Volvo Trucks
Volvo Trucks is a truck manufacturing division of Volvo based in Gothenburg, Sweden.
Volvo Trucks was a separate company within Volvo. The Volvo Group was reorganised on 1 January 2012 and as a part of the process, Volvo Trucks ceased to be a separate company and was instead incorporated into Volvo Group Trucks along Volvo's other truck operations, as Renault Trucks and Mack Trucks.
The first Volvo truck rolled off the production lines in 1928, and in 2016 Volvo Trucks employed more than 52,000 people around the world. With global headquarters in Gothenburg, Sweden, Volvo manufactures and assembles its trucks in eight wholly owned assembly plants and nine factories owned by local interests. Volvo Trucks produces and sells over 190,000 units annually.
History
When Volvo manufactured its first automobiles in 1927, the first truck was already on the drawing table. In early 1928, the LV series 1 was presented to the public. Though by modern standards it was merely a truck, it was an immediate success and 500 units were sold before the summer. It had a 2.0 L 4-cylinder engine rated at 28 hp.Volvo Trucks worldwide
Volvo cabs are manufactured in the north of Sweden in Umeå and in Ghent, Belgium, while the engines are made in the central town of Skövde. Among some smaller facilities, Volvo has assembly plants in Sweden, Belgium, USA, Brazil, South Africa, Australia, China and India. Some of the smaller factories are jointly owned. Its main parts distribution centre is located in Ghent, Belgium. The sales side, with their corresponding offices and dealers, is split into seven sales areas – Latin America, North America, Europe North, Europe South, Africa/Middle East, and Asia/Oceania.Production facilities
Plants where Volvo trucks are manufactured:- New River Valley, Dublin, Virginia, USA
- Curitiba, Brazil
- Umeå, Sweden
- Gothenburg, Sweden
- Ghent, Belgium
- Durban, South Africa
- Bangalore, India
- Bangkok, Thailand
- Brisbane, Australia
North America
Following the 1981 acquisition, Volvo upgraded the designs of White and Autocar product lines. In 1982, the White Integral Sleeper was introduced, joining the sleeper and passenger cab seamlessly. In 1983, the Road Boss was replaced by the White Conventional; while retaining the same cab, the hoodline was lowered with a redesigned grille. In 1985, the Integral Tall Sleeper was developed as a raised-roof variant of the Integral Sleeper. In 1987, the White 'Aero' truck was introduced, adopting a lowered hoodline, composite headlamps, and a flush-mounted grille. In 1988, the WG was introduced, marking the return of a short-hood conventional. The Autocar DK severe-duty line was launched in 1983 and supplemented by the widely admired Autocar AT64F long-haul tractor. In 1988, the DK was replaced by the Autocar ACL and ACM models. While the AC-series trucks were tough and reliable, they incorporated a number of Volvo components and, for some Autocar loyalists, marked a dilution of the Autocar brand.
In 1986, Volvo commenced sales of trucks under its own brand in North America, introducing the FE-series low-cab COEs. While Western Star was spun off in 1981, its cabover model line continued to be produced by White and rebadged as a Western Star.
On 16 August 1986, General Motors announced the formation of a joint venture with AB Volvo, with the latter holding an 85% stake. Named Volvo GM Heavy Truck Corporation, Volvo would take responsibility for development, design, and production of heavy trucks of the joint venture, named WhiteGMC. All General Motors heavy product lines were discontinued ; the joint venture rebadged the White product line as WhiteGMCs while Autocars remained in production. In 1995, Volvo GM ended the use of the WhiteGMC name, with all non-Autocar models adopting the Volvo name. In 1997, Volvo AB purchased the rest of its stake in Volvo GM, renaming it Volvo Trucks North America.
In 1996, Volvo released the Volvo VN-series, the first Volvo truck developed outside of White or General Motors. Designed specifically for North America, the VN was more aerodynamic than its WIA predecessor. The previous-generation WG remained in production, with Autocar dropped as a separate brand name, becoming a sub-model of Volvo severe-service trucks.
On 25 April 2000, AB Volvo acquired Renault Véhicules Industriels through a merger, making it the owner of Mack Trucks. Following the merger, Volvo became the largest European truck manufacturer and the second-largest truck manufacturer in the world. To secure approval of the merger, Volvo agreed to divest its low-cabover range ; alongside the Mack MR/LE, the two vehicles held a predominant share of the refuse market. In 2007, Volvo re-entered the segment through its purchase of UD Nissan Diesel. Alongside the Xpeditor product range, the Autocar trademark was sold in 2001 to Grand Vehicle Works LLC, a Chicago-based private holding company that owned body manufacturer Union City Body Company and Workhorse Custom Chassis. Shortly before Autocar was acquired by GVW Group, Autocar conventionals were retired.
In 2000, Volvo introduced the VHD severe-service conventional, largely as a replacement for Autocar conventional vehicles. While using the cab of the VN, the VHD used a heavier-duty chassis and suspension, along with sealed-beam headlamps. In 2002, the second-generation VN, the VNL, was introduced.
In 2009, Volvo began to relocate the operations of its Mack Trucks subsidiary to Greensboro, where the North American operations of Volvo Trucks have been headquartered. Today, Volvo produces Class 8 Volvo trucks at its Dublin, Virginia plant and Class 8 Mack truck models in Macungie, Pennsylvania. Affiliate Volvo Powertrain produces engines and transmissions at its Hagerstown, Maryland, facility, for use exclusively in the North American market.
The Volvo Trucks North America Dublin plant began manufacturing a battery-powered VNR Electric truck model starting in early 2021. It was the largest Volvo truck plant in the world, employing close to 3,000 people building multiple models of heavy-duty trucks. On 20 June 2022, Volvo announced that "in the second part of this decade" it would begin making trucks using hydrogen fuel cells with a range of 600 miles, compared to 275 miles for the existing VNR trucks.
In September 2024, Volvo Trucks announced a long-range variant of its FH Electric truck, capable of covering up to 600 km on a single charge. It is expected to arrive on the market in the second half of 2025.
China
AB Volvo struck a deal in August 2021 to buy a heavy duty truck subsidiary of Jiangling Motors Corp for about $125.7 million to make trucks in the world's biggest vehicle market. The acquired business includes a manufacturing site in China's northern city of Taiyuan. Volvo aims to start production of its new heavy duty Volvo FH, Volvo FM and Volvo FMX trucks there at the end of 2022.File:Volvo FM500.jpg|thumb|2024 Volvo FM500 6x4 Puller Ballast Tractor with factory fitted ballast box and drawbar coupling in Hoskote, Bengaluru, India.