Priestly's Hydraulic Ram
Priestly's Hydraulic Ram, located in Gooding County, Idaho near Hagerman, Idaho, was a hydraulic ram invented and built. It was used to move water uphill to irrigate agricultural land on the plateau above the Snake River. It was located about south of Hagerman at Thousand Springs. The area is now Thousand Springs State Park. It was listed on the National Register of Historic Places in 1975.
History
The ram was started by William W. Priestly to capture water, which emerged from the Snake River Aquifer on the north slope of the Snake River Canyon as spring-fed waterfalls and pump it to the top of the cliff. The ram utilized the force of the falling water to pump the water up the cliff.Priestly started work on the project in 1888, intending to develop an irrigation system for the farmland south of Hagerman. The ram, although credited to Priestly, may have actually been built in 1901–02 by David Hyde. During its construction, a competitor, North Side Irrigation, developed an alternative system and the ram was apparently never used commercially. It was reported to have been functional in 1901.
According to an alternative account, Priestly built the ram in 1894 and was successful raising water and using it for irrigation at that time. He then turned his attention to gold mining, and used the same air-ram principle in the construction of a gold dredge in 1896.
Description
The ram used diameter pipes to collect spring water, mixed with air, and send it falling downhill into a metal reservoir tank. The design of the tank caused the water to drain out into the river while harnessing the kinetic energy of the falling water to force air uphill through a second pipe to the reservoir tank of a second smaller ram that was fed with water dropped from a higher spring via a third pipe. The air pressure from the two rams was combined to push water to the top of the cliff through a fourth smaller pipe.According to the NRHP nomination form, "Priestly's hydraulic ram, a pump with not one moving part, was considered truly marvelous."
Although a similar but less sophisticated ram was built in Arizona several years before, Priestly is believed to have designed his ram independently. Similar devices were built around that time. The technology did not find widespread use because the devices, which were about 70% efficient, were soon eclipsed by more efficient pumps powered by steam, gasoline, and electricity.
The ram is notable because "few such original developments in the field of power transmission have been made anywhere in the United States."