Retrobright
Retrobright is a hydrogen peroxide-based process for removing yellowing from ABS plastics.
Yellowing in ABS plastic occurs when it is exposed to UV light or excessive heat, which causes photo-oxidation of polymers that breaks polymer chains and causes the plastic to yellow and become brittle.
History
One method of reversing the yellowed discoloration was first discovered in 2007 in a German retrocomputing forum, before spreading to an English blog where it was further detailed. The process has been continually refined since.Composition
Retrobright consists of hydrogen peroxide, a small amount of the "active oxygen" laundry booster TAED as a catalyst, and a source of UV.The optimum mixture and conditions for reversing yellowing of plastics:
- A hydrogen peroxide solution. Hydrogen peroxide-based hair bleaching creams available at beauty supply stores can also be used, and are viscous, allowing them to be applied with less waste. The cream must be carefully applied and wrapped evenly with plastic wrap to avoid streaks in the final product.
- Approximately 1 ml per 3 liters of tetraacetylethylenediamine -based laundry booster.
- A source of ultraviolet light, from sunlight or a UV lamp.
Alternatives
may also be used by dissolving it in water and following the usual steps for hydrogen peroxide, as it is sodium carbonate and hydrogen peroxide in a crystalline form.Ozone gas can also be used for retrobrighting, as long as an ozone generator, a suitable container of sufficient size and a source of UV are available, but can take longer than other methods.
A simpler but slower process involving merely exposure of the yellowed plastic to bright sunlight has been described, variously called 'Sunbrighting' or 'Lightbrighting'. This has both empirical evidence of effectiveness and the theoretical backing of some , which emphasises exposure to strong visible light while minimising ultraviolet exposure.