Tetrafluoroberyllate


Tetrafluoroberyllate or orthofluoroberyllate is an anion with the chemical formula. It contains beryllium and fluorine. This fluoroanion has a tetrahedral shape, with the four fluorine atoms surrounding a central beryllium atom. It has the same size, charge, and outer electron structure as sulfate. Therefore, many compounds that contain sulfate have equivalents with tetrafluoroberyllate. Examples of these are the langbeinites, and Tutton's salts.

Properties

The Be–F bond length is between 145 and 153 pm. The beryllium is sp3 hybridized, leading to a longer bond than in [BeF2|], where beryllium is sp hybridized. In trifluoroberyllates, there are actually tetrahedra arranged in a triangle, so that three fluorine atoms are shared on two tetrahedra each, resulting in a formula of.
In the tetrafluoroberyllates, the tetrahedra can rotate to various degrees. At room temperature, they are hindered from moving. But as temperature increases, they can rotate around the threefold axis, with a potential barrier of. At higher temperatures, the movement can become isotropic with a potential barrier of.
Similar compounds have magnesium or zinc in a similar position as beryllium, e.g. or but these are not as stable.
Tetrafluoroberyllate has a biological effect by inhibiting F-ATPase adenosine triphosphate producing enzymes in mitochondria and bacteria. It does this by attempting to react with adenosine diphosphate because it resembles phosphate. However once it does this it remains stuck in the F1 part of the enzyme and inhibits it from further function.

Simple salts

Sodium tetrafluoroberyllate has several crystalline forms. Below 220 °C it takes the same form as orthorhombic olivine, and this is called γ phase. Between 220 °C and 320 °C it is in the α′ form. When temperature is raised above 320 °C it changes to the hexagonal α form. When cooled the α′ form changes to β form at 110 °C and this can be cooled to 70 °C before changing back to the γ form. It can be formed by melting sodium fluoride and beryllium fluoride. The gas above molten sodium tetrafluoroberyllate contains and NaF gas.
Lithium tetrafluoroberyllate takes on the same crystal form as the mineral phenacite. As a liquid it is proposed for the molten salt reactor, in which it is called FLiBe. The liquid salt has a high specific heat, similar to that of water. The molten salt has a very similar density to the solid. The solid has continuous void channels through it, which reduces its density. can be crystallised from aqueous solution using and LiCl.
Potassium tetrafluoroberyllate has the same structure as anhydrous potassium sulfate, as does rubidium and caesium tetrafluoroberyllate. Potassium tetrafluoroberyllate can make solid solutions with potassium sulfate. It can be used as a starting point to make the non-linear optic crystal which has the highest power handling capacity and shortest UV performance of any borate. It is quite soluble in water, so beryllium can be extracted from soil in this form.
Ammonium tetrafluoroberyllate decomposes on heating by losing vapour, progressively forming, then and finally.
Thallium tetrafluoroberyllate can be made by dissolving beryllium fluoride and thallium carbonate together in hydrofluoric acid and then evaporating the solution.
Radium tetrafluoroberyllate is used as a standard neutron source. The alpha particles from the radium cause neutrons to be emitted from the beryllium. It is precipitated from a radium chloride solution mixed with potassium tetrafluoroberyllate.
Magnesium tetrafluoroberyllate can be precipitated from a hot saturated solution of ammonium tetrafluoroberyllate and a magnesium salt. However, if the temperature reaches boiling point is precipitated instead.
Calcium tetrafluoroberyllate resembles zircon in the way it melts and crystallises.
Strontium tetrafluoroberyllate can be made in several forms. The γ form is produced by cooling a melt of and and the β form is made by precipitating from a water solution. When melted and heated to 850–1145 °C, gas evaporates leaving behind molten.
The barium tetrafluoroberyllate is very insoluble and can be used for gravimetric analysis of beryllium.
is an acid that can be produced from and HCl. It only exists in aqueous solution.
Triglycine tetrafluoroberyllate is ferroelectric with a transition point of 70 °C. The crystals can be formed by dissolving in water, adding HF and then glycine. When the solution is cooled triglycine tetrafluoroberyllate forms. and in the solution reduce growth on the 001 direction so that tabular shaped crystals of TGFB form. The thallium compound can cut growth on the 001 axis by 99%.

Double salts

Tuttons salts

The Tuttons salt 2Mn2·6 is made from a solution of NH4BeF3 mixed with NH4MnF3.
The equivalent of alums are hard to make because the trivalent ion will often form a complex with fluoride in preference to the beryllium fluoride. However the violet coloured acid and rubidium chrome alum exist at chilly temperatures for a few hours.
Tutton's salts containing magnesium with fluoroberyllate are difficult to produce, as the solutions tend to precipitate insoluble MgF2.
nameformulamolecular weightCAScrystal formdensitymelting pointsolubility g/100ml
potassium lithium tetrafluoroberyllateKLiBeF4131.05P63, a = 8.781 Å, b = 5.070 Å c = 8.566 Å-
rubidium lithium tetrafluoroberyllateRbLiBeF4177.41P6322, a = 8.980 Å, b = 5.185 Å c = 8.751 Å-
caesium lithium tetrafluoroberyllateCsLiBeF4224.852P21/n, a = 9.328 Å b = 5.356 Å, c = 8.736 Å, γ = 89.82°-
acid chromium fluoroberyllate tetracosihydrateH2Cr24·24H2O878.40-----
ammonium chromium fluoroberyllate tetracosihydrate2Cr24·24H2O912.46-----
rubidium chromium fluoroberyllate tetracosihydrateRb2Cr24·24H2O1047.32-----
manganese ammonium fluoroberyllate hydrate2Mn2·6H2O369.1181.758--
Rb2Fe2·6H2O504.884-----
ferrous ammonium fluoroberyllate hydrate2Fe2·6H2O370.025-----
nickel potassium fluoroberyllate hydrateK2Ni2·6H2O414.913-----
nickel rubidium fluoroberyllate hydrateRb2Ni2·6H2O507.732-----
Cs2Ni2·6H2O602.608-----
nickel ammonium fluoroberyllate hydrate2Ni2·6H2O372.874P21/a, a = 9.201 Å, b = 12.482 Å, c = 6.142 Å, β = 106.57 Å, V = 676.0 Å3 Z = 21.843--
cobalt potassium fluoroberyllate hydrateK2Co2·6H2O415.233-----
cobalt rubidium fluoroberyllate hydrateRb2Co2·6H2O507.972-----
cobalt ammonium fluoroberyllate hydrate2Co2·6H2O372.8741.821--
copper rubidium fluoroberyllate hydrateRb2Cu2·6H2O512.585-----
copper ammonium fluoroberyllate hydrate2Cu2·6H2O377.7261.858--
zinc rubidium fluoroberyllate hydrateRb2Zn2·6H2O514.42-----
zinc ammonium fluoroberyllate hydrate2Zn2·6H2O379.561.859--
cadmium rubidium fluoroberyllate hydrateRb2Cd2·6H2O561.45-----
cadmium ammonium fluoroberyllate hydrate2Cd2·6H2O426.591-----

Alums

Tetrafluoroberyllate salts equivalent to alums also exist with formula MABF4·12H2O, where M is univalent, and A trivalent. These are not common as fluoride often form insoluble products with the trivalent ions. Methods to produce these include evaporating mixed fluoride solutions under reduced pressure at 0 °C, or dissolving beryllium and other metal hydroxides in hydrofluoric acid at room temperature, cooled, and them mixing with cold ethyl alcohol, causing cooling and crystallisation. The unit cell dimensions are slightly smaller than the corresponding sulfate alums.
nameformulamolecular weightCAScrystal formdensitymelting pointsolubility g/100ml
ammonium aluminium tetrafluoroberyllate alumNH4AlBeF4·12H2O-
potassium aluminium tetrafluoroberyllate alumKAlBeF4·12H2O-
potassium chromium tetrafluoroberyllate alumKCrBeF4·12H2O-
ammonium chromium tetrafluoroberyllate alumNH4CrBeF4·12H2Ocubic a = 12.218 Å, Z = 4-
rubidium chromium tetrafluoroberyllate alumRbCrBeF4·12H2O12.214 Å-
caesium chromium tetrafluoroberyllate alumCsCrBeF4·12H2O12.323 Å-
thallium chromium tetrafluoroberyllate alumTlCrBeF4·12H2O12.195 Å-
rubidium iron tetrafluoroberyllate alumRbFeBeF4·12H2O-
caesium iron tetrafluoroberyllate alumCsFeBeF4·12H2O-
monomethyl chromium tetrafluoroberyllate alumCH3NH3CrBeF4·12H2O12.496 Å-
guanidium chromium tetrafluoroberyllate alumC3CrBeF4·12H2O12.538 Åon heating forms a rhombohedral hexahydrate stable from 30 °C to 90 °C-