3 Corner Satellite


Three Corner Satellite consisted of three student-built microsatellites flying in formation. Primary mission objectives were to demonstrate formation flying, provide stereoscopic imaging of cloud formations, and demonstrate distributed and autonomous operations.
A pair of spacecraft, Ralphie and Sparkie, was developed by the University of Colorado at Boulder and Arizona State University as part of the Air Force Research Laboratory's University Nanosat Program. A third satellite, Petey, developed by New Mexico State University was originally also part of the 3CS.
The 3CS stack was originally slated for launch aboard the Space Shuttle in 2003, but after the Shuttle Columbia tragedy, mission organizers switched to the first launch of the Boeing Delta IV Heavy rocket. Due to a problem with the rocket during launch, the 3CS satellites on board, Sparkie and Ralphie, failed to achieve orbit. The satellites were to have been dropped off at a low 180 km × 240 km, but they entered orbit at a height of only 105 km, which led to a rapid decay.
The third 3CS satellite Petey was not aboard the 3CS launch on Delta IV Heavy and was later donated to the National Air and Space Museum’s Steven F. Udvar-Hazy Center.
[Image:Demosat with 3CSat.jpg|thumb|none|alt=3CS placed atop the launch vehicle.|3CS placed atop the launch vehicle]

Project Mission

Primary mission objectives:
Secondary mission objectives:
The spacecraft were equipped with robust execution management software, Continuous Activity Scheduling Planning Execution and Replanning software, and Context-sensitive anomaly detection software