Piper PA-28 Cherokee


The Piper PA-28 Cherokee is a family of two-seat or four-seat light aircraft built by Piper Aircraft and designed for flight training, air taxi and personal use. The PA-28 family of aircraft comprises all-metal, unpressurized, single piston-engined airplanes with low mounted wings and tricycle landing gear. They have a single door on the right side, which is entered by stepping on the wing.
The PA-28 is the fourth most produced aircraft in history. The first PA-28 received its type certificate from the Federal Aviation Administration in 1960 and the series remains in production to this day. The Archer was discontinued in 2009, but with investment from new company ownership, the model was put back into production in 2010. As of 2024, five models were in production; the Archer TX and LX, the diesel-powered Archer DX and DLX, and the Pilot '100i'.
The PA-28 series competed with the now discontinued, similarly low-winged Grumman American AA-5 series and Beechcraft Musketeer designs and continues to compete with the high-winged Cessna 172.
Piper has created variations within the Cherokee family by installing engines ranging from 140 to 300 hp, offering turbocharging, retractable landing gear, constant-speed propellers and stretching the fuselage to accommodate six people. The Piper PA-32 is a larger, six-seat variant of the PA-28. The PA-32R Saratoga variant was in production until 2009.

Development

At the time of the Cherokee's introduction, Piper's primary single-engined, all-metal aircraft was the Piper PA-24 Comanche, a larger, faster aircraft with retractable landing gear and a constant-speed propeller. Karl Bergey, Fred Weick and John Thorp designed the Cherokee as a less expensive alternative to the Comanche, with lower manufacturing and parts costs to compete with the Cessna 172, although some later Cherokees also featured retractable gear and constant-speed propellers.
The Cherokee and Comanche lines continued in parallel production, serving different market segments for over a decade, until Comanche production was ended in 1972, to be replaced by the Piper PA-32R family.

Original design

The original Cherokees were the Cherokee , which started production in 1961.
In 1962, Piper added the Cherokee 180 powered by a Lycoming O-360 engine. The extra power made it practical to fly with all four seats filled and the model remains popular on the used-airplane market. In 1968, the cockpit was modified to replace the "push-pull"-style engine throttle controls with quadrant levers. In addition, a third window was added to each side, giving the fuselage the more modern look seen in most recent production.
Piper continued to expand the line rapidly. In 1963, the company introduced the even more powerful Cherokee 235, which competed favorably with the Cessna 182 Skylane for load-carrying capability. The Cherokee 235 featured a Lycoming O-540 engine de-rated to and a longer wing which would eventually be used for the Cherokee Six. It included tip tanks of capacity each, bringing the total fuel capacity of the Cherokee 235 to. The aircraft had its fuselage stretched in 1973, giving more leg room in the rear. The stabilator area was also increased. In 1973, the marketing name was changed from "235" to "Charger". In 1974, it was changed again to "Pathfinder". Production of the Pathfinder continued until 1977. No 1978 models were built. In 1979, the aircraft was given the Piper tapered wing and the name was changed again, this time to Dakota.
In 1964, the company filled in the bottom end of the line with the Cherokee , which was designed for training and initially shipped with only two seats. The PA-28-140 engine was slightly modified shortly after its introduction to produce, but kept the -140 name.
In 1967, Piper introduced the PA-28R-180 Cherokee Arrow. This aircraft featured a constant-speed propeller and a retractable landing gear and was powered by a Lycoming IO-360-B1E engine. A version powered by a Lycoming IO-360-C1C was offered as an option beginning in 1969 and designated the PA-28R-200; the model was dropped after 1971. At the time the Arrow was introduced, Piper removed the Cherokee 150 and Cherokee 160 from production.
The Arrow II came out in 1972, featuring a fuselage stretch to increase legroom for the rear-seat passengers. In 1977, Piper introduced the Arrow III, which featured a semi-tapered wing and longer stabilator, a design feature that had previously been introduced successfully on the PA-28-181 which provided better low-speed handling. It also featured larger fuel tanks, increasing capacity from.
The first turbocharged model, the PA-28R-201T, was also offered in 1977, powered by a six-cylinder Continental TSIO-360-F engine equipped with a Rajay turbocharger. A three-bladed propeller was optional.
In 1979, the Arrow was restyled again as the PA-28RT-201 Arrow IV, featuring a "T" tail.
In 1971, Piper released a Cherokee 140 variant called the Cherokee Cruiser 2+2. Although the plane kept the 140 designation, it was, in fact, a plane and was shipped mainly as a four-seat version. In 1973, the Cherokee 180 was named the Cherokee Challenger and had its fuselage lengthened slightly and its wings widened and the Cherokee 235 was named the Charger with similar airframe modifications. In 1974, Piper changed the marketing names of some of the Cherokee models again, renaming the Cruiser 2+2 simply the Cruiser, the Challenger to the Archer, and the Charger to Pathfinder.
Piper reintroduced the Cherokee 150 in 1974, renaming it the Cherokee Warrior and giving it the Archer's stretched body and a new, semi-tapered wing.
In 1977, Piper stopped producing the Cruiser and Pathfinder, but introduced a new plane, the Dakota, based on the Cherokee 235, Charger, and Pathfinder models, but with the new semi-tapered wing.
The PA-28-201T Turbo Dakota followed the introduction of the PA-28-236 Dakota in 1979. The airframe was essentially the same as a fixed-gear Arrow III and was powered by a turbocharged Continental TSIO-360-FB engine producing. The aircraft did not sell well and production ended in 1980.
In 1977, Piper upgraded the Warrior to PA-28-161, changing its name to Cherokee Warrior II. This aircraft had slightly improved aerodynamic wheel fairings introduced in 1978. Later models of the Warrior II, manufactured after July 1982, incorporated a gross weight increase to, giving a useful load over. This same aircraft, now available with a glass cockpit, was available as the Warrior III and was marketed as a training aircraft.

PA-32

In 1965, Piper developed the Piper Cherokee Six, designated the PA-32, by stretching the PA-28 design. It features a lengthened fuselage and seating for one pilot and five passengers.

Brazilian, Argentine and Chilean production

PA-28s were built under license in Brazil as the Embraer EMB-711A and EMB-711C Corisco, EMB-711B, EMB-711T and EMB-711ST Corisco Turbo and the EMB-712 Tupi. Chincul SACAIFI of San Juan, Argentina produced the type in Argentina, building 960 airplanes between 1972 and 1995, including the Cherokee Archer, Dakota, Arrow and Turbo Arrow. The PA-28-236 Dakota was also assembled under license by the Maintenance Wing of the Chilean Air Force. By September 1982, 20 Dakotas had been assembled in Chile.

New Piper Aircraft

The original Piper Aircraft company declared bankruptcy in 1991. In 1995, the New Piper Aircraft company was created. It was renamed Piper Aircraft once again in 2006. The company originally produced one variant, the 180-horsepower Archer LX, and began testing two diesel versions, with 135 and 155 hp.
As of 2022, five variants of the PA-28 were in production:
  • Archer TX and LX with a Lycoming IO-360-A4M engine, a TAS maximum cruise speed, range and a Garmin G1000 avionics suite
  • Archer DX and DLX with a Continental CD-155 engine, a TAS maximum cruise speed, range and a Garmin G1000 avionics suite
  • Pilot 100i with a Lycoming IO-360-B4A engine, a TAS maximum cruise speed, range and Garmin G3X avionics.

    Design

Wing

Originally, all Cherokees had a constant-chord, rectangular planform wing, popularly called the "Hershey Bar" wing because of its resemblance to the convex, rectangular chocolate bar.
Beginning with the Warrior in 1974, Piper switched to a semi-tapered wing with the NACA 652-415 profile and a wingspan. The constant chord is maintained from the root to mid-wing, at which point a tapered section sweeping backwards on the leading edge continues until the tip. Both Cherokee wing variants have an angled wing root; i.e., the wing chord is greater at the root, with the leading edge swept back as it leaves the fuselage body, rather than the wing meeting the body at a perpendicular angle.
Debate is ongoing about the relative benefits of the two wing shapes. According to the Cherokee's lead designer, Fred Weick, the semi-tapered wing was introduced to "improve stall characteristics and increase wingspan," and side-by-side testing of the two shapes found that with the semitapered wing, "the plane had better climb and flatter flight characteristics" The original 1974 version of the wing had a structural weakness that caused a structural failure during an aerobatic maneuver, but that was fixed for all later wings. According to Terry Lee Rogers, "the outboard wing sections had a different taper than the wing root, which permitted them to retain control even when the inboard sections were stalled."
However, designer John Thorp, who collaborated with Weick in the late 1950s on an early 180 hp version of the PA-28 and was not involved in the later semi-tapered design, publicly disagreed: "Tapered wings tend to stall outboard, reducing aileron effectiveness and increasing the likelihood of a rolloff into a spin."
Aviation journalist Peter Garrison also favors the Hershey-bar wing, saying that the semitapered shape has a neutral effect on drag: "to prevent tip stall, designers have resorted to providing the outboard portions of tapered wings with more cambered airfoil sections, drooped or enlarged leading edges, fixed or automatic leading edge slots or slats and most commonly, wing twist or 'washout'. The trouble with these fixes is that they all increase the drag, cancelling whatever benefit the tapered wing was supposed to deliver in the first place."