Home wiring


Home wiring is electrical wiring for houses. It includes wiring for lighting and power distribution, permanently installed and portable appliances, telephone systems, heating or ventilation system control, and increasingly for home theatre and computer networks.
Safety regulations for wiring installation vary widely around the world, with national, regional, and municipal rules sometimes in effect. Some places allow homeowners to install some or all of the wiring in a home; other jurisdictions require electrical wiring to be installed by licensed electricians only.

Typical features

In new home construction, wiring for all electrical services can be installed before the walls are finished. In existing buildings, installing a new system, such as a security system or home theater, may require additional effort to install concealed wiring. Multiple-unit dwellings, such as condominiums and apartment houses, may have added complexity in distributing services within the building.
Common services include:
Power points
Light fixtures and switches
Telephone
Internet
Television, either broadcast, cable, or satellite
High-end features might include:
Home theater
Distributed audio
Security monitoring
Security CCTV
Automation
Energy management
Power and telecommunication services generally require entry points into the home and a location for connection equipment. For electric power supply, a cable is run either overhead or underground into a distribution board in the home. A distribution board, or circuit breaker panel, is typically a metal box mounted on a wall of the home. In many new homes, the electrical switchboard is located on the outside of the external wall of the garage.
How services are connected will vary depending on the service provider and location of the home.
The following home services are supported by discrete wiring systems:
Information and communications
Entertainment
Energy management
Security and safety
Digital home health
Aged and assisted living
Intelligent lighting and power
In new home construction, wiring for all electrical services can be installed before the walls are finished. In existing buildings, installation of a new system, such as a security system or home theater, may require additional effort to install concealed wiring. Multiple-unit dwellings such as condominiums and apartment houses may have additional installation complexity in distributing services within a house.
Services commonly found include
  • Power points
  • Light fixtures and switches
  • Telephone
  • Internet
  • Television, either broadcast, cable, or satellite
High-end features might include
  • Home theater
  • Distributed audio
  • Security monitoring
  • Security CCTV
  • Automation
  • Energy management
Power and telecommunication services generally require entry points into the home and a location for connection equipment. For electric power supply, a cable is run either overhead or underground into a distribution board in the home. A distribution board, or circuit breaker panel, is typically a metal box mounted on a wall of the home. In many new homes, the location of the electrical switchboard is on the outside of the external wall of the garage.
How services are connected will vary depending on the service provider and location of the home.
The following home services are supported by discrete wiring systems
  1. Information and communications
  2. Entertainment
  3. Energy management
  4. Security and safety
  5. Digital home health
  6. Aged and assisted living
  7. Intelligent lighting and power

    Elements

Power point

need to be installed throughout the house in locations where power will be required. In many areas the installation must be done in compliance with standards and by a licensed or qualified electrician. Power points are typically located where there will be an appliance installed such as telephone, computers, television, home theater, security system, or CCTV system.

Light fittings and switches

The number of light fitting does depend on the type of light fitting and the lighting requirements in each room. The incandescent light bulb made household lighting practical, but modern homes use a wide variety of light sources to provide desired light levels with higher energy efficiency than incandescent lamps. A lighting designer can provide specific recommendations for lighting in a home. The layout of lighting in the home must consider control of lighting since this affects the wiring. For example, multiway switching is useful for corridors and stairwells so that a light can be turned on and off from two locations. Outdoor yard lighting, and lighting for outbuildings such as garages may use switches inside the home.

Telephone

Telephone wiring is required between the telephone company's service entrance and locations throughout the home. Often a home will have telephone outlets in the kitchen, study, living room or bedrooms for convenience. Telephone company regulations may limit the total number of telephones that can be in use at one time. The telephone cabling typically uses two pair twisted cable terminated onto a telephone plug. The cabling is typically installed as a daisy chain starting from the point where the telephone company connects to the home or outlets may each be wired back to the entrance.

Data

Data wiring has two components:
  1. Data service delivery
  2. Data network cable
The three most common ways data services are delivered to the home are
  1. ADSL service on the back of the telephone cabling
  2. Cable Modem
  3. Fiber Optic

    ADSL service

services are typically delivered using telephone cabling. An ADSL modem needs a filter to segregate voice handsets from the ADSL modem.

Cable modem

s are typically installed in location where there is an existing Pay TV service outlet. The installation requires the installation of a Pay TV outlet.

Fiber optic

A cable composed of glass fiber optic strands connects from the main service cables along a street to the subscribers house, and terminates on what is known as an Optical Network Termination unit. The ONT has a data port where cabling from the street connects to a point on the house, and these individual cables are typically installed by the service provider.
In all three cases, the equipment supplied by the Internet provider will have a connection to the computers installed in the building. This is the data network cabling or LAN cabling.
If more than one computer or device is to be connected in the home, LAN cabling will be required. The cabling used for data networking is similar to the phone cabling as it is twisted pair but of a much higher quality. The cable is known as Category 5 or Cat 6. The cabling must be installed as a star wired configuration, that is the cabling runs from the point next to the modem, hub, or router uninterrupted up to the outlet next to the device that needs to be connected. Computer network wiring cannot be chained from one outlet to the next; each outlet is wired individually back to the hub or router next to the modem. If only one computer is required, it can be directly plugged into the modem. An alternative to a wired LAN especially useful for mobile devices is a wireless LAN, which can reduce or eliminate all the fixed wiring.

Television

Cabling for free to air TV requires the following:
  1. An antenna
  2. Coaxial cable
  3. TV outlets
Antenna types vary depending on location; an urban area with nearby transmitters will require a smaller antenna than a rural site with distant stations. The antenna is often mounted outdoors on the roof or a tower. A coaxial or twin-lead cable is run from the antenna to the location where the television is located. One common type of cable is designated RG-6 Tri-shield or quad-shield cable. The cable is terminated on a television outlets, typically an F connector mounted on a face plate. If there are multiple outlets, an RF splitter is used to divide the signal among them; outlets on the splitter are connected to television outlets at each location. RF splitters come with different types; some include amplifiers for multiple outlets.
Whilst most TV outlets use the F connector the Television or digital set top box usually come with a connector known as Belling Lee so the cable used to connect from the TV outlet to the television will need to have an F connector in one end and a Belling Lee connector at the other end.
The distribution of pay TV through the home uses the same type of cabling used for Free to Air TV with some variations. The variations are:
  1. There is no antenna as there is either a satellite dish or a cable from the street.
  2. The cabling must be RG-6 quad shield.
  3. You may be required to use the cable and cabling connectors approved by your pay TV provider
  4. A Pay TV Set Top Box needs to be installed at each television where you want to have access to Pay TV services.
In most cases the pay TV company will supply and install the satellite dish or cable from the street and the cabling to the TV set. In many cases Pay TV services also require a telephone point to access movies on demand.
IPTV is television delivered to the home over the Internet. Any device for viewing IPTV must have an internet connection. This may be a wired connection, or wireless.

Home theater

Home theater pre-wiring requires knowledge of the number of speakers to be installed.
  1. Two front speakers; one on the left of the screen and one on the right of the screen,
  2. One front speaker cable just above or below the screen which is the middle front
  3. Two rear speakers; one on the left and one of the right in line with front left and right speaker locations
  4. The sub-woofer which can be anywhere in the room acoustically but must be relatively close to the active equipment the amplifier or surround sound receiver.
The speaker cable is figure eight multi-strand copper cable. Cabling for the sub-woofer is typically a single shielded cable terminated on an RCA connector. A 7.1 channel system also needs cable for speakers that are installed between the front and back speakers.
The simplest layout for a home theater system is a single piece of furniture containing all one's AV equipment, which simplifies wiring. If, on the other hand, a front projection unit is to be employed, more thought must be given to the layout of the system. Several different cabling systems are commonly used for this application, including HDMI, DVI, and VGA.