Spean Bridge railway station
Spean Bridge railway station is a railway station serving the village of Spean Bridge in the Highland region of Scotland. This station is on the Highland Line, between Roy Bridge and Fort William, sited from Craigendoran Junction, near Helensburgh. ScotRail manage the station and operate most services, along with Caledonian Sleeper.
History
The station opened on 7 August 1894 and was laid out with two platforms, one on either side of a crossing loop. There were sidings on the north side of the station. The station buildings were designed by James Miller.Between 1903 and December 1933, there was a branch line from this station which offered service north up the Great Glen to Fort Augustus, terminating at a pier on Loch Ness. The North British railway extended Spean Bridge adding a bay platform at the west end at a cost of £303 0s 5d to accommodate Invergarry and Fort Augustus Railway trains. The signalling instruments were moved from the I&FA box at the junction to the booking office at the insistence of the Board of Trade inspector.
The I&FA line was not successful. Passenger services stopped in 1933 and the line was eventually abandoned completely in 1947.
The station was host to a LNER camping coach from 1936 to 1939. A camping coach was also positioned here by the Scottish Region from 1961 until all camping coaches in the region were withdrawn at the end of the 1969 season.
Signalling
From the time of its opening in 1894, the West Highland Railway was worked throughout by the electric token system. Alterations in connection with the construction of the line to Fort Augustus saw the original Spean Bridge signal box replaced by two new boxes in 1901. Spean Bridge Junction box was subsidiary to Spean Bridge Station box. The Junction box closed on 20 September 1921. The most recent signal box at Spean Bridge, which opened on 28 August 1949, was located on the Up platform. It contained 30 levers.Spean Bridge lost all its semaphore signals on 2 March 1986, in preparation for Radio Electronic Token Block signalling. The RETB system was commissioned by British Rail between and Fort William Junction on 29 May 1988. This resulted in the closure of Spean Bridge signal box and others on that part of the line. The RETB is controlled from a Signalling Centre at Banavie railway station.
The Train Protection & Warning System was installed in 2003.