Honda B engine


The B-series are a family of inline four-cylinder DOHC automotive engines introduced by Honda in 1988. Sold concurrently with the D-series which were primarily SOHC engines designed for more economical applications, the B-series were a performance option featuring dual overhead cams along with the first application of Honda's VTEC system in certain models, high-pressure die cast aluminum block, cast-in quadruple-Siamese iron liners.
To identify a Honda B-series engine, the letter B is normally followed by two numbers to designate the displacement of the engine, another letter, and in US-spec engines, another number. The Japanese spec-engines are normally designated with a four character alphanumeric designation. The B-series, the B20B variant in particular, is not to be confused with the earlier Honda B20A engine introduced in 1985 and primarily available in the Prelude and Accord-derived vehicles from 1985 to 1991. While sharing some design elements and both being multivalve Honda four-cylinders, the B-series and B20A differ substantially in architecture, enough to be considered distinct engine families.
They were made in,,,, and variants, with and without VTEC. Later models have minor upgrades including modifications to the intake valves and ports and piston tops, along with individual cylinder oil injectors. They produce between and, with some models capable of a redline of 8400 rpm.
Although it has many variations, the basic design differs very little among the B-Series. There are actually two short blocks which are used for the entire series. The distinction between them was the cylinder block deck height. The one used for B16 and B17 engines has a deck height of while the short block used for B16B, B18 and B20 engines has a deck height of.
The Honda B16 has appeared in six different forms over the years.
The Honda B-series was replaced by the K-series in Civic, Integra, Odyssey, and CR-V applications.

B16

B16A (First generation)

The first VTEC engine.
  • B16A found in:
  • *1989-1993 Honda Integra XSi
  • *1989-1991 Honda CRX SiR
  • *1989-1991 Honda Civic SiR
  • Displacement:
  • Compression: 10.2:1
  • Bore x Stroke:
  • Rod Length:
  • Rod/stroke ratio: 1.745
  • Power: at 7600 rpm & at 7000 rpm
  • RPM:
  • *VTEC engagement: 4500 rpm
  • *Redline: 8000 rpm
  • *Rev Limit: 8200 rpm
  • Transmission: S1/J1/YS1, Y1
  • ECU code: P-fk1, PW0, PR3 OBD0

B16A (Second generation)

  • Found in:
  • *1992–1993 Honda Integra "XSi"
  • *1992–1994 Honda Civic SiR/SiRII
  • *1992–1993 Honda Civic Ferio SiR
  • *1992–1995 Honda CR-X del Sol SiR
  • *1996–1998 Honda Civic SiR/SiRII
  • *1996–2000 Honda Civic Ferio SiR
  • Displacement:
  • Compression: 10.4:1
  • Bore x Stroke:
  • Rod Length:
  • Rod/stroke ratio: 1.745
  • Power: MT: at 7400 rpm & at 7000 rpm
  • RPM:
  • *VTEC engagement: 5500 rpm
  • *Redline: 8200 rpm
  • *Rev Limit: 8200 rpm
  • Transmission: YS1/S4C/Y21/S21/ S24A
  • ECU code: P30, PR3
  • OBD1 P2T OBD2

B16B (Type R)

  • Found in:
  • * 1997–2000 Civic Type R
  • Displacement:
  • Compression ratio: 10.8:1
  • Bore x stroke:
  • Rod/Stroke ratio: 1.85:1
  • Rod Length:
  • Power: at 8,200 rpm
  • Torque: at 7500 rpm
  • RPM:
  • *VTEC engagement: 6,100 rpm
  • *Redline: 8,400 rpm
  • *Rev Limit: 8,600 rpm
  • Transmission: S4C With Helical LSD
  • ECU code: PCT
  • ECU Socket Type: OBD-2A / OBD-2B
Note: This engine uses the same block as the Integra Type R, which is taller than the B16A block, but with a crank the same stroke as the B16A. It uses longer rods to accommodate for this, which is why the Rod/Stroke ratio is higher than a standard B16. It is basically a ‘Destroked B18C Type R engine’

B16A1

  • VTEC
  • Found in:
  • * CRX 1.6 DOHC VTEC - European market
  • * Civic 1.6 DOHC VTEC - European market
  • Displacement:
  • Bore×Stroke:
  • Compression: at 10.2:1
  • Power: at 7600 rpm
  • Torque: at 7100 rpm
  • RPM:
  • * VTEC engagement: 5200 rpm
  • * Redline: 8000 rpm
  • * Rev Limit: 8200 rpm
  • Transmission: Y2
  • OBD0
  • ECU CODE: PW0

B16A2

  • DOHC VTEC
  • Found in:
  • *1992-2000 Honda Civic EDM VTi
  • *1992-1997 Honda Civic del Sol EDM VTi
  • *1996-1997 Honda Civic del Sol VTEC USDM
  • *1996-1998 Honda Civic AUDM & NZDM Vti-R
  • *1999-2000 Honda Civic AUDM Vti-R
  • *1999-2000 Honda Civic USDM Si
  • * 1996–2000 Honda Civic – Middle East & South Africa VTEC
  • *1999-2000 Honda Civic SiR Philippines
  • *1999-2000 Honda Civic CDM SiR
  • Displacement:
  • Bore×Stroke:
  • Power: at 7600 rpm & at 6500 rpm
  • Compression: 10.2:1
  • RPM:
  • * VTEC engagement: 5600 rpm
  • * Redline: 8000 rpm
  • * Rev Limit: 8200 rpm
  • Transmission: Y21, S4C

B16A3

  • DOHC VTEC
  • Found in:
  • *1994-1995 Del Sol VTEC USDM VERSION
  • Displacement:
  • Power: at 7600 rpm & at 6700 rpm
  • Compression: 10.2:1
  • Bore×Stroke:
  • RPM:
  • *VTEC engagement: 5600 rpm
  • *Redline: 8200 rpm
  • *Rev Limit: 8500 rpm
  • Transmission: Y21
  • OBD1 PR3 is also stamped on head

B16A4

  • VTEC
  • Found in:
  • * 1996-2000 Civic Si-RII
  • Displacement: 1,595 cc
  • Compression: 10.4:1
  • Power: 130 kW at 7800 rpm & 111 ft·lbf at 7300 rpm
  • Redline: 8000 rpm
  • Transmission: Y21

B16A5

  • VTEC
  • Found in:
  • *1996-2000 Civic Si-RII
  • Displacement:
  • Compression: 10.4:1
  • Power: at 7800 rpm & at 6300 rpm
  • Redline: 8500 rpm
  • Transmission: Y21
Note: Only offered on SiRs with automatic transmissions.

B16A6

  • VTEC
  • Found in:
  • *1996–2000 Honda Civic – Middle East & South Africa VTEC
  • Displacement:
  • Compression: 10.2:1
  • Power: at 7800 rpm & at 6400 rpm
  • Transmission: S4C
  • VTEC engagement: 5500 rpm

B17

B17A1

  • VTEC
  • Found in:
  • *1992–1993 Integra GS-R
  • **Displacement:
  • **Bore x Stroke:
  • **Rod/Stroke Ratio: 1.63
  • **Rod Length:
  • **Compression: 9.7:1
  • **VTEC engagement: 5750 rpm
  • **Power: at 7600 rpm & at 7000 rpm
  • **Redline: 8000 rpm
  • **Fuel Cutoff: 8250 rpm
  • **First DOHC VTEC B series to be marketed in North America as export only. Not available in Japan.
  • **Came equipped with the YS1 cable transmission, which was different from other cable B-series YS1 transmissions as it has a different input shaft and a shorter final drive.

B18

B18A1

  • Non-VTEC
  • Found in:
  • *1990–1991 Acura Integra USDM "RS/LS/LS Special Edition/GS"
  • **OBD0
  • **Displacement:
  • **Compression: 9.2:1
  • **Bore x Stroke:
  • **Rod Length:
  • **Rod/Stroke Ratio: 1.54
  • **Redline: 6500 rpm
  • **Rev Limit: 7200 rpm
  • **Programmed fuel injection
  • **Power: at 6000 rpm & at 5000 rpm
  • **Transmission: S1, A1, cable.
  • Found in:
  • *1992-1993 Acura Integra USDM "GS/LS/LS Special Edition/RS"
  • **OBD1 PR4 ECU
  • **Displacement:
  • **Compression: 9.2:1
  • **Bore x Stroke:
  • **Rod Length:
  • **Rod/Stroke Ratio: 1.54
  • **Redline: 6700 rpm
  • **Rev Limit: 7200 rpm
  • **Programmed fuel injection
  • **Power: at 6300 rpm & at 5000 rpm
  • **Transmission: YS1, cable. Larger input shaft than 90–91. Uses same clutch as 94+ B series hydro.

B18A2

  • Non-VTEC
  • Found in:
  • *1990-1992 Honda Integra LS DB1 Sedan
  • **OBD0 PR4 ECU
  • **Displacement:
  • **Compression: 9.2:1
  • **Bore x Stroke:
  • **Rod Length:
  • **Rod/Stroke Ratio: 1.54
  • **Redline: 6500 rpm
  • **Rev Limit: 6700 rpm
  • **Programmed fuel injection
  • **Power: at 6300 rpm & at 5000 rpm
  • **Transmission: YS1, cable.

B18B1

  • DOHC Non VTEC
  • ECU code:P75
  • Found in:
  • *94-01 Integra RS/LS/SE/GS - DB7/DC4/DC3
  • *1994–2000 Honda Integra "RS/LS/GS/SE/"
  • *1992–1996 JDM Honda Domani
  • *1993–1994 JDM Honda Integra
  • *1996–1999 JDM Honda Orthia
  • **Displacement:
  • **Compression: 9.2:1
  • **Bore x Stroke:
  • **Rod Length:
  • **Rod/Stroke Ratio: 1.56
  • **Power: at 6300 rpm & at 5200 rpm
  • **Redline: 6800 rpm
  • **Rev Limit: 7300 rpm
  • **Transmission: Y80/S80 Hydraulic
  • **JDM version is marked B18B on the block without any number.
  • **JDM version has 9.4:1 compression ratio whereas the USDM version has 9.2:1.
  • **JDM version's higher compression ratio and factory tuning results in higher torque and power ratings
  • **ECU code:P75

B18B2

  • DOHC Non-VTEC
  • Found in:
  • *94-01 Integra RS/LS/SE/GS - DB7/DC4/DC3
  • *1994–2001Honda Integra "RS/LS/GS/SE/"
  • **Displacement:
  • **Compression: 9.2:1
  • **Bore x Stroke:
  • **Rod Length:
  • **Rod/Stroke Ratio: 1.56
  • **Power: at 6300 rpm & at 5200 rpm
  • **Redline: 6800 rpm
  • **Rev Limit: 7300 rpm
  • **Transmission: Y80/S80
  • **ECU code: P75

B18B3

  • DOHC NON VTEC
  • Found in:
  • *1992–1995 Honda Civic – Middle East & South Africa
  • **Displacement:
  • **Compression: 9.2:1
  • **Bore x Stroke:
  • **Power: at 6000 rpm & at 5000 rpm
  • **Transmission: Y80
  • **Ecu code: P34

B18B4

  • DOHC NON VTEC
  • Found in:
  • *1996–2000 Honda Civic – Middle East & South Africa Ballade
  • *1999-2000 Honda Civic Si - Thailand
  • **Displacement:
  • **Compression: 9.2:1
  • **Bore x Stroke:
  • **Power: at 6200 rpm & at 4900 rpm
  • **Transmission: S80
  • ** Ecu code:P6T

JDM B18C Type R

  • DOHC VTEC
  • Identification: PR3 stamp on engine head, top radiator hose connected towards back of head
  • Found in:
  • *95-00 Honda Integra JDM Type R
  • **Redline: 8400 rpm
  • **Rev Limit: 8900 rpm
  • **Power: at 8000 rpm & at 7500 rpm '; at 8000 rpm & at 6200 rpm '
  • **Transmission: S80 with Helical LSD
  • **S80 spec: J4D, N3E
  • **Displacement:
  • **Compression: 11.1:1
  • **Bore x Stroke:
  • **Rod Length:
  • **Rod/Stroke Ratio: 1.58
  • **VTEC engagement: 5800 rpm 6000 rpm
  • **ECU code: P73-003 P73-013 P73-023
JDM B18C
SiR-G/GSR
  • VTEC
  • Found in:
  • *95-98 Honda Integra JDM SiR/SiR II
  • *98-99 Honda Integra JDM SiR-G
  • *2000 Vemac RD180
  • **Identification top rad hose connected towards front of head
  • **Redline: 8000 rpm
  • **Rev Limit: 8200 rpm
  • **Power: at 7200 rpm & at 6200 rpm
  • **Displacement:
  • **Compression: 10.6:1
  • **Bore x Stroke:
  • **ECU code: P72
  • **VTEC engagement: 4400 rpm
  • **Transmission Y80

B18C1

  • DOHC VTEC
  • Found in:
  • *1994–2001 Acura Integra USDM GS-R
  • **Displacement:
  • **Compression: 10.0:1
  • **Bore x Stroke:
  • **Rod Length:
  • **Rod/Stroke Ratio: 1.58
  • **Power: at 7600 rpm
  • **Torque: at 6200 rpm
  • **Redline: 8100 rpm
  • **Secondary Runners Open: 5,750 rpm
  • **VTEC engagement: 4400 rpm
  • **ECU code: P72

B18C2

  • DOHC VTEC
  • Found in:
  • * 1994-2001 Honda Integra AUDM/NZDM VTi-R
  • **Compression: 10.0:1
  • **Displacement:
  • **Bore x Stroke:
  • **Power: at 7300 rpm
  • **Torque: at 6200 rpm
  • **Redline: 8000 rpm
  • **VTEC engagement: 4500 rpm
  • **IAB engagement: 6000 rpm
  • **Transmission: Y80 - S80
  • **ECU code: P72

B18C3

  • DOHC VTEC
  • Found in:
  • * Honda Civic Asian market,
  • * Honda Integra Asian market,
  • **Power: at 7600 rpm & at 7500 rpm
  • **Compression: 10.8:1
  • **Bore x Stroke:

B18C4

  • DOHC VTEC
  • Found in:
  • *1992–2000 Ballade
  • *1996–2000 UK Civic VTi 5-door Hatch
  • *1996–2000 UK Civic 1.8i VTi-S 5-door Hatch
  • *1996–2001 UK Civic Aerodeck 1.8i VTi 5-door Wagon
  • *1998–1999 EU Civic Aerodeck 1.8i VTi 5-door Wagon
  • *1998–1999 EU Civic 1.8i VTi 5-door Hatch
  • **Displacement:
  • **IAB open at 5750 rpm
  • **VTEC engagement at 4300 rpm
  • **Compression: 10.0:1
  • **Power: at 7600 rpm & at 6200 rpm
  • **Limit: 8400 rpm
  • **Transmission: S9B 4.26 final drive Torsen LSD.
  • **ECU code: 37820-P9K-E11 37820-P9K-G11
  • **bore x stroke:

B18C5 (Type R)

  • DOHC VTEC
  • Found in:
  • *1997-1998, 1999 CDM, 2000-2001 Acura Integra USDM/CDM Type R
  • **Displacement:
  • **Compression: 10.6:1
  • **Bore x Stroke:
  • **Rod Length:
  • **Rod/Stroke Ratio: 1.58
  • **Power: at 7800 rpm & at 7500 rpm
  • **Redline: 8400 rpm
  • **VTEC engagement: 5700 rpm
  • **Transmission: S80 w/LSD

B18C6 (Type R)

  • DOHC VTEC
  • Found in:
  • * 1998–2001 Honda Integra UKDM/EUDM Type R
  • **Displacement:
  • **Compression: 11.1:1
  • **Air intake diameter:
  • **Bore:
  • **Rod Length:
  • **Rod/Stroke Ratio: 1.58
  • **Power: at 7900 rpm & at 7300 rpm
  • **Redline: 8400 rpm
  • **Rev Limit: 8600 rpm
  • **VTEC engagement: 5900 rpm
  • **Transmission: S80 w/LSD
  • **ECU code: 37820-P73-G01

B18C7 (Type R)

  • DOHC VTEC
  • Found in:
  • * 1999-2001 Honda Integra AUDM/NZDM Type R
  • **Displacement:
  • **Compression: 11.1:1
  • **Air intake diameter:
  • **Bore x Stroke:
  • **Rod Length:
  • **Rod/Stroke Ratio: 1.58
  • **Power: at 8200 rpm & at 7500 rpm
  • **Redline: 8400 rpm
  • **Rev Limit: 8800 rpm
  • **VTEC engagement: 5800 rpm

B20

B20B-B20B4

  • 1996–1998 specs
  • non-VTEC
  • *Found in: USDM and JDM Honda CR-V, JDM Orthia, Stepwgn, S-MX
  • **Displacement:
  • **Power: at 5400 rpm
  • **Torque: at 4800 rpm
  • **Rod length:
  • **Compression: B20B4 8.8:1 or 9.2:1
  • **Bore x Stroke:
  • **Redline: 6500 rpm
  • **No Knock Sensor
  • **Low Compression engine

B20B

  • 1999 - 2001 specs
Non VTEC
  • Found in: USDM CR-V as a B20B8, CR-V and Honda Orthia as a B20B
  • Displacement:
  • Power: at 6200 rpm
  • Torque: at 5500 rpm
  • Rod length:
  • Compression: 9.4:1 -9.6:1
  • Bore x Stroke:
  • Head Cylinder : P75-5
  • Redline: 6800 rpm

B20Z2

  • 1999 - 2001 specs
Non-VTEC
  • Found in: USDM CR-V as a B20Z2, CR-V and Honda Orthia as a B20B
  • Displacement:
  • Power: at 6200 rpm
  • Torque: at 5500 rpm
  • Rod length:
  • Compression: 9.4:1 -9.6:1
  • Bore x Stroke:
  • Redline: 6800 rpm
  • Some came with limited production head P8R which had 33mm intake valves vs 31mm intake, and the head had an 84mm shrouding vs 81mm for all other B series heads. They also had a thinner head gasket which yielded a higher compression ratio vs the normal B20B of 9.2:1.

B20B JDM

  • 1995–1997 spec
  • Non-VTEC
  • *Found in: JDM Honda Orthia, CR-V
  • **Displacement:
  • **Power: at 6200 rpm
  • **Torque: at 5200 rpm
  • **Rod length:
  • **Compression: 9.2:1
  • **Bore x stroke:
  • **Redline: 6700 rpm
  • **Rev Limit: 7300 rpm
  • 1998-2002 specs
  • Non-VTEC
  • Displacement:
  • Power: at 6300 rpm
  • Torque: at 4500 rpm
  • Rod length:
  • Compression: 9.6:1
  • Bore x stroke:
  • Redline: 6500 rpm
  • Rev Limit: 7200 rpm
  • Some came with limited production head P8R which had 33mm intake valves vs 31mm intake, and the head had an 84mm shrouding vs 81mm for all other B series heads.
  • Source http://www.honda.co.jp/auto-archive/

B20A/B20B

The B20A3 and B20A5 are the predecessor to the B family. All B-series engines were based from the B20A, but most engine components are not compatible. For more information, refer to the F3-series Honda race car that used a B20A engine. Also see Honda B20A engine.