Tetrahalodiboranes
Tetrahalodiboranes are a class of diboron compounds with the formula . These compounds were first discovered in the 1920s, but, after some interest in the middle of the 20th century, were largely ignored in research. Compared to other diboron compounds, tetrahalodiboranes are fairly unstable and historically have been difficult to prepare; thus, their use in synthetic chemistry is largely unexplored, and research on tetrahalodiboranes has stemmed from fundamental interest in their reactivity. Recently, there has been a resurgence in interest in tetrahalodiboranes, particularly in diboron tetrafluoride as a reagent to promote doping of silicon with for use in semiconductor devices.
Structure
Because the perpendicular and planar geometries of tetrahalodiboranes are generally very close in energy, the energetic difference between these two structures has been the most investigated aspect of the geometry of these molecules. As it turns out, the difference is dependent on the identity of the halide in the compound. adopts a planar geometry in both as a solid and in the gas phase. The barrier to rotation, however, is small l. Diboron tetrachloride, however, adopts a planar geometry when crystalized but favors the perpendicular geometry in the gas phase. Computations of the relative stability of the two conformers indicate that the D2d geometry is ~2 kcal/mol lower in energy; the planar geometry in the solid phase is thought to be due to packing effects. Continuing this trend, computational modeling and experimental results agree that and favor the perpendicular D2d geometry.Synthesis
The first synthesis of a tetrahalodiborane was reported by Stock et al. in 1925 where the authors reduced to form by running a current between zinc electrodes immersed in liquid. Later work explored gas phase syntheses of using gaseous and mercury electrodes. Early characterization of reported the to be a colorless, pyrophoric liquid that decomposes at temperatures above 0 °C. was not synthesized until 1958 when Finch and Schlesinger reported the successful synthesis of with antimony trifluoride to form. Unlike, is stable at room temperature. The heavier tetrahalodiboranes, and, were first published in 1949 by Schlesinger et al. and Schumb respectively. was first accessed by reacting and. was first synthesized using electrodeless radiofrequency discharge to reduce. is stable at temperatures below -40 °C, while is stable below 0 °C. also degrades when exposed to light. Decomposition of at elevated temperatures yields a and a black solid found to be a mixture of and.The initial interest in tetrahaloiboranes was largely fundamental, and more applied consideration of tetrahalodiboranes was largely limited by the difficulty of synthesis and the low stability of isolated compounds. Recent improvements in the synthesis of tetrahalodiboranes has yielded more convenient solution phase syntheses of,,, and. The solution phase synthesis of first reported by Noth et al in 1981 has not been improved upon. To form in solution, is treated with. Other tetrahalodiboranes can be accessed from in the solution phase by reacting with,, or to form,, or respectively. These improvements in synthetic methods have opened the door for exploring potential applications of tetrahalodiboranes; while this interest has been fairly limited thus far, researchers have begun to explore the use of tetrahalodiboranes as synthetic building blocks and for use in industrial applications. Notably, recent publications discussing tetrahalodiboranes have been largely in patent literature discussing the use of to replace as a feed chemical to dope semiconductors with boron ions.
Reactivity
Lewis base adduct formation
The boron atoms in tetrahalodiboranes are highly lewis acidic and readily form adducts with neutral lewis bases. Though the formation of these complexes is usually energetically favorable, early attempts to form these lewis acid base complexes were hindered by the lability of the halogen substituents; prior to the 1992 publication of three additional phosphane-tetrahalodiborane adducts, only three lewis acid-lewis base adducts had been reported. Other work has described many more lewis acid-lewis base adducts that form readily, but also outline how stability challenges with tetrahalodiboranes persist even in stabilized complexes. Examples of these unstable tetrahalodiborane-lewis base adducts include the bis-diethyl ether adduct formed with or, the bis-adduct of and either or, and adducts formed by or and weak phosphine donors such as or.There are, however, some adducts that are stable beyond room temperature. and both form stable mono- and bis-adducts with aprotic nitrogen donors. The first of these stable lewis base-tetrahalodiborane adducts was published in 2012 by Braunshcweig et al. showing that is stable at ambient temperature. could then be reduced to form, a stable diborene, and could ultimately be reduced further to form the first isolable diboryne. Since this discovery, the Braunschweig group has published a number of other stable tetrahalodiborane adducts including some monoadducts and some asymmetrical bis adducts. These adducts are typically characterized using 11B NMR.
Reaction with transition metals
There has been some investigation of the reactivity of tetrahalodiboranes with transition metals. Norman et al. reported reactivity of with to form cis- where. Because the boron-halide bonds in are substantially less reactive than in heavier tetrahalodiboranes, it is unsurprising that reactivity with Pt occurs at the B-B bond.Because it was expected that heavier tetrahalodiboranes might have more reactive boron-halide bonds, the reactivity of with electron rich was explored. The greater lability of the B-I bond relative to the B-F bond in allowed for the formation of a diplatnum complex with borryl ligands and a bridging.