Honda B20A engine


The Honda B20A engine series, known as the B20A and B21A, was an inline four-cylinder engine family from Honda introduced in 1985 in the second-generation Honda Prelude. Also available in the contemporary third-generation Honda Accord in the Japanese domestic market, along with the Accord-derived Vigor, the B20A was Honda's second line of multivalve DOHC inline four-cylinder engines behind the "ZC" twin-cam variant of the ordinarily SOHC D-series, focused towards performance and displacing 2.0 to 2.1 litres.
The third-generation Prelude was exclusively powered by the B20A engine family and production of the B20A engine family ended with the conclusion of the production of the third-generation Prelude in 1991.

History

The B20A would be succeeded by the Honda B engine family. Although sharing similar nomenclature and some design elements, the earlier B20A substantially differs from the later B-series in architecture enough to be considered two different engine families and is also not to be confused with the B20B, a 2.0 liter DOHC engine introduced alongside the Honda CR-V in 1994.
There were two versions of the B20A:
  • The first generation of B20A engines was available in the 85–87 Prelude 2.0SI in Japan and in Europe, the 86–89 Honda Vigor and Accord. It leaned towards the front of the car just like the A20A engine found in the same cars. This B20A produces and torque in Japan. In Europe this is called B20A1, producing and 127 lb.ft.
  • The second generation of B20A was found in the 87–91 Prelude. The 87–91 Prelude B20A and B21A blocks are cast so they lie at an 18-degree angle leaning towards the firewall. This was done to please the exterior specifications for the 1988–1991 3rd Generation Prelude due to its ultra-low hood line which Honda dubs the "engineless design" and also for handling reasons; placing the engine at an angle gives it a lower center of gravity.
There was also a similar engine named B18A for the 86–89 Accords and Vigors. It was a de-stroked B20A powered by two side-draft Keihin carburetors.
All B20A engines consisted of closed-deck aluminium blocks with thicker-than-average iron sleeves whereas the B21A1 had FRM (fiber reinforced metal) cylinder liners.
The B21A1 was basically a re-worked B20A5 with an increase in bore to. The external block dimensions had to stay identical to the B20A5 block so Honda called upon Saffil to create a thin but strong cylinder liner using FRM (fiber reinforced metal) which consisted of a carbon fiber matrix, aluminium alloy, and aluminium oxide to make a very strong cylinder sleeve. The sleeve is so strong, in fact, that it wears out the piston rings, causing low compression numbers, severe smoking, and high oil usage. It is possible in many situations to merely replace the worn rings in order to revive the motor's former output. Many machine shops will not attempt to re-hone or re-bore the FRM sleeves, as this type of sleeve will de-laminate during machining operations.

B18A

The original B18A is a short-stroked version of the B20A. It is not considered to be part of the modern B-series family, despite sharing its dimensions with the later B18A1.
  • Found in:
  • *1986–1989 Honda Accord Aerodeck LXR-S/LX-S
  • *1986–1989 Honda Accord EXL-S/EX-S
  • *1986–1989 Honda Vigor MXL-S
  • **Displacement:
  • **Compression: 9.7:1
  • **Bore x Stroke:
  • **Dual Keihin carburetors
  • **Power: at 6100 RPM & at 4700 RPM
  • **Transmission: A2N5, E2N5

B20A, B20A1

  • "Honda" logo in center of valve cover – Filler cap on left side of cover.
  • Found in:
  • * Serial numbers 1000001~, 1500001~ and 1550001~
  • ** 1985–1987.03 Honda Prelude Non-U.S.
  • ** 1985.06–1987.04 Honda Accord Non-U.S.
  • ** 1985.06–1987.04 Honda Vigor Non-U.S.
  • * Serial numbers 1600001~ and 1640001~
  • ** 1987.05–1989.08 Honda Accord Non-U.S.
  • ** 1987.05–1989.08 Honda Vigor Non-U.S.
  • Displacement: 1958 cc
  • * bore:
  • * stroke:
  • Compression: 9.4:1
  • Power:
  • * at 6300 rpm & 137 lb.ft at 5000 rpm, using PH3 ECU
  • * at 6200 rpm & 127 lb.ft at 4000 rpm, using PH3 ECU
  • * at 6000 rpm & 127 lb.ft at 4000 rpm, using PJ5, PJ7, PH3 ECU w vac. advance
  • Transmission: B2K5, F2K5
The B20A installed in 1988–1991 Preludes have the following specifications:
  • Found in:
  • * 1987–1991 Honda Prelude 3rd gen Non-U.S.
  • Power: at 6000 rpm
  • Torque: 128tq at 4500 rpm
  • Compression ratio: 9.4:1

B20A2

B20A3

  • Found in:
  • * 1987–1990 Honda Prelude 3rd gen 2.0 S
  • Power: at 5800 rpm with catalytic converter, at 5800 rpm without catalytic converter
  • Torque: at 4000 rpm
  • It was PGM-CARB microprocessor controlled

B20A4

  • Found in: 1987–1991 Honda Prelude 3rd gen Non-U.S.
  • Fuel system: 2 carburetors
  • Displacement : 1958
  • Bore x Stroke : 81 x 95
  • Compression ration: 9.2:1
  • Maximum power: 114 hp at 5800 rpm
  • Maximum torque: 116 ft lb at 4500 rpm
  • Catalytic converter: no
  • ECU: no

B20A5

  • Found in:
  • * 1987–1991 Honda Prelude 3rd gen 2.0Si
  • Power: at 6200 rpm
  • Torque: at 4000 rpm
  • Engine cc: 1958.14
  • Cylinder cc: 489.535
  • Deck cc: 13.885
  • Head cc: 47.3
  • Compression Ratio: 9.0:1

B20A6

at 6000 rpm
174 Nm at 4500 rpm
KY model is one of them

B20A7

B20A8

  • Found in:
  • * 1987–1991 Honda Prelude 3rd gen Non-U.S. Russian, Swedish Domestic Market
  • * 1988–1989 Honda Accord Non-U.S.
  • Power at 6000 rpm

B20A9

  • Found in:
  • * 1990–1991 Honda Prelude 3rd gen Non-U.S. Finland, Germany, Norway, Netherlands, Russia, Argentina
  • Power at 6000 rpm
  • Torque 129tq at 4500 rpm
  • Cylinder cc: 489.535
  • Deck cc: 13.885
  • Head cc: 47.3
  • Compression ratio 9,3:1

B21A

  • Found in:
  • * 1990–1991 Honda Prelude 3rd gen Si States
  • Very rare, it was only produced for the "Si States" models in Japan
  • Power:
  • Torque: 186 N·m
  • Compression Ratio: 9.4:1
engine using a pk-3 honda ECU

B21A1

  • Found in:
  • * 1990–1991 Honda Prelude 3rd gen SI USDM
  • * 1990–1991 Honda Prelude 3rd gen SR Canadian Market
  • Power: at 5800 rpm
  • Torque: at 5000 rpm
  • Engine cc: 2056.03
  • Bore 83 mm
  • Stroke 95 mm
  • Cylinder cc: 514.0075
  • Deck cc: 10.191
  • Head cc: 51.0
  • Compression Ratio: 9.4:1