Neutrodyne
The Neutrodyne radio receiver, invented in 1922 by Louis Hazeltine, was a particular type of tuned radio frequency receiver, in which the instability-causing inter-electrode capacitance of the triode RF tubes is cancelled out or "neutralized" to prevent parasitic oscillations which caused "squealing" or "howling" noises in the speakers of early radio sets. In most designs, a small extra winding on each of the RF amplifiers' tuned anode coils was used to generate a small antiphase signal, which could be adjusted by special variable trim capacitors to cancel out the stray signal coupled to the grid via plate-to-grid capacitance. The Neutrodyne circuit was popular in radio receivers until the 1930s, when it was superseded by the superheterodyne receiver.
History
Early tuned radio-frequency receivers were difficult to operate at high gain because their RF amplifier stages were unstable. A major issue at the time was the high interelectrode capacitance of triode vacuum tubes, causing unintended feedback between plate and grid circuits. This often led to oscillation. These oscillations produced audible whistles or “howling,” a problem noted in contemporary training texts. The difficulty arose mainly from the electrical characteristics of the tubes then available, rather than from the TRF architecture itself.Earlier work by Charles W. Rice at General Electric described tube amplifier circuits that intentionally applied an opposing voltage to cancel grid–plate capacitive coupling. This approach is now recognized as an early example of neutralization, but it was limited to specific tube stages and was not generalized as a circuit method.
To address the instability caused by interelectrode capacitance, Louis Hazeltine developed a method for canceling capacitive coupling by introducing an equal and opposite feedback path, later known as neutralization. Hazeltine filed patents on this technique beginning in 1919, describing it as a general method for suppressing capacity coupling between circuits. He described its application to tuned radio-frequency amplification and complete receiver circuits in a 1923 paper. Neutralization was later described in standard engineering texts as a method for stabilizing triode RF amplifiers in tuned radio-frequency receivers.
In 1922, Harold A. Wheeler, working in Hazeltine’s laboratory at Stevens Institute of Technology, developed practical adjustment methods that made neutralization usable in multi-stage receivers. These techniques formed the practical basis of the Neutrodyne receiver.
By the 1930s, advances in vacuum tube manufacturing had yielded the tetrode, which had reduced control grid to plate capacitance. These advances made it possible to build TRF receivers that did not need neutralization, but also made Edwin Armstrong's superheterodyne design practical for domestic receivers. So the TRF circuit, including the Neutrodyne, became obsolete in radio receivers and was superseded by the superheterodyne design.
The Neutrodyne neutralization technique continues to be used in other applications to suppress parasitic oscillation, such as in RF power amplifiers in radio transmitters.
Image:68-471-A Neutrodyne NR-5 Radio, USS Mayflower.jpg|thumb|Neutrodyne receiver used on US President Warren Harding's yacht, the ''Mayflower''