Bismuth
Bismuth is a chemical element; it has symbol Bi and atomic number 83. It is a post-transition metal and one of the pnictogens, with chemical properties resembling its lighter group 15 siblings arsenic and antimony. Elemental bismuth occurs naturally, and its sulfide and oxide forms are important commercial ores. The free element is 86% as dense as lead. It is a brittle metal with a silvery-white color when freshly produced. Surface oxidation generally gives samples of the metal a somewhat rosy cast. Further oxidation under heat can give bismuth a vividly iridescent appearance due to thin-film interference. Bismuth is both the most diamagnetic element and one of the least thermally conductive metals known.
Bismuth was formerly understood to be the element with the highest atomic mass whose nuclei do not spontaneously decay. However, in 2003 it was found to be very slightly radioactive. The metal's only primordial isotope, bismuth-209, undergoes alpha decay with a half-life roughly a billion times longer than the estimated age of the universe.
Bismuth metal has been known since ancient times. Before modern analytical methods bismuth's metallurgical similarities to lead and tin often led it to be confused with those metals. The etymology of "bismuth" is uncertain. The name may come from mid-sixteenth-century Neo-Latin translations of the German words weiße Masse or Wismuth, meaning 'white mass', which were rendered as bisemutum or bisemutium.
Bismuth compounds account for about half the global production of bismuth. They are used in cosmetics, pigments, and a few pharmaceuticals, notably bismuth subsalicylate, used to treat diarrhea. Bismuth's unusual propensity to expand as it solidifies is responsible for some of its uses, as in the casting of printing type. Bismuth, when in its elemental form, has unusually low toxicity for a heavy metal. As the toxicity of lead and the cost of its environmental remediation became more apparent during the 20th century, suitable bismuth alloys have gained popularity as replacements for lead. Presently, around a third of global bismuth production is dedicated to needs formerly met by lead.
History and etymology
Bismuth metal has been known since ancient times. It was one of the first 10 metals to have been discovered. The name bismuth dates to around 1665 and is of uncertain etymology. The name possibly comes from obsolete German Bismuth, Wismut, Wissmuth, perhaps related to Old High German hwiz. The Neo-Latin bisemutium is from the German Wismuth, itself perhaps from weiße Masse, meaning "white mass".The element was confused in early times with tin and lead because of its resemblance to those elements. Because bismuth has been known since ancient times, no one person is credited with its discovery. Agricola states that bismuth is a distinct metal in a family of metals including tin and lead. This was based on observation of the metals and their physical properties. Miners in the age of alchemy also gave bismuth the name tectum argenti, or "silver being made" in the sense of silver still in the process of being formed within the Earth. Bismuth was also known to the Incas and used in a special bronze alloy for knives.
Beginning with Johann Heinrich Pott in 1738, Carl Wilhelm Scheele, and Torbern Olof Bergman, the distinctness of lead and bismuth became clear, and Claude François Geoffroy demonstrated in 1753 that this metal is distinct from lead and tin.
Characteristics
Physical characteristics
Bismuth is a brittle metal with a dark, silver-pink hue, often with an iridescent oxide tarnish showing many colors from yellow to blue. The spiral, stair-stepped structure of bismuth crystals is the result of a higher growth rate around the outside edges than on the inside edges. The variations in the thickness of the oxide layer that forms on the surface of the crystal cause different wavelengths of light to interfere upon reflection, thus displaying a rainbow of colors. When burned in oxygen, bismuth burns with a blue flame and its oxide forms yellow fumes. Its toxicity is much lower than that of its neighbors in the periodic table, such as lead and antimony.No other metal is verified to be more naturally diamagnetic than bismuth. Of any metal, it has one of the lowest values of thermal conductivity and the highest Hall coefficient. It has a high electrical resistivity. When deposited in sufficiently thin layers on a substrate, bismuth is a semiconductor, despite being a post-transition metal. Elemental bismuth is denser in the liquid phase than the solid, a characteristic it shares with germanium, silicon, and gallium. Bismuth expands 3.32% on solidification; therefore, it was long a component of low-melting typesetting alloys, where it compensated for the contraction of the other alloying components to form almost isostatic bismuth-lead eutectic alloys.
Though virtually unseen in nature, high-purity bismuth can form distinctive, colorful hopper crystals. It is relatively nontoxic and has a low melting point just above, so crystals may be grown using a household stove, although the resulting crystals will tend to be of lower quality than lab-grown crystals.
At ambient conditions, bismuth shares the same layered structure as the metallic forms of arsenic and antimony, crystallizing in the rhombohedral lattice. When compressed at room temperature, this Bi–I structure changes first to the monoclinic Bi-II at 2.55 GPa, then to the tetragonal Bi-III at 2.7 GPa, and finally to the body-centered cubic Bi-V at 7.7 GPa. The corresponding transitions can be monitored via changes in electrical conductivity; they are rather reproducible and abrupt and are therefore used for calibration of high-pressure equipment.
Chemical characteristics
Bismuth is stable to both dry and moist air at ordinary temperatures. At sufficiently high temperatures, it can react with water vapor to make bismuth oxide.It reacts with fluorine to form bismuth(V) fluoride at or bismuth(III) fluoride at lower temperatures ; with other halogens it yields only bismuth halides. The trihalides are corrosive and easily react with moisture, forming oxyhalides with the formula BiOX.
Bismuth dissolves in concentrated sulfuric acid to make bismuth sulfate and sulfur dioxide.
It reacts with nitric acid to make bismuth(III) nitrate.
It also dissolves in hydrochloric acid, but only with oxygen present.
Isotopes
The only primordial isotope of bismuth, bismuth-209, had long been regarded as the heaviest stable nuclide, but was suspected on theoretical grounds to be unstable to alpha decay. This was finally demonstrated in 2003, when researchers at the Institut d'astrophysique spatiale in Orsay, France, detected this decay; the best value of the half-life is now, over times longer than the estimated age of the universe. Due to its hugely long half-life, for all known medical and industrial applications, bismuth can be treated as stable. The radioactivity is of academic interest because bismuth is one of a few elements whose radioactivity was suspected and theoretically predicted before being detected in the laboratory. Bismuth has the longest known α-decay half-life, though tellurium-128 has the longest known by any mode: double beta decay at about.Six isotopes of bismuth with short half-lives occur in the natural radioactive decay chains of actinium, radium, thorium, and neptunium; and more have been synthesized.
For medical use, bismuth-213 can be produced, as the parent isotope actinium-225, by bombarding radium with bremsstrahlung photons from a linear particle accelerator. In 1997, an antibody conjugate with bismuth-213 was used to treat leukemia patients, and it has been used in other cancer treatment, for example, in the targeted alpha therapy experimental program.
Chemical compounds
Chemically, bismuth resembles arsenic and antimony, but is much less toxic. In almost all known compounds, bismuth has oxidation state +3; a few have states +5 or −3.The trioxide and trisulfide can both be made from the elements, although the trioxide is extremely corrosive at high temperatures. The pentoxide is not stable at room temperature, and will evolve [oxygen|] gas if heated. Both oxides form complex anions, and NaBiO3 is a strong oxidising agent. The trisulfide is common in bismuth ore.
Similarly, bismuth forms all possible trihalides, but the only pentahalide is. All are Lewis acids. Bismuth forms several formally- halides; these are complex salts with unusually structured polyatomic cations and anions.
In strongly acidic aqueous solution, the ion solvates to form. As pH increases, the cations polymerize until the octahedral bismuthyl complex, often abbreviated. Although bismuth oxychloride and bismuth oxynitrate have stoichiometries suggesting the ion, they are double salts instead. Bismuth nitrate hydrolysys in water, forming oxynitrate.
Bismuth forms very few stable bismuthides, intermetallic compounds in which it attains oxidation state −3. The hydride spontaneously decomposes at room temperature and stabilizes only below. Sodium bismuthide has interest as a topological Dirac insulator.
Occurrence and production
Production
The reported abundance of bismuth in the Earth's crust varies significantly by source from 180ppb to 8ppb. The most important ores of bismuth are bismuthinite and bismite. Native bismuth is known from Australia, Bolivia, and China.| Country | Production | Year |
| World | 16,000 | 2024 |
 ChinaPriceThe price for pure bismuth metal was relatively stable through most of the 20th century, except for a spike in the 1970s. Bismuth has always been produced mainly as a byproduct of lead refining, and thus the price usually reflected the cost of recovery and the balance between production and demand.Before World War II, demand for bismuth was small and mainly pharmaceutical—bismuth compounds were used to treat such conditions as digestive disorders, sexually transmitted diseases and burns. Minor amounts of bismuth metal were consumed in fusible alloys for fire sprinkler systems and fuse wire. During World War II bismuth was considered a strategic material, used for solders, fusible alloys, medications and atomic research. To stabilize the market, the producers set the price at $1.25 per pound during the war and at $2.25 per pound from 1950 until 1964. In the early 1970s, the price rose rapidly due to increasing demand for bismuth as a metallurgical additive to aluminium, iron and steel. This was followed by a decline owing to increased world production, stabilized consumption, and the recessions of 1980 and 1981–1982. In 1984, the price began to climb as consumption increased worldwide, especially in the United States and Japan. In the early 1990s, research began on the evaluation of bismuth as a nontoxic replacement for lead in ceramic glazes, fishing sinkers, food-processing equipment, free-machining brasses for plumbing applications, lubricating greases, and shot for waterfowl hunting. Growth in these areas remained slow during the middle 1990s, in spite of the backing of lead replacement by the United States federal government, but intensified around 2005. This resulted in a rapid and continuing increase in price. RecyclingMost bismuth is produced as a byproduct of other metal-extraction processes including the smelting of lead, and also of tungsten and copper. Its sustainability is dependent on increased recycling, which is problematic.It was once believed that bismuth could be practically recycled from the soldered joints in electronic equipment. Recent efficiencies in solder application in electronics mean there is substantially less solder deposited, and thus less to recycle. While recovering the silver from silver-bearing solder may remain economic, recovering bismuth is substantially less so. Dispersed bismuth is used in certain stomach medicines, paints, pearlescent cosmetics, and bismuth-containing bullets. Recycling bismuth from these uses is impractical. ApplicationsBismuth has few commercial applications, and those applications that use it generally require small quantities relative to other raw materials. In the United States, for example, 733 tonnes of bismuth were consumed in 2016, of which 70% went into chemicals and 11% into bismuth alloys.In the early 1990s, researchers began to evaluate bismuth as a nontoxic replacement for lead in various applications. MedicinesBismuth is an ingredient in some pharmaceuticals, although the use of some of these substances is declining.
Cosmetics and pigmentsBismuth oxychloride is sometimes used in cosmetics, as a pigment in paint for eye shadows, hair sprays and nail polishes. This compound is found as the mineral bismoclite and in crystal form contains layers of atoms that refract light chromatically, resulting in an iridescent appearance similar to nacre of pearl. It was used as a cosmetic in ancient Egypt and in many places since. Bismuth white can refer to either bismuth oxychloride or bismuth oxynitrate, when used as a white pigment. Bismuth vanadate is used as a light-stable non-reactive paint pigment, often as a replacement for the more toxic cadmium sulfide yellow and orange-yellow pigments. The most common variety in artists' paints is a lemon yellow, visually indistinguishable from its cadmium-containing alternative.ElectronicsTransistorsBismuth-based transistors have been claimed to enable smaller, faster, and more energy-efficient transistors than traditional silicon. Bismuth offers a small bandgap and high electron mobility. It has topological insulator states, conducting along its surface/edges while still insulating internally. Two-dimensional semiconductor materials can be produced from it, enabling thinner and higher-performance devices. Such 2D bismuth materials support sub-nanometer channel lengths, surpassing silicon's practical limits. However, bismuth's anisotropic heat transport can complicate chip design.Bismuth telluride has been investigated for use in thermoelectric transistors that use temperature gradients to generate electricity, yielding in experimental setups. They operate by leveraging the Seebeck effect, using a temperature difference to drive charge carrier movement. Bismuth oxyselenide have been investigated for use in field-effect transistors. These 2D materials exhibit high electron mobility and stability in air. One study reported that these materials enabled transistors that were 40% faster and 10% more efficient than Intel's chips. Bismuth can reduce contact resistance when paired with 2D semiconductors such as. This eliminates the Schottky barrier—a common efficiency issue in metal-semiconductor interfaces. Metal and alloysBismuth is used in alloys with other metals such as tin and lead. Wood's metal, an alloy of bismuth, lead, tin, and cadmium, is used in automatic sprinkler systems for fires. It forms the largest part of Rose's metal, a fusible alloy, which also contains 25–28% lead and 22–25% tin. It was also used to make bismuth bronze, which was used during the Bronze Age, having been found in Inca knives at Machu Picchu.Lead replacementThe density difference between lead and bismuth is small enough that for many ballistics and weighting applications, bismuth can substitute for lead. For example, it can replace lead as a dense material in fishing sinkers. It has been used as a replacement for lead in shot, bullets and less-lethal riot gun ammunition. The Netherlands, Denmark, England, Wales, the United States, and many other countries now prohibit the use of lead shot for the hunting of wetland birds, as many birds are prone to lead poisoning owing to mistaken ingestion of lead to aid digestion, or even prohibit the use of lead for all hunting, such as in the Netherlands. Bismuth-tin alloy shot is one alternative that provides similar ballistic performance to lead.Bismuth, as a dense element of high atomic weight, is used in bismuth-impregnated latex shields to shield from X-ray in medical examinations, such as CTs, mostly as it is considered non-toxic. The European Union's Restriction of Hazardous Substances Directive for reduction of lead has broadened bismuth's use in electronics as a component of low-melting point solders, as a replacement for traditional tin-lead solders. Its low toxicity will be especially important for solders to be used in food processing equipment and copper water pipes, although it can also be used in other applications including those in the automobile industry, in the European Union, for example. Bismuth has been evaluated as a replacement for lead in free-machining brasses for plumbing applications, although it does not equal the performance of leaded steels. Other metal uses and specialty alloysMany bismuth alloys have low melting points and are found in specialty applications such as solders. Many automatic sprinklers, electric fuses, and safety devices in fire detection and suppression systems contain the eutectic alloy that melts at This is a convenient temperature since it is unlikely to be exceeded in normal living conditions. Low-melting alloys, such as Bi-Cd-Pb-Sn alloy which melts at, are also used in automotive and aviation industries. Before deforming a thin-walled metal part, it is filled with a melt or covered with a thin layer of the alloy to reduce the chance of breaking. Then the alloy is removed by submerging the part in boiling water.Bismuth is used to make free-machining steels and free-machining aluminium alloys for precision machining properties. It has similar effect to lead and improves the chip breaking during machining. The shrinking on solidification in lead and the expansion of bismuth compensate each other and therefore lead and bismuth are often used in similar quantities. Similarly, alloys containing comparable parts of bismuth and lead exhibit a very small change upon melting, solidification or aging. Such alloys are used in high-precision casting, e.g. in dentistry, to create models and molds. Bismuth is also used as an alloying agent in production of malleable irons and as a thermocouple material. Bismuth is also used in aluminium-silicon cast alloys to refine silicon morphology. However, it indicated a poisoning effect on modification of strontium. Some bismuth alloys, such as, are combined with non-sticking materials such as mica, glass and enamels because they easily wet them allowing to make joints to other parts. Addition of bismuth to caesium enhances the quantum yield of caesium cathodes. Sintering of bismuth and manganese powders at produces a permanent magnet and magnetostrictive material, which is used in ultrasonic generators and receivers working in the range and in magnetic and holographic memory devices. Other uses as compounds
Toxicology and ecotoxicologyScientific literature indicates that some of the compounds of bismuth are less toxic to humans via ingestion than other heavy metals presumably due to the comparatively low solubility of bismuth salts. Its biological half-life for whole-body retention is reported to be 5 days but it can remain in the kidney for years in people treated with bismuth compounds.Bismuth poisoning can occur and has according to some reports been common in relatively recent times. As with lead, bismuth poisoning can result in the formation of a black deposit on the gingiva, known as a bismuth line. Poisoning may be treated with dimercaprol; however, evidence for benefit is unclear. Bismuth's environmental impacts are not well known; it may be less likely to bioaccumulate than some other heavy metals, and this is an area of active research. |