SSh-68
The SSh-68 - is a steel combat helmet of the Soviet and then Russian Armed Forces. The SSh-68 is a further development of the SSh-60 helmet. It differs primarily in its greater strength, greater front slope of the dome and the shorter outer edge. It is usually painted in dark green.
The SSh-68 was used by the armed forces of the Soviet Union and its Warsaw Pact allies, and others. Today, it is still in service in most countries of the CIS, as well as Vietnam and Afghanistan.
History
Due to the introduction of improved helmets starting with the original 6B7, the SSh-68 was progressively withdrawn from service. In the Russian Armed Forces, the final examples are being gradually replaced by the newer 6B7-1M and 6B47 helmets.Design
The helmet weighs 1,300 grams. SSh-68 provides protection from impact shock, and steel fragments weighing 1.0 grams at speeds up to 250 m/s. The SSh-68 is not meant to protect against bullets.Sizing
SSh-68 are available in three different sizes, P1, P2, and P3. P1 is good to about a 58 head, size 2 is between about 59 and 61 and size 3 is from 61 up. SSh-68s are not sized as NATO helmets are since they are designed to be able to adjust for soldiers to wear an Ushanka or other heavy hat underneath it during the winter.Helmet sizes 1, 2, and 3 of the standard steel variant with the leatherette liner weighs 1.3 kg, 1.3 kg, and 1.32 kg respectively.
Dimensions
The standard steel variants have different dimensions depending on the size.Size 1 dimensions 280/270/170mm
Size 2 dimensions 290/270/170 mm
Size 3 dimensions '''300/260/175 mm'''
Variants
- SSh-68M/СШ-68М - A modernization of SSh-68 by installing an aramid fiber liner, called SVM, inside the helmet, as well as modern harness belt and restraint systems. As a result, the mass of the helmet is increased to 1.9 kg. The helmet is designed by "Special equipment and communication", for the personnel of the Russian Ministry of the Interior Internal Troops. The SSh-68M provides head protection of class 1. It's manufactured by NII Stali.
- SSh-68N "blank"/Заготовка - Modernization of SSh-68 by increasing the thickness of the aramid membrane inside the helmet, as well as by the installation of modern harness belt and restraint systems. As a result, the mass of the helmet is increased to 2 kg. This helmet is designed for the personnel of the Russian armed forces. The helmet protects the head in class 1, as well as from fragments of steel of spherical mass of 1.1 g up to 400 m/s.
Users
Current
- − Donations made from Moscow in October 2017.
- − Limited numbers still in service as of 2022.
Former
- − Used in the 1990s, replaced by more modern Kevlar helmets.