6mm AR

The 6mm AR / 6x38mm AR is an intermediate centerfire wildcat cartridge initially designed by Robert Whitley for long-range performance in an AR-15 rifle.

Description

The cartridge uses a 6.5 Grendel case that has been necked-down to accept a 6.2 mm bullet.
The 6mm AR takes advantage of the wide variety of 6.2 mm caliber bullets. Slim, long bullets with high ballistic coefficient are ideal for energy retention at long ranges.
It is similar to the 6PDK which also uses a 6.2 mm bullet and a similar muzzle energy and case capacity to the 6mm AR and 6.5 Grendel, in a casing somewhat popular for the AR-15, a necked-down 6.8mm Remington SPC casing.

6mm AR Turbo 40 Improved

This variant uses an Ackley Improved fire formed case with less tapering and a 40-degree higher shoulder permitting a larger powder capacity. It is claimed by its maker to be capable of driving a or heavier grain projectile at .

6mm Rat and FatRat

These wildcats also push forward the shoulder of the same necked Grendel case similar to the Turbo 40, yielding more powder capacity. or heavier grain VLD boat-tail bullets have to be seated deeply within the case neck, however, rendering some of these volume gains illusory but there is an increase in volume even with the longer bullets nonetheless.

6mm Grinch

Similar to the 6mm Turbo 40 and 6mm FatRat, the 6mm Grinch has a blown-forward shoulder on par with the 6mm Dasher to eke maximum powder capacity from the necked Grendel case.