finite element method converges exponentially fast when the mesh is refined using a suitable combination of h-refinements and p-refinements. The exponential convergence of hp-FEM has been observed by numerous independent researchers.

Differences from standard FEM

The hp-FEM differs from the standard FEM in many aspects.
  • Choice of higher-order shape functions: The higher-degree polynomials in elements can be generated using different sets of shape functions. The choice of such a set can influence dramatically the conditioning of the stiffness matrix, and in turn the entire solution process.
  • Automatic hp-adaptivity: In hp-FEM, an element can be hp-refined in many different ways, such as: Increasing its polynomial degree without subdividing it in space, or subdividing the element geometrically, where various polynomial degrees can be applied to the sub-elements. The number of element refinement candidates easily reaches 100 in two dimensions and 1000 in three dimensions. One number indicating the size of the error in an element is not enough to guide automatic hp-adaptivity. Other techniques such as reference solutions or analyticity considerations must be employed to obtain more information about the shape of error in every element.
  • The ratio of assembling and solution CPU times: In standard FEM, the stiffness matrix usually is assembled quickly but it is quite large. Typically, the solution of the discrete problem consumes the largest part of the overall computing time. By contrast, the stiffness matrices in hp-FEM typically are much smaller, but their assembly takes more time than in standard FEM. This is mainly due to the computational cost of numerical quadrature, which must have higher precision, and therefore be of higher order, compared to standard FEM to take advantage of the faster convergence rates.
  • Programming challenges: It is much harder to implement a hp-FEM solver than standard FEM code. The multiple issues that need to be overcome include : higher-order quadrature formulas, higher-order shape functions, connectivity and orientation information relating shape functions on the reference domain with basis functions in the physical domain, etc.

    Solution to Fichera problem

The Fichera problem is a standard benchmark problem for adaptive FEM codes. One can use it to show the dramatic difference in the performance of standard FEM and hp-FEM. The problem geometry is a cube with a missing corner. The exact solution has a singular gradient at the centre. The knowledge of the exact solution makes it possible to calculate the approximation error exactly and thus compare various numerical methods. For illustration, the problem was solved using three different versions of adaptive FEM: linear elements, quadratic elements, and hp-FEM.
The convergence graphs show the approximation error as a function of the number of degrees of freedom. DOF refers to unknown parameters that are needed to define the approximation, and the number of DOF equals the size of the stiffness matrix. The reader can see in the graphs that the convergence of the hp-FEM is much faster than the convergence of both other methods. The performance gap is large enough that the linear FEM might not converge at all and the quadratic FEM would need hundreds of thousands or perhaps millions of DOF to reach the accuracy that hp-FEM attained with approximately 17,000 DOF. Obtaining very accurate results using relatively few degrees of freedom is the main strength of hp-FEM.

Efficiency of hp-FEM

Smooth functions can be approximated much more efficiently using large high-order elements than small piecewise-linear ones. This is illustrated in the figure below, where a one-dimensional Poisson equation with zero Dirichlet boundary conditions is solved on two different meshes. The exact solution is the sine function.
  • Left: mesh consisting of two linear elements.
  • Right: mesh consisting of one quadratic element.
Piecewise-linear approximation.
Quadratic approximation.
While the number of unknowns is the same in both cases, the errors in the corresponding norm are 0.68 and 0.20, respectively. This means that the quadratic approximation was roughly 3.5 times more efficient than the piecewise linear one. When we proceed one step further and compare four linear elements to one quartic element, then both discrete problems will have three DOFs, but the quartic approximation will be approximately 40 times more efficient.
On the contrary, small low-order elements can capture small-scale features such as singularities much better than large high-order ones. hp-FEM is based on an optimal combination of these two approaches which leads to exponential convergence. Note that this exponential convergence is expressed in the axis of error vs. degrees of freedom. For real-life applications, we usually consider the computational time needed to reach the same level of accuracy. For this performance indicator h- and hp-refinement can provide similar results. As soon as it is harder to program and parallelize hp-FEM compared to h-FEM, the convergence excellence of hp-refinement may become impractical.

Hp-adaptivity

Some FEM sites describe hp-adaptivity as a combination of h-adaptivity and p-adaptivity. This is not entirely accurate, as hp-adaptivity is significantly different from both h- and p-adaptivity as the hp-refinement of an element can be done in many different ways. Besides a p-refinement, the element can be subdivided in space, but there are many combinations for the polynomial degrees on the sub-elements. This is illustrated in the figure on the right. For example, if a triangular or quadrilateral element is subdivided into four sub-elements where the polynomial degrees are allowed to vary by at most two, then this yields 3^4 = 81 refinement candidates. Analogously, splitting a hexahedron into eight sub-elements and varying their polynomial degrees by at most two yields 3^8 = 6,561 refinement candidates. Standard FEM error estimates providing one constant number per element is not enough to guide automatic hp-adaptivity.

Higher-order shape functions

In standard FEM one only works with shape functions associated with grid vertices. In contrast, when using hp-FEM, one moreover regards edge functions, face functions,
and bubble functions. The following images show these functions restricted to a single element. All these functions are defined in the entire element interior.

Open source hp-FEM codes

  • Deal.II: Deal.II is a free, open-source library to solve partial differential equations using the finite element method.
  • : C/C++ hp-FEM/DGFEM/BEM library for elliptic equations developed at SAM, ETH Zurich, and in the group of K. Schmidt at TU Berlin.
  • 2dhp90, 3dhp90: Fortran codes for elliptic problems and Maxwell's equations developed by L. Demkowicz at ICES, UT Austin.
  • PHAML: The Parallel Hierarchical Adaptive Multi-level Project. Finite element software developed at the National Institute for Standards and Technology, USA, for the numerical solution of 2D elliptic partial differential equations on distributed memory parallel computers and multi-core computers using adaptive mesh refinement and multi-grid solution techniques.
  • Hermes Project: C/C++/Python library for rapid prototyping of space- and space-time adaptive hp-FEM solvers for a large variety of PDEs and Multiphysics PDE systems, developed by the hp-FEM group at the University of Nevada, Reno, Institute of Thermo-mechanics, Prague, and the University of West Bohemia in Plzeň – with the Agros2D engineering software built on top of the Hermes library.
  • : PHG is a toolbox for developing parallel adaptive finite element programs. It's suitable for h-, p- and hp-fem. PHG is currently under active development at the State Key Laboratory of Scientific and Engineering Computing, Institute of Computational Mathematics, and Scientific/Engineering Computing of the Chinese Academy of Sciences. PHG deals with conforming tetrahedral meshes and uses bisection for adaptive local mesh refinement and MPI for message passing. PHG has an object-oriented design that hides parallelization details and provides common operations on meshes and finite element functions in an abstract way, allowing the users to concentrate on their numerical algorithms.
  • is a finite element analysis code tailored for the solution of multi-physics problems with arbitrary levels of approximation and different levels of mesh refinement and optimized for high-performance computing. It is designed to be able to manage complexities related to a heterogeneous order of approximations for L2, H1, H-div, and H-curl spaces.
  • is an open-source spectral/hp-FEM framework.
  • is a multi-physics, hp-adaptive, user-friendly, open-source C++ finite element library currently developed at Tampere University, Finland. It combines 3D tetrahedral & 2D triangle/quadrangle conformal adaptive mesh refinement with arbitrary order hierarchical H1 & H-curl function spaces for general static and transient hp-FEM.

    Commercial hp-FEM software

  • is a finite element analysis tool with capabilities oriented toward detailed structural analysis.