Fe FET
A ferroelectric field-effect transistor is a type of field-effect transistor that includes a ferroelectric material sandwiched between the gate electrode and source-drain conduction region of the device. Permanent electrical field polarisation in the ferroelectric causes this type of device to retain the transistor's state in the absence of any electrical bias.
FeFET based devices are used in FeFET memory – a type of single transistor non-volatile memory.
Description
In 1955, Ian Munro Ross filed a patent for a FeFET or MFSFET. Its structure was like that of a modern inversion channel MOSFET, but ferroelectric material was used as a dielectric/insulator instead of oxide. Use of a ferroelectric in a solid state memory was proposed by Moll and Tarui in 1963 using a thin film transistor. Further research occurred in the 1960s, but the retention characteristics of the thin film based devices was unsatisfactory. Early field effect transistor based devices used bismuth titanate ferroelectric, or Pb1−xLnxTiO3 and related mixed zirconate/titanates. In the late 1980 Ferroelectric RAM was developed, using a ferroelectric thin film as capacitor, connected to an addressing FET.FeFET based memory devices are read using voltages below the coercive voltage for the ferroelectric.
Issues involved in realising a practical FeFET memory device include : choice of a high permitivity, highly insulating layer between ferroelectric and gate; issues with high remanent polarisation of ferroelectrics; limited retention time.
Provided the ferroelectric layer can be scaled accordingly FeFET based memory devices are expected to scale as well as MOSFET devices; however a limit of ~20 nm laterally may exist. Other challenges to feature shrinks include : reduced film thickness causing additional polarisation effects; charge injection; and leakage currents.
Research and development
In 2017 FeFET based non-volatile memory was reported as having been built at 22nm node using FDSOI CMOS with hafnium dioxide as the ferroelectric- the smallest FeFET cell size reported was 0.025 μm2, the devices were built as 32Mbit arrays, using set/reset pulses of ~10ns duration at 4.2V - the devices showed endurance of 105 cycles and data retention up to 300C.the startup Ferroelectric Memory Company is attempting to develop FeFET memory into a commercial device, based on hafnium dioxide. The company's technology is claimed to scale to modern process node sizes, and to integrate with contemporary production processes, i.e. HKMG, and is easily integrable into conventional CMOS processes, requiring only two additional masks.