Extended Graphics Array


The Extended Graphics Array is a graphics card manufactured by IBM and introduced for the IBM PS/2 line of personal computers in 1990 as a successor to the 8514/A. It supports, among other modes, a display resolution of pixels with 256 colors at 43.5 Hz, or at 60 Hz with up to 65,536 colors. The XGA-2 added an 65,536 color mode and 60 Hz non-interlaced.
The XGA was introduced at $1095 with 512K VRAM and additional $350 for the 512KB memory expansion. As with the 8514/A, XGA required a Micro Channel architecture bus at a time when ISA systems were standard, however due to more extensive documentation and licensing ISA clones of XGA were made. XGA was integrated into the motherboard of the PS/2 Model 95 XP 486.
An improved version called XGA-2 was introduced in 1992 at $360, worth $ in dollars.
XGA gives its name to the resolution, as IBM's VGA gave its name to, despite the IBM 8514/A and PGC cards respectively supporting those resolutions prior to the eponyms.

Features

The 8514 had used a standardised API called the "Adapter Interface" or AI. This interface is also used by XGA, IBM Image Adapter/A, and clones of the 8514/A and XGA such as the ATI Technologies Mach 32 and IIT AGX. The interface allows computer software to offload common 2D-drawing operations onto the hardware. This frees the host CPU for other tasks, and greatly improves the speed of redrawing a graphics visual. Hardware-level documentation of the XGA was also made, which had not been available for the 8514/A.
XGA introduced a 64x64 hardware sprite which was typically used for the mouse pointer.

Differences from 8514/A

  • Register-compatible with VGA
  • Adds a 132 column text mode and high color in
  • Requires a minimum of 80386 host CPU
  • Provides a 3-dimensional drawing space called a "bitmap" which may reside anywhere in system memory
  • Adds a sprite for a hardware cursor
  • The Adapter Interface driver is moved to a.SYS file instead of TSR program
  • Provisions made for multitasking environment
  • XGA can act as bus master and access system memory directly
  • Hardware level documentation has been provided by IBM

    XGA-2

XGA-2 added support for non-interlaced and made 1MB VRAM standard. It had a programmable PLL circuit and pixel clocks up to 90 MHz, enabling a 75 Hz refresh rate at. The resolution was added with 16 bit high color support. The DAC was increased to 8 bits per channel, and the accelerated functions were enabled at 16 bit color depth. Faster VRAM also improved performance.

Output capabilities

The XGA offered:
  • ':
  • *graphics mode with 256 colors at once out of 262,144 ;
  • *graphics with 65,536 colors at once ;
  • *text mode with 80×34 characters
  • ':
  • *graphics with 256 colors out of 262,144;
  • *text with 85×38 or 146×51 characters
XGA-2 introduced:
  • ' graphics with 256 colors out of 16.7M ;
  • graphics with 65,536 colors at once;
  • ' graphics with 256 colors out of 16.7M
Later clone boards offered additional resolutions:
  • ' graphics with 16.7M accessible colors at once ';
  • ' graphics with 16.7M colors at once;
  • ''' graphics with 65,536 and 16.7M colors at once

    Clones

Unlike with the 8514/A, IBM fully documented the hardware interface to XGA. Further, IBM licensed the XGA design to SGS-Thomson and Intel. The IIT AGX014 was largely compatible with the XGA-2 and offered some enhancements.
The VESA Group introduced a common standardized way to access features like hardware cursors, Bit Block transfers, off screen sprites, hardware panning, drawing and other functions with VBE/accelerator functions in August 1996. This, along with standardised device drivers for operating systems such as Microsoft Windows, eliminated the need for a hardware standard for graphics.