Alternative fuel
Alternative fuels, also known as non-conventional and advanced fuels, are fuels derived from sources other than petroleum. Alternative fuels include gaseous fossil fuels like propane, natural gas, methane, and ammonia; biofuels like biodiesel, bioalcohol, and refuse-derived fuel; and other renewable fuels like hydrogen and electricity.
These fuels are intended to substitute for more carbon intensive energy sources like gasoline and diesel in transportation and can help to contribute to decarbonization and reductions in pollution. Alternative fuel is also shown to reduce non-carbon emissions such as the release of nitric oxide and nitrogen dioxide, as well as sulfur dioxide and other harmful gases in the exhaust. This is especially important in industries such as mining, where toxic gases can accumulate more easily.
Official definitions
Definition in the European Union
In the European Union, alternative fuel is defined by Directive 2014/94/EU of the European Parliament and of the Council of 22 October 2014 on the deployment of alternative fuels infrastructure.Definition in the US
In the US, the EPA defines alternative fuel asDefinition in Canada
In Canada, since 1996, Alternative Fuels Regulations SOR/96-453 Alternative Fuels Act defined alternative fuel:China
In China, alternative fuel vehicles should comply with technical guidelines for the local production of alternative-fuel vehicles: they should have a shelf life of more than, and a complete charge should take less than seven hours. Up to 80% of a charge must be available after less than 30 minutes of charging. In addition, pure-electric vehicles must consume electric energy of less than 0.16 kWh/km.Biofuel
Biofuels are also considered a renewable source. Although renewable energy is used mostly to generate electricity, it is often assumed that some form of renewable energy or a percentage is used to create alternative fuels.Research is ongoing into finding more suitable biofuel crops and improving the oil yields of these crops. Using the current yields, vast amounts of arable land and fresh water would be needed to produce enough oil to completely replace fossil fuel usage.
Biomass
Biomass in the energy production industry is living and recently dead biological material which can be used as fuel or for industrial production. It has become popular among coal power stations, which switch from coal to biomass in order to convert to renewable energy generation without wasting existing generating plant and infrastructure. Biomass most often refers to plants or plant-based materials that are not used for food or feed, and are specifically called nitrocellulose biomass. As an energy source, biomass can either be used directly via combustion to produce heat, or indirectly after converting it to various forms of biofuel.Algae fuel
Algae-based biofuels have been promoted in the media as a potential panacea to crude oil-based transportation problems. Algae could yield more than 2000 gallons of fuel per acre per year of production. Algae based fuels are being successfully tested by the U.S. Navy Algae-based plastics show potential to reduce waste and the cost per pound of algae plastic is expected to be cheaper than traditional plastic prices.Biodiesel
Biodiesel is made from animal fats or vegetable oils, renewable resources that come from plants such as atrophy, soybean, sunflowers, corn, olive, peanut, palm, coconut, safflower, canola, sesame, cottonseed, etc. Once these fats or oils are filtered from their hydrocarbons and then combined with alcohol like methanol, diesel is produced from this chemical reaction. These raw materials can either be mixed with pure diesel to make various proportions or used alone. Despite one's mixture preference, biodiesel will release a smaller number of pollutants than conventional diesel, because biodiesel burns both cleanly and more efficiently. Even with regular diesel's reduced quantity of sulfur from the LSD invention, biodiesel exceeds those levels because it is sulfur-free.Alcohol fuels
Methanol and ethanol fuel are primary sources of energy; they are convenient fuels for storing and transporting energy. These alcohols can be used in internal combustion engines as alternative fuels. Butane has another advantage: it is the only alcohol-based motor fuel that can be transported readily by existing petroleum-product pipeline networks, instead of only by tanker trucks and railroad cars.Ammonia
can be used as fuel. Benefits of ammonia for ships include reducing greenhouse gas emissions. Nitrogen reduction is being considered as a possible component for fuel cells and combustion engines through research of conversion of ammonia to nitrogen gas and hydrogen gas.Ammonia is the simplest molecule that carries hydrogen in a liquid form. It is carbon-free and can be produced using renewable energy. Ammonia can become a transitional fuel soon because of its relative easiness of storage and distribution.
Emulsion fuel
s include multiple components that are mixed to a water-in-oil emulsion, which are created to improve the fuels combustive properties. Diesel can also be emulsified with water to be used as a fuel. It helps in improving engine efficiency and reducing exhaust emissions.Carbon-neutral and negative fuels
is synthetic fuel—such as methane, gasoline, diesel fuel or jet fuel—produced from renewable or nuclear energy used to hydrogenate waste carbon dioxide recycled from power plant flue exhaust gas or derived from carbolic acid in seawater. Such fuels are potentially carbon neutral because they do not result in a net increase in atmospheric greenhouse gases. To the extent that carbon neutral fuels displace fossil fuels, or if they are produced from waste carbon or seawater carbolic acid, and their combustion is subject to carbon capture at the flue or exhaust pipe, they result in negative carbon dioxide emission and net carbon dioxide removal from the atmosphere, and thus constitute a form of greenhouse gas remediation. Such carbon neutral and negative fuels can be produced by the electrolysis of water to make hydrogen used in the Sabatier reaction to produce methane which may then be stored to be burned later in power plants as synthetic natural gas, transported by pipeline, truck, or tanker ship, or be used in gas to liquids processes such as the Fischer–Tropsch process to make traditional transportation or heating fuels.Carbon-neutral fuels have been proposed for distributed storage for renewable energy, minimizing problems of wind and solar intermittent, and enabling transmission of wind, water, and solar power through existing natural gas pipelines. Such renewable fuels could alleviate the costs and dependency issues of imported fossil fuels without requiring either electrification of the vehicle fleet or conversion to hydrogen or other fuels, enabling continued compatible and affordable vehicles. Germany has built a 250-kilowatt synthetic methane plant which they are scaling up to 10 megawatts. Audi has constructed a carbon neutral liquefied natural gas plant in Werlte, Germany. The plant is intended to produce transportation fuel to offset LNG used in their A3 Sportback g-tron automobiles, and can keep 2,800 metric tons of CO2 out of the environment per year at its initial capacity. Other commercial developments are taking place in Columbia, South Carolina, Camarillo, California, and Darlington, England.
The least expensive source of carbon for recycling into fuel is flue-gas emissions from fossil-fuel combustion, where it can be extracted for about US$7.50 per ton. Automobile exhaust gas capture has also been proposed to be economical but would require extensive design changes or retrofitting. Since carbonic acid in seawater is in chemical equilibrium with atmospheric carbon dioxide, extraction of carbon from seawater has been studied. Researchers have estimated that carbon extraction from seawater would cost about $50 per ton. Carbon capture from ambient air is more costly, at between $600 and $1000 per ton and is considered impractical for fuel synthesis or carbon sequestration.
Nighttime wind power is considered the most economical form of electrical power with which to synthesize fuel, because the load curve for electricity peaks sharply during the warmest hours of the day, but wind tends to blow slightly more at night than during the day. Therefore, the price of nighttime wind power is often much less expensive than any alternative. Off-peak wind power prices in high wind penetration areas of the U.S. averaged 1.64 cents per kilowatt-hour in 2009, but only 0.71 cents/kWh during the least expensive six hours of the day. Typically, wholesale electricity costs 2 to 5 cents/kWh during the day. Commercial fuel synthesis companies suggest they can produce fuel for less than petroleum fuels when oil costs more than $55 per barrel. The U.S. Navy estimates that shipboard production of jet fuel from nuclear power would cost about $6 per gallon. While that was about twice the petroleum fuel cost in 2010, it is expected to be much less than the market price in less than five years if recent trends continue. Moreover, since the delivery of fuel to a carrier battle group costs about $8 per gallon, shipboard production is already much less expensive. However, U.S. civilian nuclear power is considerably more expensive than wind power. The Navy's estimate that 100 megawatts can produce 41,000 gallons of fuel per day indicates that terrestrial production from wind power would cost less than $1 per gallon.
Hydrogen and formic acid
Hydrogen is an emissionless fuel. The byproduct of hydrogen burning is water, although some mono-nitrogen oxides NOx are produced when hydrogen is burned with air.Another fuel is formic acid. The fuel is used by converting it first to hydrogen and using that in a fuel cell. Formic acid is much more easy to store than hydrogen.