6.5mm Grendel
The 6.5mm Grendel is an intermediate cartridge jointly designed by British-American armorer Bill Alexander, competitive shooter Arne Brennan and Lapua ballistician Janne Pohjoispää, as a low-recoil, high-precision rifle cartridge specifically for the AR-15 platform at medium/long range. It is an improved variation of the 6.5mm PPC.
The 6.5mm Grendel cartridge was first unveiled in May 2003 at the Blackwater Training Facility in North Carolina, where it remained supersonic at range and out-shot the 7.62mm NATO with only half the recoil. Since its introduction, it has proven to be a versatile cartridge and is now expanding into other firearm design platforms including bolt-action rifles and the Kalashnikov system.
The name "Grendel" is inspired by the mythical monster antagonist from the Old English epic poem Beowulf. It was a trademark owned by Alexander Arms and manufactured at Radford Arsenal, until legally released in 2010 for SAAMI standardization with collaboration from Hornady.
Development and history
The goal of the 6.5mm Grendel design was to create an effective STANAG magazine-length cartridge for the AR-15 platform that could reach and surpass the performance of the native 5.56mm NATO/.223 Remington cartridge. Constrained by the dimension of the STANAG magazines, the Grendel's designers decided to use a shorter, larger-diameter case for higher powder volume while allowing space for the long, streamlined, high ballistic coefficient 6.5mm bullets. Firing factory-loaded ammunition with bullets ranging from, its muzzle velocity varies from with 129- and bullets to with bullets. Depending on their case material and bullet weight, 6.5mm Grendel cartridges weigh.The case head diameter of the Grendel is the same as that of the 5.6×39mm, 7.62×39mm and 6.5mm PPC cases. This diameter is larger than the 5.56×45mm NATO, thereby necessitating the use of a non-standard AR-15 bolt. The increased case diameter results in a small reduction in the magazine ammo capacities. A 6.5mm Grendel magazine with the same dimensions as a 30-round STANAG magazine will hold 26 rounds of Grendel ammunition.
Performance
Proponents assert that the Grendel is a good "middle ground" between the 5.56×45mm NATO and the 7.62×51mm NATO. It retains greater terminal energy at extended ranges than either of these cartridges due to its higher ballistic coefficient.For example, the 6.5 mm Grendel bullet has more kinetic energy and better body armor penetration at than the larger and heavier bullet of the M80 7.62mm NATO round.
In order to obtain ballistics that are superior to the 7.62×51mm cartridge, a weapon with a longer barrel and firing a heavier bullet is necessary. To achieve the same results from shorter-length barrels, even heavier bullets are needed.
External ballistics
As noted above, the Grendel case is very closely related to the.220 Russian case. In general, each additional grain of bullet weight will reduce muzzle velocity by 10.8 ft/s and each additional inch of barrel length will increase muzzle velocity by 20 ft/s. Specific details are available as graphs derived from Alexander Arms' public domain load table linked below.LE and Military usage
has adopted two rifles made by Zastava Arms in 6.5 mm Grendel caliber as main armament for its armed forces. The two rifles, designated Zastava M19 and Zastava M20, are derivatives of the previous-issue M70 rifle. Serbia is also currently testing a light machine gun chambered in 6.5 Grendel based on their current Zastava M84 general purpose machine gun which is chambered in 7.62×54mmR. An American-manufactured rifle in 6.5mm Grendel caliber may also be adopted in armament for special forces units after it passes testing in Technical Testing Center. Three types of 6.5mm Grendel ammunition produced by Prvi Partizan of Užice, Serbia, will be tested for use with these rifles.The French police tactical unit GIGN announced in 2025 that they are partnering with Swiss ammunition maker SwissP Defenc to produce 6.5 Grendel cartridges for the GIGN.