General Electric T58


The General Electric T58 is an American turboshaft engine developed for helicopter use. First run in 1955, it remained in production until 1984, by which time some 6,300 units had been built. On July 1, 1959, it became the first turbine engine to gain FAA certification for civil helicopter use. The engine was license-built and further developed by de Havilland in the UK as the Gnome, in the West Germany by Klöckner-Humboldt-Deutz, and also manufactured by Alfa Romeo and the IHI Corporation.

Design and development

Development commenced with a 1953 US Navy requirement for a helicopter turboshaft to weigh under 400 lb while delivering 800 hp. The engine General Electric eventually built weighed only 250 lb and delivered 1,050 hp and was soon ordered into production. First flight was on a modified Sikorsky HSS-1 in 1957, and civil certification for the CT58-100 variant was obtained two years later.
A number of unusual features are incorporated into the T58:
  • an all-axial compressor. Most other turboshafts in this power bracket have a centrifugal unit as a final compressor stage. As a result, the blades at the rear of the compressor are very small and extremely thin.
  • compressor handling at part speed is facilitated by several rows of variable pitch stators at the front part of the unit. This was a fairly novel feature when the engine was first introduced.
  • a single stage power turbine. which delivers power to the rear of the engine. The hot exhaust stream is diverted sideways, away from the output shaft.
  • the combustor is a straight-through annular design, rather than reverse flow.
The main production version of the engine was the T58-GE-10, developing 1,400 hp. The most powerful version, the T58-GE-16, produces 1,870 hp.

Variants

;T58-GE-1:
;T58-GE-2:
;T58-GE-3:
;T58-GE-4:
;T58-GE-5:
;T58-GE-6:
;T58-GE-8B:
;T58-GE-8E:
;T58-GE-8F:
;T58-GE-10:
;T58-GE-14: 2-stage power turbine
;T58-GE-16:
;T58-GE-100:
;T58-GE-402:
;CT58-100-1:
;CT58-110-1:
;CT58-140-1: commercial T58-GE-10
;Ishikawajima-Harima CT58-IHI-110-1:
;Ishikawajima-Harima CT58-IHI-140-1:
;Ishikawajima-Harima T58-IHI-8B BLC:Variant used in the Shin Meiwa PS-1's boundary layer control system
;Rolls-Royce Gnome:Licensed production and development of the T58 in the United Kingdom.

Applications

Other

Two T58s, converted to turbojets by the removal of the power turbines, were used as the engines on the Maverick TwinJet 1200.
The Carroll Shelby turbine cars entered in the 1968 Indianapolis 500 race were powered by T58s. The cars were found to be using variable inlets to get around the USAC regulations on the maximum allowable inlet size and were disqualified.

Engines on display