Yo-yo
A yo-yo is a toy consisting of an axle connected to two disks, and a string looped around the axle, similar to a spool. It is an ancient toy documented since 440 BC. It was also called a bandalore in the 18th century.
It is played by holding the free end of the string known as the handle, allowing gravity to spin the yo-yo and unwind the string. The player then allows the yo-yo to wind itself back to the player's hand, exploiting its spin. This is often called "yo-yoing" or "playing yo-yo".
In the simplest play, the string is intended to be wound on the spool by hand; the yo-yo is thrown downward, hits the end of the string then winds up the string toward the hand, and finally the yo-yo is grabbed, ready to be thrown again. One of the most basic tricks is called the sleeper, where the yo-yo spins at the end of the string for a noticeable amount of time before returning to the hand.
Etymology and history
Yo-yos were known to the Ancient Greeks, and they appear in several Ancient Greek vase paintings, though the Ancient Greek word for them is unknown. Surviving examples from the period exist made of bronze and terra cotta, though the most common material was likely wood.A Mughal painting from around 1770 shows the use of a string toy that is similar, but not identical, to the modern yo-yo.
Yo-yos were popular in England around the end of the eighteenth century, where they were commonly called bandalores or bandylores.
The word yo-yo probably comes from the Ilocano term yóyo, or a cognate word from the Philippines.
First yo-yo company
In 1928, Pedro Flores, a Filipino immigrant to the United States, opened the Yo-yo Manufacturing Company in Santa Barbara, California. The business started with a dozen handmade toys; by November 1929, Flores was operating two additional factories in Los Angeles and Hollywood, which all together employed 600 workers and produced 300,000 units daily.The principal distinction between the Filipino design popularized by Flores and the more traditional yo-yos is in the way the yo-yo is strung. In older yo-yo designs, the string is tied to the axle using a knot. With this technique, the yo-yo just goes back and forth; it returns easily, but it is impossible to make it sleep. In Flores's design, one continuous piece of string, double the desired length, is twisted around something to produce a loop at one end which is fitted around the axle. Also termed a looped slip-string, this seemingly minor modification allows for a far greater variety and sophistication of motion, thanks to increased stability and suspension of movement during free spin.
Shortly thereafter, entrepreneur Donald F. Duncan recognized the potential of this new fad and purchased the Flores Yo-yo Corporation and all its assets, including the Flores name, which was transferred to the new company in 1932.
The name "Yo-yo" was registered in 1932 as a trademark by in Vancouver, Canada, and remains a trademark in that country. Harvey Lowe won the first World Yo-Yo Contest in London, England. In 1932, Swedish Kalmartrissan yo-yos started to be manufactured as well.
In 1933, yo-yos were banned in Syria, because many locals superstitiously blamed the use of them for a severe drought.
In 1946, the Duncan Toys Company opened a yo-yo factory in Luck, Wisconsin. The Duncan yo-yo was inducted into the National Toy Hall of Fame at The Strong in Rochester, New York, in 1999.
1960s resurgence
Declining sales after World War II prompted Duncan to launch a comeback campaign for his trademarked "Yo-Yo" in 1962 with a series of television advertisements.In a trademark case in 1965, a federal court of appeal ruled in favor of the Royal Tops Company, determining that yo-yo had become a part of common speech and that Duncan no longer had exclusive rights to the term. As a result of the expenses incurred by this legal battle as well as other financial pressures, the Duncan family sold the company name and associated trademarks in 1968 to Flambeau, Inc, which had manufactured Duncan's plastic models since 1955., Flambeau Plastics continued to run the company.
Rise of the ball bearing
As popularity spread through the 1970s and 1980s, there were a number of innovations in yo-yo technology, primarily regarding the connection between the string and the axle. In 1979, dentist and yo-yo celebrity Tom Kuhn patented the "No Jive 3-in-1" yo-yo, creating the world's first "take-apart" yo-yo, which enabled yo-yo players to change the axle.Swedish bearing company SKF briefly manufactured novelty yo-yos with ball bearings in 1984. In 1990, Kuhn introduced the SB-2 yo-yo that had an aluminum transaxle, making it the first successful ball-bearing yo-yo. The SB2 was originally offered only in a natural silver color, but as time went on, it became available in many different colors, with various decorative embellishments.
In all transaxle yo-yos, ball bearings significantly reduce friction when the yo-yo is spinning, enabling longer and more complex tricks. Subsequent yo-yo players used this ability to their advantage, creating new tricks that had not been possible with fixed-axle designs.
There are many new types of ball bearings in the market which deviate from the original design and/or material of the standard stainless steel ball bearing. For example, a certain type of bearing has an inward facing curved surface, to prevent the string from rubbing on the sides of the yo-yo, which would cause unwanted friction when performing intricate string tricks. Other manufacturers replicate this with a similar inwardly curved surface, but use minor modifications. Some high-end bearings use ceramic composites in the balls of the bearing, to reduce internal friction, again making for a smoother spinning yo-yo. Precious materials such as ruby have also been used as a material in prototype ball bearings for its properties such as extreme hardness. The material was first tested in a prototype bearing made by Wolf Yoyo Works in May 2018.
Modern yo-yo
The era following the yo-yo boom of the late 1990s is often referred to as the "modern" era of yo-yo. The modern era of yo-yo is characterized by markedly more complicated and sophisticated yo-yo techniques than came before in addition to a plethora of different yo-yo designs created to serve various niche purposes. This increased complexity of yo-yo play was allowed by the introduction of the ball-bearing technology to yo-yos, which enabled yo-yos to spin much longer than was previously possible. This, in addition to the advent of the bind technique and unresponsive yo-yoing equipped yo-yo players with an essentially limitless amount of freedom, with which they were able to create myriad yo-yo tricks and techniques.In the wake of this revolution that took place in yo-yo, a landscape of yo-yo competitions tailored towards this modern style of yo-yo play emerged. One example of such competitions is the World Yo-Yo Contest. Outside of the competition scene, yo-yo players regularly share videos of their yo-yo tricks on the Internet; a common place players do so is on Instagram, using the hashtag "#trickcircle". Some yo-yo players have also found modest success outside the yo-yo community, going viral on TikTok, gaining significant YouTube followings, or being featured guests on television programs.
Techniques
Sleeping
The sleeper is one of the most common yo-yo throws and is the basis for nearly all yo-yo throws other than [|looping]. Keeping a yo-yo spinning while remaining at the end of its uncoiled string is known as sleeping. While the yo-yo is in the "sleeping" state at the end of the string, one can then execute tricks like "walk the dog", "the elevator", "around the world", or the slightly more complex "rock the baby".The essence of the throw is that one throws the yo-yo with a very pronounced wrist action so that when the yo-yo reaches the end of the string it spins in place rather than rolling back up the string to the thrower's hand. Most modern yo-yos have a transaxle or ball bearing to assist this, but if it is a fixed axle yo-yo, the tension must be loose enough to allow this. The two main ways to do this are, allow the yo-yo to sit at the bottom of the string to unwind, or perform lariat or UFO to loosen the tension. When one decides to end the "sleeping" state, one merely jerks the wrist and the yo-yo "catches" the string and rolls back up to the hand. Ball-bearing yo-yos with a "butterfly" shape, primarily used for string tricks, frequently have a low response or are completely unresponsive, requiring a "bind" for the yo-yo to return.
In competition, mastery of sleeping is the basis for the 1A division. Inexpensive fixed-axle yo-yos usually spin between 10 and 20 seconds, while the expensive ball bearing yo-yos can spin about 1–4 minutes depending on the throw., the world record sleep times were 3:51.54 minutes for fixed-axle and 21:15.17 minutes for transaxle yo-yos. In 2012, the transaxle yo-yo sleep time record was broken by the C3YoyoDesign BTH, with a time of 30:28.30 minutes. A traditional sleeper throw is employed to start frontstyle combinations, whereas a sideways sleeper, or "breakaway" is used to start sidestyle combinations.
Mounts, transitions, and dismounts
Yo-yo tricks in which the yo-yo comes to be sitting a string are called mounts. Transitions are employed to move from one mount to another. Frontstyle mounts include the under and over mounts, as well as the split bottom mount. Sidestyle mounts include the man on the flying trapeze. Combinations can be produced by transitioning from one mount to another in various ways.Combinations which can repeat indefinitely are called "repeaters".
Loops and regens
Loops are yoyo tricks that consist of the yoyo looping around the throw hand.A certain class of looping tricks, regens, are tricks that add spin to a yoyo without having to return it to the throwing hand. Because regens switch between frontstyle and sidestyle, they are frequently used to transition between frontstyle and sidestyle combinations.