RCAF Station Yorkton

RCAF Station Yorkton was a Second World War air training station located near Yorkton, Saskatchewan, Canada.

History

World War II

The Royal Canadian Air Force, opened No. 11 Service Flying Training School at RCAF Station Yorkton on 10 April 1941. No. 11 SFTS was closed on 1 December 1944 and the following month No. 23 Elementary [Flying Training School] was relocated to Yorkton from RCAF Station Davidson on 29 January 1945. No. 23 EFTS was closed 15 August 1945. The schools and station were a component of the British Commonwealth Air Training Plan. The station was decommissioned shortly thereafter.
Construction of the station began in 1940. The facility was opened on June 11, 1941, and the first commander was Group Captain George R. Howsam. The school consisted of 40 buildings, including a mess hall, a 35-bed hospital, and hangars to shelter 200 planes.

Aerodrome information

The airfield was constructed in a typical BCATP wartime pattern, with six runways formed in an overlaid triangle. The aerodrome in Yorkton, however, had two additional runways running roughly north–south on the east side of the overlaid triangle.
In approximately 1942 the aerodrome was listed as RCAF Aerodrome - Yorkton, Saskatchewan at with a variation of 16 degrees east and elevation of. Eight runways were listed as follows:

Runway name	Length	Width	Surface
8/26			Hard surfaced
8/26			Hard surfaced
3/21			Hard surfaced
3/21			Hard surfaced
12/30			Hard surfaced
12/30			Hard surfaced
17/35			Hard surfaced
17/35			Hard surfaced

Relief landing field – Sturdee

The primary Relief Landing Field for RCAF Station Yorkton was located approximately 6 miles south-east. The site was located approximately 1 mile south of the unincorporated community of Calley, Saskatchewan. The Relief field was laid out in the standard triangular pattern.
In approximately 1942 the aerodrome was listed as RCAF Aerodrome - Sturdee, Saskatchewan at with a variation of 16 degrees east and elevation of. Three runways were listed as follows:

Runway name	Length	Width	Surface
1/19			Hard
13/31			Hard
7/25			Hard

Relief landing field – Rhein

The secondary Relief Landing Field for RCAF Station Yorkton was located approximately 12 miles north-east. The site was located approximately 3.5 miles south of the community of Rhein, Saskatchewan. The Relief field was turf with a triangular runway layout.
In approximately 1942 the aerodrome was listed as RCAF Aerodrome - Rhein, Saskatchewan at with a variation of 16 degrees east and elevation of. Three runways were listed as follows:

Runway name	Length	Width	Surface
2/20			Turf
13/31			Turf
8/26			Turf