Han purple and Han blue
Han purple and Han blue are synthetic barium copper silicate pigments developed in China and used in ancient and imperial China from the Western Zhou period until the end of the Han dynasty.
Color
was the only natural blue pigment used in early China. Early China seems not to have used a natural purple pigment and was the first to develop a synthetic one.Han blue in its pure form is, as the name suggests, blue.
Han purple in its pure form is actually a dark blue, that is close to indigo. It is a purple in the way the term is used in colloquial English, i.e., it is a color between red and blue. It is not, however, a purple in the way the term is used in color science, i.e. a nonspectral color between red and violet on the 'line of purples' on the CIE chromaticity diagram. Perhaps the most accurate designation for the color would be to call it 'Han indigo', although it could also be regarded as a bright shade of ultramarine.
The purple color seen in samples of Han purple is created by the presence of red copper oxide which is formed when Han purple decomposes. The decomposition of Han purple to form copper oxide is
Above 1050 °C, the CuO copper oxide breaks down to copper oxide:
Chemistry
Both Han purple and Han blue are barium copper silicates. However, they differ in their formula, structure, and chemical properties.Chemical formula and molecular structure
Han purple
Han purple has the chemical formula BaCuSi2O6.Han purple has a layered structure with isolated 4-ring silicates, and contains a copper-copper bond which makes the compound more unstable than Han blue.
Han blue
Han blue has the chemical formula BaCuSi4O10. In 1993, it was discovered to occur naturally as the rare mineral effenbergerite.Han blue, like Han purple, has a layered structure with silicate forming the structural framework. However, Han blue is more stable because of structural features such as
- It is more silica-rich.
- Each four-ring silicate is linked to four others in the adjacent level, in a zig-zag pattern.
- The copper ions are very strongly contained within the stable silicate structure.
Chemical and physical properties
Exotic properties and applications to superconductivity and quantum computing research
In 2006 scientists at Stanford, Los Alamos National Laboratory and the Institute for Solid State Physics, showed that Han purple "loses a dimension" under suitable conditions when it enters a new state, as a Bose-Einstein Condensate. The researchers noted that"We have shown, for the first time, that the collective behavior in a bulk three-dimensional material can actually occur in just two dimensions. Low dimensionality is a key ingredient in many exotic theories that purport to account for various poorly understood phenomena, including high-temperature superconductivity, but until now there were no clear examples of 'dimensional reduction' in real materials," said Ian Fisher
Other research team members alluded to potential applications to quantum computing. In conventional computers, electron charges transport information, but electron spin might in the future play a similar role in "spintronic" devices:
"Spin currents are capable of carrying far more information than a conventional charge current—which makes them the ideal vehicle for information transport in future applications such as quantum computing," stated first author Suchitra Sebastian. Noted Fisher: "Our research group focuses on new materials with unconventional magnetic and electronic properties. Han Purple was first synthesized over 2,500 years ago, but we have only recently discovered how exotic its magnetic behavior is. It makes you wonder what other materials are out there that we haven't yet even begun to explore."
Han purple
Han purple is chemically and thermally less stable than Han blue. It fades and decomposes in dilute acid. Han purple starts to decompose at temperatures more than 1050–1100 °C and forms a green-black glass at around 1200°C. It becomes more purplish when ground.Han blue
Han blue is more chemically and thermally stable. It does not break down in dilute acids, and becomes more bluish when ground.Manufacture
Manufacturing depends on the raw materials, their ratios, fluxes, temperature, atmosphere, and reaction time.Production seems to have been focused in northern China, around north of the city of Xi'an. This is the area with large deposits of raw materials. No written records have been found about the production of Han purple or Han blue, so information about manufacture has been achieved through experimentation.
Raw materials
The raw materials needed are a barium mineral, quartz, a copper mineral, and a lead salt. It is unknown whether minerals were used in their natural form or were treated, though no evidence exists as yet of treatment.The barium source was either witherite or baryte. The rarity of witherite may favor baryte as the most likely source. Baryte has a slower decomposition rate and so favors Han blue production. Witherite conversely favors Han purple. In the use of baryte, lead salts would have been needed to increase yield. Lead has been detected in association with Han purple and Han blue.
Lead acts as a catalyst in the decomposition of barium minerals and as a flux. The amount of lead is important. Too much lead causes partial melting and glass formation above 1000 °C.
The role of lead is:
The manufacturing process
The preparation of Han blue using malachite, silica and witherite as raw minerals also releases carbon dioxide and water vapor as by-products according to the following reaction:The solid-state reaction to produce barium copper silicates starts at roughly 900 °C. Han purple is formed fastest. Han blue forms when an excess of silica is present and a longer reaction time is allowed. Early Chinese manufacture generally produced a mixture of Han blue and Han purple particles in various ratios, but pure colors were sometimes manufactured. Han blue could have been brought to a melt, but Han purple does not form a homogeneous melt, so it would have had to use a sintering process.
Prolonged firing causes Han purple to break down and form Han blue:
The temperature needed to be high and kept at that temperature for long periods. Han purple is thermally sensitive, so temperature control for producing Han purple needed to be fairly constant. Han blue is thermally less sensitive.
Under the right conditions, the manufacture of Han purple would have taken around 10–24 hours, while Han blue would have taken twice as long.
Temperature would have been controlled by testing of firing materials, the size, shape, and material of the kiln, and the control of the environment. Technology for achieving and maintaining high temperatures would have been known from metal and ceramic production e.g. the potential use of twin bellows as used in metal production.
Comparison
| Characteristics | Han purple | Han blue |
| Chemical formula | BaCuSi2O6 | BaCuSi4O10 |
| Minimum temperature for production | 900 – 1000 °C | circa 1000 °C |
| Manufacture time | 10 – 24 hours | 20 – 48 hours |
| Decomposition temperature | 1050 – 1100 °C | >1200 °C |
| Thermally stable? | No | Yes |
| Stable in acid? | No | Yes |
| Color increase when ground? | Yes | Yes |
History
Hypothesis on origin
Han blue and Egyptian blue have the same basic structure and have very similar properties. The main difference is that Egyptian blue has calcium in the position of Han blue's barium. The similarity led some to suggest that Han blue was based on Egyptian blue knowledge, which had traveled east along the Silk Road. Independent innovation in China would still have been needed to replace calcium with barium.The two hypotheses underlying the speculations about the exact chronology of the invention of these blue pigments can be summarized as follows:
- That earlier alkali metal glazing techniques were based on knowledge from Egypt, but that the copper silicate pigments developed from these glazes in two independent areas: Egypt and China.
- Alternatively, that examples of Han blue predate the official Silk Road and therefore that development was completely independent.
Chinese invention
The use of quartz, barium, and lead components in ancient Chinese glass and Han purple and Han blue has been used to suggest a connection between glassmaking and the manufacture of pigments, and to argue for independent Chinese invention. Taoist alchemists may have developed Han purple from their knowledge of glassmaking.
The lead is used by pigment maker to lower the melting point of the barium in Han Purple.
The increase and decrease of barium glasses, and Han purple and Han blue, follow similar patterns. Both peaked in the Han dynasty, declining afterwards. Pre-Han to Tang dynasties see a shift from lead-barium-silicate type glass to lead-soda-lime glass. The reason for decline is debatable. Liu et al. attribute the decline to the decline of Taoism when Confucianism was introduced, since they link pigment manufacture to the ideology of Taoism. Berke believes that political changes stopped the distribution of the pigments as the Chinese Empire was split at the end of the Han period.