Renfe Class 130


The Renfe Class 130 or S-130 is a push-pull high-speed dual-gauge, dual-voltage trainset consisting of 11 Talgo VII tilting coaches and two power cars, used on Alvia and Euromed services. The class have been nicknamed patitos, due to the shape of the train nose.

Background and design

The trainsets are designed for high-speed services on Iberian gauge and high-speed lines; they can change gauge at low speed without stopping using Talgo's RD variable gauge system. The carriages are constructed from aluminium and incorporate the Talgo Pendular passive pendulum tilting system, are sealed against pressure differences for tunnel travel, and have underframe air conditioning, individual audio systems and video displays, rotating and reclining seats and power outlets.
Capacity in standard class is 36 seated, in first class 26 seats, end coaches have lower capacity, one coach is typically used for restaurant/sales services.
The power cars use AC traction motors controlled by IGBT inverters which include integrated auxiliary inverters. Signalling systems can include ETCS Level 2, LZB, ASFA and Ebicab900TBS.

Operations and services

As of January 2010 they operated from Gijón/Oviedo via León, Palencia, Valladolid to Madrid with some trains extended to Alicante via Albacete; Santander via Palencia and Valladolid to Madrid, sometimes extended to Alicante; Madrid to Bilbao via Valladolid and Burgos; Madrid to San Sebastian/Irun via Valladolid, Burgos and Vitoria; Madrid to Alicante; Huelva and Cádiz and Madrid to Murcia.
Since January 2020 Renfe Class 130 operate on the Figueres–Alicante route via Girona, Barcelona, Camp de Tarragona, Castellón de la Plana and Valencia for the Euromed services.
On services such as Gijón–Madrid they have been replaced by Renfe Class 120 trainsets.

Developments

Renfe Class 730

In order to extend high-quality services to parts of Spain not on the high-speed network Renfe acquired hybrid trains with both electric and diesel power for delivery in 2012 for use from Madrid to Murcia and Galicia, built by Talgo and Bombardier, at a cost of 78 million euro. The new trains based on the S-130 were initially coded S130H, later S730;
Fifteen sets S-130 units will be converted to hybrid operation. with two generator cars per set using MTU 12V 4000 R43L engines. The top speed in diesel mode is. Testing of the trains took place in 2011 with introduction into service expected in 2012.

250km/h+ prototype train

A gauge-changing train capable of over is in development and is based on the S-130.

Uzbekistan trainset order

A version of the S130 for Uzbekistan Temir Yollari was ordered in 2009 for use on a Tashkent–Samarkand high-speed line. Deliveries of the order of two trains began in July 2011.
Two more sets were constructed in 2017, following expansion of the service.