Czech Hiking Markers System


The Czech Hiking Markers Standard is an international system of hiking markers for tourist trails, used in more countries than any competing standard. The signs and markers can be used in both wilderness and cities. They are internationally well understandable as they grow from the same tradition in other Central European countries. Similar signs are in use in Austria, Germany, Poland and Switzerland.

Basic hiking markers

The trail usually starts with arrow signs with names of destinations and number of kilometres marked. Each trail is then colour marked by simple markers and arrows painted between white lines on fixed objects along the trail in a colour given to a specific trail. The paint is chosen so that it does not impact on the surrounding environment.
Basic implementation of the system requires only a color paint and a brush, with which an entire country can be marked.
Nevertheless, many other also very modern features can be added using GPS and mobile phone applications.

Additional features

The basic system of trails with markers painted along the trail can be complemented by other features. These additional features are not necessary for the basic functioning of the system though.Information boards along the trail, giving information about the trail and its difficulty, nature protection, monuments, animals and trees along the trail. Logos of the supervising institution can be shown.Printed maps with coloured lines showing the trails. GPS information on each trail, board or signMobile phone application with a map and site descriptions contains additional information about the trail difficulty, slope inclination, gives the opportunity of hike planning and features that would not be possible on the signs etc.

Usage and extent

This method of trail blazing has a wide international usage in most of Central and Eastern Europe, with showcase examples also in parts of Latin America and Asia.
The system has been used by the Czech Hiking Club since 1888. The entire territory of the Czech Republic is covered with marked trails, and detailed maps are published and widely available. In the Czech Republic, over 70,000 km of hiking trails have been marked in this way. Of these, 39,816 km of hiking trails were marked in 2008. An additional 31,104 km of cycling trails, 387 km of skiing trails, and 1300 km of horse riding trails are also marked. In 1938 it was the longest system in the world, but now it is the densest network according to Czechs, though Switzerland has about twice as dense trail system
Maps of the trails have also been made into a number of digital applications - both Apple and Android for mobile phones, on Google Maps, and on the Czech "Mapy.com".

Czech Markers standard

This system uses three bars - usually one colour in between two white bars, with different meanings attached to different colours:red indicates the most difficult or summit trails;blue for significant trails;green for shorter local trails;yellow for short interconnecting trails.
These marks may be posted on wooden boards or metallic plates.
Basic trail markers are square, 10x10 cm in size. The volunteers marking these trails usually prepare sheet metal or cardboard matrices to keep the signs uniform in size.
Any change of direction is marked with arrows of the same colour and similar design. There are also symbols for short side-trails and for the end of the trail.
The system is usually supplemented by maps, which show the trails as lines in corresponding colours. Nevertheless, maps are not necessary for the system to function, as walkers can simply follow the trail from marker to marker.

Czech Markers around the world

Due to the relative ease of use and low cost, the system has spread to many other countries, often by Czech people. Originally used in the Czech Republic, the system spread through Central Europe and Eastern Europe and even to countries outside Europe. Nearly identical systems exist in the neighbouring countries of Austria and Poland.