Single instruction, multiple data is a class of parallel computers in Flynn's taxonomy. It describes computers with multiple processing elements that perform the same operation on multiple data points simultaneously. Such machines exploit data level parallelism, but not concurrency: there are simultaneous computations, but only a single process at a given moment. SIMD is particularly applicable to common tasks such as adjusting the contrast in a digital image or adjusting the volume of digital audio. Most modern CPU designs include SIMD instructions to improve the performance of multimedia use. SIMD is not to be confused with SIMT, which utilizes threads.


The first use of SIMD instructions was in the ILLIAC IV, which was completed in 1966.
SIMD was the basis for vector supercomputers of the early 1970s such as the CDC Star-100 and the Texas Instruments ASC, which could operate on a "vector" of data with a single instruction. Vector processing was especially popularized by Cray in the 1970s and 1980s. Vector-processing architectures are now considered separate from SIMD computers, based on the fact that vector computers processed the vectors one word at a time through pipelined processors, whereas modern SIMD computers process all elements of the vector simultaneously.
The first era of modern SIMD computers was characterized by massively parallel processing-style supercomputers such as the Thinking Machines CM-1 and CM-2. These computers had many limited-functionality processors that would work in parallel. For example, each of 65,536 single-bit processors in a Thinking Machines CM-2 would execute the same instruction at the same time, allowing, for instance, to logically combine 65,536 pairs of bits at a time, using a hypercube-connected network or processor-dedicated RAM to find its operands. Supercomputing moved away from the SIMD approach when inexpensive scalar MIMD approaches based on commodity processors such as the Intel i860 XP became more powerful, and interest in SIMD waned.
The current era of SIMD processors grew out of the desktop-computer market rather than the supercomputer market. As desktop processors became powerful enough to support real-time gaming and audio/video processing during the 1990s, demand grew for this particular type of computing power, and microprocessor vendors turned to SIMD to meet the demand. Hewlett-Packard introduced MAX instructions into PA-RISC 1.1 desktops in 1994 to accelerate MPEG decoding. Sun Microsystems introduced SIMD integer instructions in its "VIS" instruction set extensions in 1995, in its UltraSPARC I microprocessor. MIPS followed suit with their similar MDMX system.
The first widely deployed desktop SIMD was with Intel's MMX extensions to the x86 architecture in 1996. This sparked the introduction of the much more powerful AltiVec system in the Motorola PowerPC's and IBM's POWER systems. Intel responded in 1999 by introducing the all-new SSE system. Since then, there have been several extensions to the SIMD instruction sets for both architectures.
All of these developments have been oriented toward support for real-time graphics, and are therefore oriented toward processing in two, three, or four dimensions, usually with vector lengths of between two and sixteen words, depending on data type and architecture. When new SIMD architectures need to be distinguished from older ones, the newer architectures are then considered "short-vector" architectures, as earlier SIMD and vector supercomputers had vector lengths from 64 to 64,000. A modern supercomputer is almost always a cluster of MIMD computers, each of which implements SIMD instructions. A modern desktop computer is often a multiprocessor MIMD computer where each processor can execute short-vector SIMD instructions.


An application that may take advantage of SIMD is one where the same value is being added to a large number of data points, a common operation in many multimedia applications. One example would be changing the brightness of an image. Each pixel of an image consists of three values for the brightness of the red, green and blue portions of the color. To change the brightness, the R, G and B values are read from memory, a value is added to them, and the resulting values are written back out to memory.
With a SIMD processor there are two improvements to this process. For one the data is understood to be in blocks, and a number of values can be loaded all at once. Instead of a series of instructions saying "retrieve this pixel, now retrieve the next pixel", a SIMD processor will have a single instruction that effectively says "retrieve n pixels". For a variety of reasons, this can take much less time than retrieving each pixel individually, as with traditional CPU design.
Another advantage is that the instruction operates on all loaded data in a single operation. In other words, if the SIMD system works by loading up eight data points at once, the add operation being applied to the data will happen to all eight values at the same time. This parallelism is separate from the parallelism provided by a superscalar processor; the eight values are processed in parallel even on a non-superscalar processor, and a superscalar processor may be able to perform multiple SIMD operations in parallel.


To remedy problems 1 and 5, RISC-V's vector extension and ARM's Scalable Vector Extension use an alternative approach: instead of exposing the subregister-level details to the programmer, the instruction set abstracts them out as 32 "vector registers" that use the same interfaces across all CPUs with this instruction set. Alignment requirements that stem from the vector size are handled in hardware.


Examples of SIMD supercomputers :
Small-scale SIMD became popular on general-purpose CPUs in the early 1990s and continued through 1997 and later with Motion Video Instructions for Alpha. SIMD instructions can be found, to one degree or another, on most CPUs, including the IBM's AltiVec and SPE for PowerPC, HP's PA-RISC Multimedia Acceleration eXtensions, Intel's MMX and iwMMXt, SSE, SSE2, SSE3 SSSE3 and SSE4.x, AMD's 3DNow!, ARC's ARC Video subsystem, SPARC's VIS and VIS2, Sun's MAJC, ARM's NEON technology, MIPS' MDMX and MIPS-3D. The IBM, Sony, Toshiba co-developed Cell Processor's SPU's instruction set is heavily SIMD based. NXP, founded by Philips, developed several SIMD processors named Xetal. The Xetal has 320 16-bit processor elements especially designed for vision tasks.
Modern graphics processing units are often wide SIMD implementations, capable of branches, loads, and stores on 128 or 256 bits at a time.
Intel's latest AVX-512 SIMD instructions now process 512 bits of data at once.


SIMD instructions are widely used to process 3D graphics, although modern graphics cards with embedded SIMD have largely taken over this task from the CPU. Some systems also include permute functions that re-pack elements inside vectors, making them particularly useful for data processing and compression. They are also used in cryptography. The trend of general-purpose computing on GPUs may lead to wider use of SIMD in the future.
Adoption of SIMD systems in personal computer software was at first slow, due to a number of problems. One was that many of the early SIMD instruction sets tended to slow overall performance of the system due to the re-use of existing floating point registers. Other systems, like MMX and 3DNow!, offered support for data types that were not interesting to a wide audience and had expensive context switching instructions to switch between using the FPU and MMX registers. Compilers also often lacked support, requiring programmers to resort to assembly language coding.
SIMD on x86 had a slow start. The introduction of 3DNow! by AMD and SSE by Intel confused matters somewhat, but today the system seems to have settled down and newer compilers should result in more SIMD-enabled software. Intel and AMD now both provide optimized math libraries that use SIMD instructions, and open source alternatives like libSIMD, SIMDx86 and SLEEF have started to appear.
Apple Computer had somewhat more success, even though they entered the SIMD market later than the rest. AltiVec offered a rich system and can be programmed using increasingly sophisticated compilers from Motorola, IBM and GNU, therefore assembly language programming is rarely needed. Additionally, many of the systems that would benefit from SIMD were supplied by Apple itself, for example iTunes and QuickTime. However, in 2006, Apple computers moved to Intel x86 processors. Apple's APIs and development tools were modified to support SSE2 and SSE3 as well as AltiVec. Apple was the dominant purchaser of PowerPC chips from IBM and Freescale Semiconductor and even though they abandoned the platform, further development of AltiVec is continued in several PowerPC and Power ISA designs from Freescale and IBM.
SIMD within a register, or SWAR, is a range of techniques and tricks used for performing SIMD in general-purpose registers on hardware that doesn't provide any direct support for SIMD instructions. This can be used to exploit parallelism in certain algorithms even on hardware that does not support SIMD directly.

Programmer interface

It is common for publishers of the SIMD instruction sets to make their own C/C++ language extensions with intrinsic functions or special datatypes guaranteeing the generation of vector code. Intel, AltiVec, and ARM NEON provide extensions widely adopted by the compilers targeting their CPUs.
The GNU C Compiler takes the extensions a step further by abstracting them into a universal interface that can be used on any platform. The LLVM Clang compiler also implements the feature.
At WWDC 2015, Apple announced SIMD Vectors support for version 2.0 of their new programming language Swift.
Microsoft added SIMD to.NET in RyuJIT. Use of the libraries that implement SIMD on.NET are available in NuGet package .

SIMD multi-versioning

Consumer software is typically expected to work on a range of CPUs covering multiple generations, which could limit the programmer's ability to use new SIMD instructions to improve the computational performance of a program. The solution is to include multiple versions of the same code that uses either older or newer SIMD technologies, and pick one that best fits the user's CPU at run-time. There are two main camps of solutions:
The former solution is supported by the Intel C++ Compiler and GNU Compiler Collection since GCC 6. However, since GCC requires explicit labels to "clone" functions, an easier way to do so is to compile multiple versions of the library and let the system glibc choose one, an approach adopted by the Intel-backed Clear Linux project.

SIMD on the web

In 2013 John McCutchan announced that he had created a high-performance interface to SIMD instruction sets for the Dart programming language, bringing the benefits of SIMD to web programs for the first time. The interface consists of two types:
Instances of these types are immutable and in optimized code are mapped directly to SIMD registers. Operations expressed in Dart typically are compiled into a single instruction without any overhead. This is similar to C and C++ intrinsics. Benchmarks for 4×4 matrix multiplication, 3D vertex transformation, and Mandelbrot set visualization show near 400% speedup compared to scalar code written in Dart.
McCutchan's work on Dart, now called SIMD.js, has been adopted by ECMAScript and Intel announced at IDF 2013 that they are implementing McCutchan's specification for both V8 and SpiderMonkey. However, by 2017, SIMD.js has been taken out of the ECMAScript standard queue in favor of pursuing a similar interface in WebAssembly. As of 2019, the WebAssembly interface remains unfinished.
Emscripten, Mozilla's C/C++-to-JavaScript compiler, with extensions can enable compilation of C++ programs that make use of SIMD intrinsics or GCC-style vector code to the SIMD API of JavaScript, resulting in equivalent speedups compared to scalar code.

Commercial applications

Though it has generally proven difficult to find sustainable commercial applications for SIMD-only processors, one that has had some measure of success is the GAPP, which was developed by Lockheed Martin and taken to the commercial sector by their spin-off Teranex. The GAPP's recent incarnations have become a powerful tool in real-time video processing applications like conversion between various video standards and frame rates, deinterlacing, image noise reduction, adaptive video compression, and image enhancement.
A more ubiquitous application for SIMD is found in video games: nearly every modern video game console since 1998 has incorporated a SIMD processor somewhere in its architecture. The PlayStation 2 was unusual in that one of its vector-float units could function as an autonomous DSP executing its own instruction stream, or as a coprocessor driven by ordinary CPU instructions. 3D graphics applications tend to lend themselves well to SIMD processing as they rely heavily on operations with 4-dimensional vectors. Microsoft's Direct3D 9.0 now chooses at runtime processor-specific implementations of its own math operations, including the use of SIMD-capable instructions.
One of the recent processors to use vector processing is the Cell Processor developed by IBM in cooperation with Toshiba and Sony. It uses a number of SIMD processors and is geared towards the huge datasets required by 3D and video processing applications. It differs from traditional ISAs by being SIMD from the ground up with no separate scalar registers.
Ziilabs produced an SIMD type processor for use on mobile devices, such as media players and mobile phones.
Larger scale commercial SIMD processors are available from ClearSpeed Technology, Ltd. and Stream Processors, Inc. ClearSpeed's CSX600 has 96 cores each with two double-precision floating point units while the CSX700 has 192. Stream Processors is headed by computer architect Bill Dally. Their Storm-1 processor contains 80 SIMD cores controlled by a MIPS CPU.