Spider web
A spider web, spiderweb, spider's web, or cobweb is a structure created by a spider out of proteinaceous spider silk extruded from its spinnerets, generally meant to catch its prey.
Spider webs have existed for at least 100 million years, as witnessed in a rare find of Early Cretaceous amber from Sussex, in southern England.
Many spiders build webs specifically to trap and catch insects to eat. However, not all spiders catch their prey in webs, and some do not build webs at all. The term "spider web" is typically used to refer to a web that is apparently still in use, whereas "cobweb" refers to a seemingly abandoned web. The word "cobweb" is also used by biologists to describe the tangled three-dimensional web of some spiders of the family Theridiidae. While this large family is known as the cobweb spiders, they actually have a range of different webs. Other names for this spider family include tangle-web spiders and comb-footed spiders.
Silk production
When archaic spiders moved from the water to the land in the Early Devonian period, they started making silk to protect their bodies and their eggs. Most spiders have appendages called spinnerets. These are organs that produce silk with which the spiders spin webs.Spiders gradually started using silk for hunting purposes, first as guide lines and signal lines, then as ground or bush webs, and eventually as the aerial webs that are currently familiar.
Spiders produce silk from their spinneret glands located at the tip of their abdomen. Each gland produces a thread for a special purpose – for example a trailed safety line, sticky silk for trapping prey or fine silk for wrapping it. Spiders use different gland types to produce different silks, and some spiders are capable of producing up to eight different silks during their lifetime.
Most spiders have three pairs of spinnerets, each having its own function – there are also spiders with just one pair and others with as many as four pairs.
Webs allow a spider to catch prey without having to expend energy by running it down, making it an efficient method of gathering food. The hair and claws on spiders' legs allow them to cling to their webs. The oils on their bodies keep them from sticking to their own webs. However these energy savings are somewhat offset by the fact that constructing the web is in itself energetically costly, due to the large amount of protein required in the form of silk. In addition, after a time the silk will lose its stickiness and thus become inefficient at capturing prey. It is common for spiders to eat their own web daily to recoup some of the energy used in spinning. Through ingestion and digestion, the silk proteins are thus recycled. Due to the incredible strength of spider silk, scientists are currently studying it in the hope of creating a super-tough material with similar properties.
Types
There are a few types of spider webs found in the wild, and many spiders are classified by the webs they weave. Different types of spider webs include:- Spiral orb webs, associated primarily with the family Araneidae, as well as Tetragnathidae and Uloboridae
- Tangle webs or cobwebs, associated with the family Theridiidae
- Funnel webs, with associations divided into primitive and modern
- Tubular webs, which run up the bases of trees or along the ground
- Sheet webs
Orb web construction
Most orb weavers construct webs in a vertical plane, although there are exceptions, such as Uloborus diversus, which builds a horizontal web. During the process of making an orb web, the spider will use its own body for measurements. There is variation in web construction among orb-weaving spiders, in particular, the species Zygiella x-notata is known for its characteristic missing sector web crossed by a single signal thread.Many webs span gaps between objects which the spider could not cross by crawling. This is done by first producing a fine adhesive thread to drift on a faint breeze across a gap. When it sticks to a surface at the far end, the spider feels the change in the vibration. The spider reels in and tightens the first strand, then carefully walks along it and strengthens it with a second thread. This process is repeated until the thread is strong enough to support the rest of the web.
After strengthening the first thread, the spider continues to make a Y-shaped netting. The first three radials of the web are now constructed. More radials are added, making sure that the distance between each radial and the next is small enough to cross. This means that the number of radials in a web directly depends on the size of the spider plus the size of the web. It is common for a web to be about 20 times the size of the spider building it.
After the radials are complete, the spider fortifies the center of the web with about five circular threads. It makes a spiral of non-sticky, widely spaced threads to enable it to move easily around its own web during construction, working from the inside outward. Then, beginning from the outside and moving inward, the spider methodically replaces this spiral with a more closely spaced one made of adhesive threads. It uses the initial radiating lines as well as the non-sticky spirals as guide lines. The spaces between each spiral and the next are directly proportional to the distance from the tip of its back legs to its spinners. This is one way the spider uses its own body as a measuring/spacing device. While the sticky spirals are formed, the non-adhesive spirals are removed as there is no need for them any more.
After the spider has completed its web, it chews off the initial three center spiral threads then sits and waits, usually with the head facing downwards. If the web is broken without any structural damage during the construction, the spider does not make any initial attempts to rectify the problem.
The spider, after spinning its web, then waits on or near the web for a prey animal to become trapped. The spider senses the impact and struggle of a prey animal by vibrations transmitted through the web. A trap line is constructed by some species specifically to transmit this vibration. A spider positioned in the middle of the web makes for a highly visible prey for birds and other predators, even without web decorations; many day-hunting orb-web spinners reduce this risk by hiding at the edge of the web with one foot on a signal line from the hub or by appearing to be inedible or unappetizing.
Spiders do not usually adhere to their own webs, because they are able to spin both sticky and non-sticky types of silk, and are careful to travel across only non-sticky portions of the web. However, they are not immune to their own glue. Some of the strands of the web are sticky, and others are not. For example, if a spider has chosen to wait along the outer edges of its web, it may spin a non-sticky prey or signal line to the web hub to monitor web movement. However, in the course of spinning sticky strands, spiders have to touch these sticky strands. They do this without sticking by using careful movements, dense hairs and nonstick coatings on their feet to prevent adhesion.
Uses
Some spiders use their webs for hearing, where the giant webs function as extended and reconfigurable auditory sensors.Not all use their webs for capturing prey directly, instead pouncing from concealment or running them down in open chase. The net-casting spider balances the two methods of running and web spinning in its feeding habits. This spider weaves a small net which it attaches to its front legs. It then lurks in wait for potential prey and, when such prey arrives, lunges forward to wrap its victim in the net, bite and paralyze it. Hence, this spider expends less energy catching prey than a primitive hunter such as the wolf spider. It also avoids the energy loss of weaving a large orb web.
Many species also spin threads of silk to catch the wind and then sail on the wind to a new location.
Others manage to use the signaling-snare technique of a web without spinning a web at all. Several types of water-dwelling spiders rest their feet on the water's surface in much the same manner as an orb-web user. When an insect falls onto the water and is ensnared by surface tension, the spider can detect the vibrations and run out to capture the prey.
The diving bell spider and Desis marina, an intertidal species, use their web to trap air under water, where they can stay submerged long periods of time.
Human use
s, which began during the 16th century in a remote valley of the Austrian Tyrolean Alps, were created on fabrics consisting of layered and wound cobwebs, stretched over cardboard to make a mat, and strengthened by brushing with milk diluted in water. A small brush was then used to apply watercolor to the cobwebs, or custom tools to create engravings. Fewer than a hundred cobweb paintings survive today, most of which are held in private collections.In traditional European medicine, cobwebs were used on wounds and cuts to reduce bleeding and aid healing. This use was recorded in ancient Greece and Rome, and was mentioned in Shakespeare's A Midsummer Night's Dream. Spider webs have been shown to significantly reduce wound healing times. They are rich in vitamin K, which is essential in blood clotting, and their large surface area is also thought to help coagulation. During the 1st century BC, the Roman army used spider webs as field dressings, which also served as a fungicide.
The effects of some drugs can be measured by examining their effects on a spider's web-building.
In northeastern Nigeria, cow horn resonators in traditional xylophones often have holes covered with spider webs to create a buzzing sound.
Spider web strands have been used for crosshairs or reticles in telescopes.
Development of technologies to mass-produce spider silk has led to the manufacturing of prototype military protection, wound dressings and other medical devices, and consumer goods.
Spider webs can be used as a single step catalyst to make nanoparticles.