Brock Avion
The Brock Avion is an American ultralight aircraft that was designed and produced by Ken Brock Manufacturing, a company usually noted for its gyroplanes. The Avion was supplied as a kit for amateur construction.
Design and development
The aircraft was designed to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of. The Avion has a standard empty weight of. The Avion features a strut-braced high-wing, single-seat, open cockpit, single pusher engine configuration, and is equipped with tricycle landing gear.The aircraft is made from bolted together aluminum tubing, with the wing ribs constructed from stamped aluminum. The wing and tail covering is Dacron sailcloth. Its span wing is supported by "V" lift struts. The tail is mounted to a straight aluminum tube that passes above the pusher propeller. Both the elevator and rudder are all-flying surfaces; the ailerons are full-span. The standard engine fitted was the Rotax 277 of. The fuel tank was integral with the pilot's seat and common with Brock's gyroplane designs. The pilot sits on the seat in the open air, with no windshield. The landing gear is of tricycle configuration and features a steerable nosewheel and hydraulic brakes. The Avion can be assembled for flight in 30 minutes.
The Avion underwent a complete engineering stress analysis by Bob Hovey, the designer of the Hovey Delta Bird and Hovey Whing Ding II. The Avion was designed to +6/-4g.