Timber pilings
Timber pilings serve as the foundations of many historic structures such as canneries, wharves, and shore buildings. The old pilings present challenging problems during restoration as they age and are destroyed by organisms and decay. Replacing the foundation entirely is possible but expensive. Regularly inspecting and maintaining timber piles may extend the life of the foundation.
Historic use and treatment in water
Timber pile construction in the aquatic and marine environment has a long history in Europe dating as far back as the bronze and Stone Age in Switzerland. Similar technologies are known to have existed in East Asia, from the c.5000-3300 BC, the Hemudu culture, of Zhejiang Province, being noted for its use of Stilt houses.Swiss lake dwellers
During severe droughts in Switzerland in the mid-nineteenth century, lake areas that had been previously inundated with water were exposed to reveal ancient archaeological remains of various types of timber piling support assemblies that served as foundations for both individual houses and community buildings. The design of these timber assemblies varied by the time of occupation, whether during the bronze or Stone Age, and also by geological conditions where the timbers rested.The communities were called the Swiss Lake Dwellers and were located in various fresh water lakes around Zürich and other areas in Switzerland. During the archaeological excavations, many of the piles dissolved after being in contact with air.
Early building piling foundations in Venice, Italy
In Venice, some of the early piling foundations were built on timber piles. The early Venetian constructors used building techniques that included using impermeable stone supported by wooden rafts and timber piles. The timber piles did not rot because they were set into the mud at the bottom of the lagoon which prevented oxygen and harmful microbes from reaching them.Historic treatment and preservation in marine waters
Treatment methods used prior to 18th century
Over 2,000 years ago, wood builders were aware of marine borers and decay and protected wood using crude extracts and various chemicals. Further study on how to address marine borer activity and decay accelerated in the 18th century.Treatment methods revived in 18th & 19th centuries
In the 18th and 19th centuries the study of wood preservation was revived due to the deterioration of the timber pile dikes that protected Holland as well as the high level of decay and marine borer activity in English Navy ships.The early dikes in Holland were supported by timber piles.
Creosote derived from coal processing, was discovered in the mid-18th century to prevent timber pile decay. The development of Creosote pressure treatment by John Bethel was also an important advancement in timber piling construction. Historic buildings supported by timber piles may either be treated with creosote or chromated copper arsenate.
Types of wood used
In the United States, Douglas-Fir timber piles are used most often in the Pacific Northwest while Southern Pine are used most commonly on the East Coast. Douglas-Fir is used most commonly on the west coast due to its high strength, renewability and low cost.Piling deterioration problems
Marine borers
There are three groups of marine borers in West Coast waters including gribbles, shipworms, and pholads, and each differs in the type of damage it causes.Gribbles
A Gribble is a destructive crustacean that burrows into the wood surfaces. Unlike other marine borers, gribbles travel easily from timber to timber using the wood for food and shelter. Gribbles burrow to a shallow depth but can still reduce pile diameter by one inch per year; a gribble infested pile typically has an hour-glass shape at the tide line.Shipworms
are wood-boring bivalves that burrow deeply into submerged wood. Although piles attacked by shipworms may appear sound on the surface, they may be completely riddled with a maze of tunnels. Shipworms can spread to new wood only when they are in the free-swimming larval stage. Once they attack and bore into the wood, they become imprisoned within it. Ancient mariners, realizing that shipworms were imprisoned in the wood of their ships, would sail far up river and remain in fresh water for a number of months to kill the shipworms. Experienced divers look for siphons that project from the wood or use sonic devices to estimate the extent of internal damage. Shipworm and gribble attacks can also be detectedby immersing untreated wood panels and destructively sampling them at monthly intervals.
Pholads
Pholads, rock-burrowing clams, burrow into and damage untreated wood in warmer waters near Hawaii and Mexico and along Oregon beaches boring only into the surface of the wood. Ensuring that the shell of the wood is undamaged will keep this Pholad borer at bay.Insects
Wood above the waterline may be attacked by a number of insects, including termites, carpenter ants, and beetles. One beetle, the wharf borer, can attack untreated or damaged treated hardwoods and conifers with high moisture contents by tunneling extensively and leaving behind dark brown fecal matter that further degrades the wood.Wood decay
Wood decay describes wood in all stages of fungal attack, from the initial invasion of hyphae into the cell walls to the complete destruction of the wood. Wood-inhabiting fungi are most common on timber piles above the water surface since the lack of oxygen below water inhibits fungal growth.Methods of detecting decay
Incipient decay may develop in untreated pile tops within 1 year and reach the visible, advanced stage, termed rot, within 2 to 4 years and can extend 4 feet or more from the internally rotting areas of a Douglas-fir pile. A triangular blade scraper, a sharp shovel, or a dull probe are useful when inspecting piles for surface deterioration or marine borer attack because they allow the inspector to estimate the depth of deterioration. Because untreated wood can often be exposed while these tools are being used, a preservative solution or paste should be applied to exposed areas.Cracks
Cracks that have developed after the wood has been treated are highly susceptible to borers, insects and decay in the right conditions. Cracks need to be evaluated during an initial pile inspection to ascertain depth, location and treatment condition.Decay treatment options
Liquid preservatives
Apply a liquid preservative to cutoff tops of piles and timbers by flooding themwith hot creosote, pentachlorophenol in diesel oil, or copper naphthenate in mineral spirits.